1 files changed, 66 insertions, 0 deletions
diff --git a/man/odr-zmq2edi.1 b/man/odr-zmq2edi.1
new file mode 100644
index 0000000..91e8888
--- /dev/null
+++ b/man/odr-zmq2edi.1
@@ -0,0 +1,66 @@
+.TH ODR-ZMQ2EDI "1" "April 2022" "" "User Commands"
+.SH NAME
+\fBodr-zmq2edi\fR \- Convert an ZeroMQ stream to EDI
+.SH SYNOPSIS
+odr\-zmq2edi [options] <source>
+.PP
+<source> is a ZMQ URL that points to a ODR\-DabMux ZMQ output.
+.SH DESCRIPTION
+zmq2edi can receive a ZMQ ETI stream from ODR-DabMux and generate an EDI stream.
+This is quite useful if your modulator wants EDI input, and your network is not 
+good enough making you want to use something based on TCP.
+.PP
+The input socket will be reset if no data is received for 10 seconds.
+It is best practice to run this tool under a process supervisor that will restart it automatically.
+.SH OPTIONS
+.SS "The following options can be given only once:"
+.TP
+\fB\-w\fR <delay>
+Keep every ETI frame until TIST is <delay> milliseconds after current system time.
+Negative delay values are also allowed.
+.TP
+\fB\-C\fR <path to script>
+Before starting, run the given script, and only start if it returns 0.
+This is useful for checking that NTP is properly synchronised
+.TP
+\fB\-x\fR
+Drop frames where for which the wait time would be negative, i.e. frames that arrived too late.
+.TP
+\fB\-P\fR
+Disable PFT and send AFPackets.
+.TP
+\fB\-f\fR <fec>
+Set the FEC.
+.TP
+\fB\-i\fR <spread>
+Configure the UDP packet spread/interleaver with given percentage: 0% send all fragments
+at once, 100% spread over 24ms, >100% spread and interleave. Default 95%
+.TP
+\fB\-D\fR
+Dump the EDI to edi.debug file.
+.TP
+\fB\-v\fR
+Enables verbose mode.
+.TP
+\fB\-a\fR <alignement>
+Set the alignment of the TAG Packet (default 8).
+.TP
+\fB\-b\fR <backoff>
+Number of milliseconds to backoff after an input reset (default 5000).
+.SS
+The following options can be given several times, when more than one UDP destination is desired:
+.TP
+\fB\-d\fR <destination ip>
+Set the destination ip.
+.TP
+\fB\-p\fR <destination port>
+Set the destination port.
+.TP
+\fB\-s\fR <source port>
+Set the source port.
+.TP
+\fB\-S\fR <source ip>
+Select the source IP in case we want to use multicast.
+.TP
+\fB\-t\fR <ttl>
+Set the packet's TTL.