diff options
Diffstat (limited to 'ChangeLog')
| -rw-r--r-- | ChangeLog | 386 |
1 files changed, 0 insertions, 386 deletions
diff --git a/ChangeLog b/ChangeLog deleted file mode 100644 index 307023f..0000000 --- a/ChangeLog +++ /dev/null @@ -1,386 +0,0 @@ -This file contains information about the changes done to -ODR-DabMux in this repository - -2019-06-25: Matthias P. Braendli <matthias@mpb.li> - (v2.4.1): - Fix bug when odr-zmq2edi is used with more than one destination. - -2019-06-07: Matthias P. Braendli <matthias@mpb.li> - (v2.4.0): - Add timestamp offset setting, and fix bug due to UTCO offset - not being properly applied. See doc/TIMESTAMPS.rst for more - details. - Implement FIG2 labels. - Fix bug for DAB MP2 in EEP_A. - Fix FIG0/24 for DAB+ services. - ODR-ZMQ2EDI: fix MNSC endianness swap bug. - Pull some RC changes from ODR-DabMod. - Implement EDI-over-TCP output. - -2019-01-07: Matthias P. Braendli <matthias@mpb.li> - (v2.3.1): - Happy new year! - Fix TAI bulletin parsing on systems where long is 32 bit. - Add configurable URLs to download TAI clock bulletin and - rework the download logic. - Do not read TAI clock cache file from /tmp anymore, only - use /var/tmp. - -2018-10-30: Matthias P. Braendli <matthias@mpb.li> - (v2.3.0): - Correct FIG0/6 output for services with different ECC. - Add support for transmitting empty Linkage Sets. - Save leap-second cache to /var/tmp, which doesn't get - cleared across reboots. - Rework audio level measurement in the statistics server to - alleviate some timing-related issues. - odr-zmq2edi: Add option to drop late packets. - -2018-07-31: Matthias P. Braendli <matthias@mpb.li> - (v2.2.0): - Fix delays and FIG repetition burst on announcement switching. - Add support for services with different ECC (Signalled in FIG0/9). - Improve ODR-ZMQ2EDI statistics. - -2018-05-29: Matthias P. Braendli <matthias@mpb.li> - (v2.1.2): - A couple of internal changes and fixes for - compilation warnings. - -2018-03-27: Matthias P. Braendli <matthias@mpb.li> - (v2.1.1): - Fix segmentation fault in peak audio statistics - calculation. - -2018-03-23: Matthias P. Braendli <matthias@mpb.li> - (v2.1.0): - Add version string to management server. - Introduce slow audio peak statistic. - Avoid doing useless copies in the RAW output. - -2018-03-01: Matthias P. Braendli <matthias@mpb.li> - (v2.0.0): - Configuration file syntax changed for Frequency Information - and Other Services settings. - Statistics server changes: audio-level peak information is - measured over the last second, and not anymore since the last - request. Same for buffers, where min/max are measured over - thirty seconds. - Make nonblock available again for file inputs. - -2018-02-09: Matthias P. Braendli <matthias@mpb.li> - (v1.3.3): - Add dynamic/static PTy setting to configuration. - Add UTF-8 to EBU Latin character set converter for labels. - Show TAI bulletin expiration in RC. - Stop using SUBDIRS in automake, and build the executable in ./ and not - in ./src anymore. - -2018-01-23: Matthias P. Braendli <matthias@mpb.li> - (v1.3.2): - Add clock selection to RAW output. - zmq2edi: intentionnally crash after timeout. - Add command "state" to the monitoring interface and add to Munin - script. - Fix TAI bulletin download failure handling. - Improve portability for non-Linux POSIX systems, and improve - autoconf checks. - Default international-table to 1. - -2017-08-23: Matthias P. Braendli <matthias@mpb.li> - (v1.3.1): - Add retords.pl script for Xymon monitoring tool. - Add odr-zmq2edi tool, and add necessary metadata to - the ZMQ output of ODR-DabMux. The configuration file - was extended in a backward-compatible way. Handling - of the TAI clock subsystem has been adapted too. - -2017-06-30: Matthias P. Braendli <matthias@mpb.li> - (v1.3.0): - Add support for FIG0/24 to announce that a service is present - in another ensemble. This completes the implementation of all - service linking FIGs according to