; This is an advanced configuration example for ODR-DabMux, ; that documents more options that the simple example.mux ; More information about the usage of the tools is available ; in the guide, which can be found on the ; www.opendigitalradio.org website. ; ; The format is called INFO format, and defined by boost property_tree: ; http://www.boost.org/doc/libs/1_41_0/doc/html/boost_propertytree/parsers.html#boost_propertytree.parsers.info_parser ; It consists of six mandatory sections, whose relative order in this ; file are of no importance. ; The general section defines global multiplex parameters. general { ; the DAB Transmission mode (values 1-4 accepted) dabmode 1 ; the number of ETI frames to generate (set to 0 to get an unlimited number) nbframes 10 ; boolean fileds can accept either false or true as values: ; Enable logging to syslog syslog false ; Write the SCCA field useful for the Factum ETI analyser writescca false ; Enable timestamp definition necessary for SFN ; This also enables time encoding using the MNSC and in EDI. tist false ; On startup, the timestamp is initialised to system time. If you want ; to add an offset, uncomment the following line and give a number ; in seconds. ; tist_offset 0 ; The management server is a simple TCP server that can present ; statistics data (buffers, overruns, underruns, etc) ; which can then be graphed a tool like Munin ; The doc/stats_dabmux_multi.py tool is a suitable ; plugin for that. ; If the port is zero, or the line commented, the server ; is not started. managementport 12720 } remotecontrol { ; enable the telnet remote control server on the given port ; This server allows you to read and define parameters that ; some features export. It is only accessible from localhost. ; Set the port to 0 to disable the server telnetport 12721 ; the remote control server makes use of the unique identifiers ; for the subchannels, services and components. Make sure you ; chose them so that you can identify them. } ; Some ensemble parameters ensemble { ; Example for Switzerland, with country id=4 and ECC=E1 id 0x4fff ; you can also use decimal if you want ecc 0xe1 ; Extended Country Code local-time-offset auto ; autmatically calculate from system local time ; or ;local-time-offset 1 ; in hours, supports half-hour offsets international-table 1 ; See TS 101 756 clause 5.7 ; 1 corresponds to the PTy used in RDS ; 2 corresponds to program types used in north america ;reconfig-counter 1 ; Uncomment this option to enable FIG0/7, which specifies that ; the ensemble is compliant to EN 300 401 version 2 ; This setting sets the Count field of FIG0/7, which is a ; modulo-1024 binary counter that increments by one for every multiplex reconfiguration. ; all labels are maximum 16 characters in length label "OpenDigitalRadio" ; The short label is built from the label by erasing letters, and cannot ; be longer than 8 characters. If omitted, it will be truncated from the ; label shortlabel "ODR" ; Announcement settings for FIG0/19. announcements { test_announcement { cluster 1 flags { Traffic true } subchannel sub-fu } } } ; Definition of DAB services services { ; Each service has it's own unique identifier, that is ; used throughout the configuration file and for the RC. srv-fu { id 0x4daa label "Funk" shortlabel "Fu" ; Programme Type, according to the chosen international-table above. pty 0 ; chose between static and dynamic PTy ; static means the PTy represents to overall genre of the programme. ; dynamic means the PTy follows the various items within a programme. ; Use the RC interface to modify at runtime. ; See EN 300 401 Clause 8.1.5 pty-sd static language 0 ; also supports id ; List of announcement switching flags signalled in FIG 0/18 ; This lists all possible announcements. If one is left out, it is disabled. announcements { Alarm false Traffic true Travel false Warning false News false Weather false Event false Special false ProgrammeInfo false Sports false Finance false ; a comma separated list of clusters in which the service belongs to clusters "1,2" } } srv-ri { ; If your ensemble contains a service from another country, ; specify its ECC here. Example is for Italy, country id=5, ECC=E0 id 0x5dab ecc 0xe0 label "rick" } srv-lu { id 0x4dac label "Lu" ; pty, language, shortlabel and id can be omitted, and will take default values } } ; The subchannels are defined in the corresponding section. ; supported types are : audio, data, enhancedpacket, ; dabplus, packet ; ; Type 'packet' expects to receive data in the format described ; in EN 300 401 Clause 5.3.2. ; ; 'enhancedpacket' mode will calculate FEC for MSC packet mode ; as described in EN 300 401 Clause 5.3.5. ; ; 'data' will read from the source and write it unmodified into ; the MSC. subchannels { sub-fu { type audio bitrate 128 id 10 ; type audio subchannels automatically use ; UEP, unless the bitrate is 8, 16, 24, 40 or 144kbit/s ; (EN 300 401 Clause 6.2.1) ; this can be overridden with the option protection-profile protection-profile EEP_A ; supported options: UEP (use only for type audio!) ; EEP_A (for all bitrates) ; EEP_B (bitrates multiple of 32kbit/s) ; Set the protection level, possible values depend ; on the protection profile: ; UEP profile: 1 to 5; EEP profiles: 1 to 4 protection 4 ; example file input inputproto file inputuri "funk.mp2" nonblock false } sub-lu { type dabplus bitrate 96 id 3 protection 3 ; EXPERIMENTAL! ; Receive STI-D(LI) carried in STI(PI, X) inside RTP using UDP. ; This is intended to be compatible with AVT audio encoders. ; EXPERIMENTAL! inputproto sti inputuri "rtp://127.0.0.1:32010" } sub-ri { type dabplus bitrate 96 id 1 protection 1 ; example file input ;inputuri "rick.dabp" ; example zmq input: ; Accepts connections to port 9000 from any interface. inputproto zmq inputuri "tcp://*:9000" ; ZMQ specific options, mandatory: ; Maximum size of input buffer, in AAC frames (24ms) ; when this buffer size is reached, some frames will be ; discarded to get the size again below this value. ; As the present implementation discards entire AAC superframes, ; (5 frames = 120ms) the effect will clearly be audible. zmq-buffer 40 ; At startup or after an underrun, the buffer is filled to this ; amount of AAC frames before streaming starts. zmq-prebuffering 20 ; In an ideal scenario, where the input rate exactly corresponds ; to the rate at which the frames are consumed by dabmux, you ; see the buffer level staying around the zmq-prebuffering value. ; Network latency jitter can make it temporarily go lower or higher. ; Encoder clock drift will make the buffer either slowly fill or ; empty, which will create intermittent glitches. ; the ZMQ inputs support encryption using the CURVE method. ; The multiplexer must have a public and a private key, which ; can be shared among several zmq inputs. ; ; each encoder also has a public and private key, and the ; encoder *public* key has to be known to the multiplexer. ; Using this system, the multiplexer can be sure that ; only the encoder possessing the right secret key can ; connect here. This inhibits third parties to hijack the ; input. ; by default, it is disabled, set encryption to 1 to enable encryption true ; the multiplexer key pair. Keep these secret. secret-key "keys/mux.sec" public-key "keys/mux.pub" ; The public key from the encoder. Only the encoder you want ; to accept must know the corresponding secret key. encoder-key "keys/encoder1.pub" ; key pairs can be generated using the zmqinput-keygen tool. } ; 'prbs' will generate a pseudorandom bit sequence according to ; ETS 300 799 Clause G.2.1. This is useful for testing purposes and ; measurement of bit error rate. sub-prbs { type data bitrate 16 id 5 protection 3 ; Use the default PRBS polynomial. inputproto prbs inputuri "prbs://" ; To use another polynomial, set it in the url as hexadecimal ; The default polynomial is G(x) = x^20 + x^17 + 1, represented as ; (1 << 20) + (1 << 17) + (1 << 0) = 0x120001 ;inputuri "prbs://:0x120001 } } ; For now, each component links one service to one subchannel components { ; the component unique identifiers are used for the RC. comp-fu { ; specifies audio -or- packet type, defaults to zero when not given ; audio: foreground=0, background=1, multi-channel=2 ; data: unspecified=0, TMC=1, EWS=2, ITTS=3, paging=4, TDC=5, IP=59, MOT=60, proprietary=61 type 0 ; According to specification, you should not define component labels if ; the service is only used in one component. The service label is sufficient ; in that case. ;label "funk" ;shortlabel "fu" service srv-fu subchannel sub-fu ; for audio components, the field figtype 0x2 ; defines the User Application Type according to TS 101 756 Table 16: ; 0x2 : MOT Slideshow ; 0x3 : MOT Broadcast Web Site ; 0x4 : TPEG ; 0x5 : DGPS ; 0x6 : TMC ; 0x7 : EPG ; 0x8 : DAB Java ; 0x44a : Journaline ; If not defined, the FIG 0/13 is not transmitted for this component ; for packet components, the fields ; "user application type in FIG 0/13 for packet mode" ;figtype ; and the packet address (mandatory) ;address ; are supported, with the same syntax as in the manpage. ; FIG 0/13 is only transmitted when figtype is defined. ; The -d option on the command line is: ;datagroup (true|false) ; and defaults to false. You should normally set ;datagroup true ; if your packet mode subchannel is tranferring an MOT application such ; as EPG or Slideshow. } ; If a service is used in more than one component, the primary component has to ; be placed above the secondary component(s) to ensure that the SCIdS field of FIG0/8 ; is zero for the primary service component. (New in EN 300 401 V2.1.1) comp-lu { service srv-lu subchannel sub-lu figtype 0x2 } comp-ri { service srv-ri subchannel sub-ri figtype 0x2 } } outputs { ; The unique-id can be used by the remote control or the