summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/advanced.mux7
-rw-r--r--doc/example.mux13
2 files changed, 15 insertions, 5 deletions
diff --git a/doc/advanced.mux b/doc/advanced.mux
index 99ed4c8..4543998 100644
--- a/doc/advanced.mux
+++ b/doc/advanced.mux
@@ -276,20 +276,21 @@ components {
; FIG 0/13 is only transmitted when figtype is defined.
; The -d option on the command line is:
;datagroup (true|false)
- ; and defaults to false.
+ ; and defaults to false. You should normally set
+ ;datagroup true
+ ; if your packet mode subchannel is tranferring an MOT application such
+ ; as EPG or Slideshow.
}
comp-lu {
service srv-lu
subchannel sub-lu
-
figtype 0x2
}
comp-ri {
service srv-ri
subchannel sub-ri
-
figtype 0x2
}
}
diff --git a/doc/example.mux b/doc/example.mux
index c7f1f2d..5a65829 100644
--- a/doc/example.mux
+++ b/doc/example.mux
@@ -153,10 +153,18 @@ outputs {
; Output RAW ETI NI to standard output
stdout "fifo:///dev/stdout?type=raw"
- ; ZeroMQ output example
+ ; ZeroMQ output example
+ ; This output does not back-pressure the multiplexer.
; Listen on all interfaces, on port 9100
;zmq "zmq+tcp://*:9100"
+ ; Output ETI-over-TCP. This is like piping a RAW ETI NI data stream
+ ; into a TCP socket, except that the output can handle simultaneous
+ ; connections.
+ ; 0.0.0.0 means "listen on all interfaces"
+ ; This output does not back-pressure the multiplexer.
+ ;tcp "tcp://0.0.0.0:9200"
+
; Throttle output to real-time (one ETI frame every 24ms)
;throttle "simul://"
@@ -167,6 +175,7 @@ outputs {
; For an output to a pipe, the data consumer at the other end of the pipe
; will dictate the multiplexing rate to ODR-DabMux.
;
- ; If you use the zmq output, you must also enable a simul:// output!
+ ; If you use the zmq+tcp:// or the tcp:// output,
+ ; you must also enable a simul:// output!
}