ETSI TS 103 176 Figure 1. - Allow EDI packet lengths up to 1400 bytes. - Add local cache for the leap second information downloaded from - IETF, remove download from USNO servers, as they don't give validity - information. - -2017-06-05: Matthias P. Braendli <matthias@mpb.li> - (v1.2.2): - Add support for FIG0/21 "Frequency Information". - Improve EDI fragment interleaver. - Avoid stalling the multiplexer when the TCP output is used. - -2017-01-29: Matthias P. Braendli <matthias@mpb.li> - (v1.2.1): - Bugfix for illegal memory access in EDI PFT layer. - Add experimental STI-D(PI, X)/RTP input. - -2017-01-24: Matthias P. Braendli <matthias@mpb.li> - (v1.2.0): - Remove the libfec dependency. - Adapt several FIGs to EN 300 401 V2.1.1. - Add FIG0/6 for service linking information. - Big overhaul of all inputs. - TCP output improvements, stability and handling of multiple - connections. - Fix ZeroMQ input encryption for MPEG inputs. - Rework PRBS source and describe it better. - Remove unused bridge, SLIP, Test and nonfunctional - DMB input. - Add fragment interleaver for the EDI output. - Fix important issue when both EDI and TIST are enabled. - Enable syslog logger earlier. - -2016-09-02: Matthias P. Braendli <matthias@mpb.li> - (v1.1.0): - Switch FIG0/10 to long form, the latest draft spec marks the - short form as legacy. - Add RC support for deferred triggering of announcements, see - doc/remote_control.txt - -2016-07-30: Matthias P. Braendli <matthias@mpb.li> - (v1.0.0): - Remove old carousel. - Fix FIGs 0/2 and 0/8 when data services present. - Fix parsing of TAI-UTC bulletin for EDI TIST. - ZeroMQ is now a mandatory dependency because of the ManagementServer. - Minor bugfixes and improvements. - -2016-03-26: Matthias P. Braendli <matthias@mpb.li> - (v0.9.0): - Enable new carousel by default. - Integrate munin script improvements. - EDI bugfix when many CU are used. - EDI: add support for PFT with FEC=0 (only fragmentation). - EDI: backward-incompatible configuration change. - EDI: transmit timestamp with TAI vs UTC correction (experimental). - Get compilation working under FreeBSD and OSX. - Add ability to specify source and TTL for UDP output. - Split example.mux into a simple and a more advanced example. - -2015-11-27: Matthias P. Braendli <matthias@mpb.li> - (v0.8.1): - Fix compilation with test input. - Add PTy to remote control. - Add EDI options to configuration file for multicast settings. - -2015-09-13: Matthias P. Braendli <matthias@mpb.li> - (v0.8.0): - Pad labels with spaces instead of terminating them with NUL. - Modify real-time priority. - Refactor big mux loop into separate function. - Add ability to read out full configuration tree in JSON. - Remove old command-line interface. - Fix EDI errors. - Replace TCP socket for Statistics and Management server by ZMQ - REP/REQ. - Start activities on a simple web GUI for monitoring and configuration. - Add new FIG carousel, not enabled by default. - Add utility to drive a FarSync card from a ZMQ ETI stream. - Improve FIG0/13 signalling (DG flag, CAOrg removal) - Add announcement support (FIG0/18 and 0/19) - -2015-07-27: Matthias P. Braendli <matthias@mpb.li> - (v0.7.5): - Fix segmentation fault in short label check logic. - -2015-07-03: Matthias P. Braendli <matthias@mpb.li> - (v0.7.4): - Allow empty component labels - Fix compilation with ZeroMQ 4.1.x - -2015-04-10: Matthias P. Braendli <matthias@mpb.li> - (v0.7.3): - Security: RC only listens on localhost. - Change FIG signalisation handling for User Application Type, - which has an impact on Slideshow. - -e parameter becomes optional. - Improve error messages and documentation. - Start some activities for a web-based GUI. - -2014-09-26: Matthias P. Braendli <matthias@mpb.li> - (v0.7.2): - Fix a memory leak with the ZMQ input. - Fix handling of timestamps when using ZMQ input. - Add the experimental EDI output. - Support new ZeroMQ frame format also for toolame-dab. - Update FarSync