statistics server ; to identify the output ; Important! For real-time operation, you need to have exactly one ; output that applies back-pressure to ODR-DabMux, otherwise it will run ; at the highest possible rate on your system! ; ; For an output to a pipe, the data consumer at the other end of the pipe ; will dictate the multiplexing rate to ODR-DabMux. ; ; If you use the zmq or EDI outputs, you must also enable a simul:// output! ;supported output types for file and fifo outputs are ; raw, framed and streamed ; ; Please see doc/dab_output_formats.txt ;stdout "fifo:///dev/stdout?type=raw" ; Throttle output to real-time (one ETI frame every 24ms) throttle "simul://" edi { ; If TIST is enabled, requires leap-second information (see example.mux) destinations { ; The names you give to the destinations have no meaning, ; but have to be unique. You can give them meaningful names to help ; you identify the outputs. example_unicast { ; example for unicast EDI over UDP ; for unicast EDI, do not set source protocol udp destination "192.168.23.23" sourceport 13000 } example_multicast { ; example for multicast EDI, the source IP is required ; so that the data is sent on the correct ethernet interface protocol udp destination "232.20.10.1" source "192.168.0.50" ; The multicast TTL has to be adapted according to your network ttl 1 sourceport 13000 } example_tcp { ; example for EDI TCP server. TCP is reliable, so it is counterproductive to ; use FEC. Using PFT also brings no benefit. protocol tcp listenport 13000 ; For every connected endpoint, a queue is created. If the queue overflows, we ; assume the endpoint has a problem, and we close the connection. This sets ; the max queue size in number of frames. With PFT disabled, one frame is generated ; every 24ms. With PFT enabled, it depends on fragmentation and FEC settings. ; ; default value: 500 frames, without PFT: 12s worth of EDI data ;max_frames_queued 500 } } ; The settings below apply to all destinations ; The destination port cannot be set independently for ; different outputs because it is encoded in the transport ; header of the PFT layer. ; Necessary when using UDP, optional when only using TCP. port 12000 ; Enable the PFT subsystem. If false, AFPackets are sent. ; PFT is not necessary when using TCP. enable_pft false ; How many lost fragments can be recovered by Reed-Solomon. ; Requires enable_pft true. ; ; If set to 0, the PFT subsystem will only do Fragmentation and ; Transport, but no Reed Solomon. ; See ETSI TS 102 821, Clause 7 "PFT Layer", Figure 10. ODR-DabMux ; supports "Fragmentation and Transportation" and "Reed-Solomon and ; Transportation". fec 2 ; Interleave fragments from several ETI frames so as to reduce the ; probability of errors when several UDP packets are lost in bursts. ; This comes at the cost of larger overall latency between multiplexing ; and modulation. This latency is given in milliseconds, and rounded ; to nearest multiple of 24ms. Set to 0 to disable the interleaver. interleave 0 ; Length of a RS chunk, can be overridden ;default=207 ;chunk_len 207 ; Save the packets sent over Ethernet to the file ./edi.debug dump false ; show more debugging info verbose false ; (optional) set the kind of alignment to use in TAG Packets ; 0: no padding ; 8: pad to eight bytes (default) ; above 8: insert *dmy TAG Item to pad to given size in bytes ;tagpacket_alignment 8 } ; Other outputs: ; ZeroMQ output example, new configuration format. Several ; zeromq blocks can be added here. ; This output does not back-pressure the multiplexer. ;zeromq { ; Listen on all interfaces, on port 9100 ;endpoint "tcp://*:9100" ; Transmit backward compatible metadata containing ; EDI time and UTC offset when TIST is enabled. ; ; If TIST is enabled, requires leap-second information (see example.mux) ; ; WARNING! requires ODR-DabMux to be compiled with ; cURL support, and this will enable leap second download ; as for the EDI output! ;allowmetadata true ;} ; Legacy format for ZeroMQ output example. See example.mux ; for newer format. ;zmq "zmq+tcp://*:9100" ; Output ETI-over-TCP. This is like piping a RAW ETI NI data stream ; into a TCP socket, except that the output can handle simultaneous ; connections. Not suitable for SFN use because timestamps are incomplete. ; 0.0.0.0 means "listen on all interfaces" ; This output does not back-pressure the multiplexer. ;tcp "tcp://0.0.0.0:9200" ; UDP send to host:port, simple example for unicast ;net_udp "udp://host:port" ; example with source and TTL specification for multicast ;net_udp "udp://237.10.0.230:7000?src=10.0.1.125&ttl=1" ; RAW for farsync ETI card ;farsync "raw://sync0" ; the output also supports two parameters: ; clocking=master and clocking=slave ; ; and extsyncclock which enables external clock sync. Its value is the ; external clock frequency in Hz. ; Example: ;farsync "raw://sync0?clocking=master&extsyncclock=10000000" }