driver to latest version. - When used without configuration file, LTO defaults to auto, - TM defaults to 1. - Add protection profile option to configuration. - -2014-05-20: Matthias P. Braendli <matthias@mpb.li> - (v0.7.1): - This is a bugfix release, with a minor update - to the input state server. - * odr-dabmux: - Fix -r command line option. - Correct internal allocation/deallocation mistakes. - Add "Silent" state to input states. - Little changes in munin graph script. - -2014-04-25: Matthias P. Braendli <matthias@mpb.li> - (v0.7.0): - This version supports a new ZeroMQ frame format. The - old format is still used by toolame-dab, and by - older versions of fdk-aac-dabplus, and will stay - supported. - * odr-dabmux: - Add local-time-offset to remote control, - and support 'auto' setting in configuration file. - Update the munin script. - Support the new ZeroMQ framing format. - Support ZeroMQ CURVE authentication. - Make ZeroMQ buffering better configurable. - Include peak audio level in munin statistics. - -2014-04-04: Matthias P. Braendli <matthias@mpb.li> - (v0.6.0): - Adds support for MOT Slideshow and DLS, - compatible with mot-encoder from - fdk-aac-dabplus - * odr-dabmux: - Add FIG0/13 signalling for MOT slideshow - Add local-time-offset and intl table options - Fix some unseen compilation warnings - Change ZMQ output format to guarantee frame - alignment (not backward compatible) - -2014-02-14: Matthias P. Braendli <matthias@mpb.li> - (v0.5.0): - * odr-dabmux: - Service and component labels can now be changed on - the fly using the remote control. - ZMQ input buffer size can be changed using the RC. - Modify the RC 'list' command to simplify usage. - Clean up the startup configuration dump. - Added fault checking logic to RC that can restart - it in case of a failure. - Add doc/remote_control.txt - -2014-02-12: Matthias P. Braendli <matthias@mpb.li> - (v0.4.3): - * odr-dabmux: - Add support for hexadecimal IDs in configuration file. - Add ZMQ input for toolame-dab. - -2014-02-11: Matthias P. Braendli <matthias@mpb.li> - (v0.4.2) - * odr-dabmux: - Actually add zmq.hpp to Makefile.am - (v0.4.1) - * odr-dabmux: - Include zmq.hpp locally and prefer it over the - system one. - Fix wrong usage of zmq::socket_t.recv - -2014-02-07: Matthias P. Braendli <matthias@mpb.li> - (v0.4.0) - * odr-dabmux: - CRC-DabMux renamed to ODR-DabMux - Version bump to 0.4.0 - -2014-01-31: Matthias P. Braendli <matthias@mpb.li> - (tag r12): - * crc-dabmux: - Create new object-oriented abstraction for the - inputs, with a wrapper for all existing inputs - Adapt inputZMQ to the new internal interface - Add a telnet Remote Control interface - -2014-01-31: Matthias P. Braendli <matthias@mpb.li> - (tag r11): - * crc-dabmux: - Replace TCPLog by Logger that supports syslog - Add TCP statistics server - Make ZMQ input publish buffer statistics - Add Munin helper script to graph ZMQ input stats - Fix ZMQ include when inputzmq disabled - -2014-01-05: Matthias P. Braendli <matthias@mpb.li> - (tag r10): - * crc-dabmux: - Add ZeroMQ input, compatible with fdk-aac-dabplus-zmq - Replace CRC-DabMux-cfg with -e option - -2013-12-14: Matthias P. Braendli <matthias@mpb.li> - (tag r9): - * autotools: - Remove autogenerated files and add bootstrap - Fix faulty logic for --enable-output-zeromq - Update version generation for git - -2013-11-10: Matthias P. Braendli <matthias@mpb.li> - (tag r8): - * crc-dabmux: - Some configuration parsing and logging fixes. - Replaced the C-style function dispatching for the outputs - by C++ objects with inheritance. - Added support for ZeroMQ ETI output. - ZeroMQ dependency added in configure.ac - Versioning changed to make hg revision visible - Completed READMEs and INSTALLs - -2012-09-13: Matthias P. Braendli <matthias@mpb.li> - (tag r7): - * crc-dabmux/src/*: - Added shortlabel support to configuration file - Added Boost version check into autoconf - -2012-08-26: Matthias P. Braendli <matthias@mpb.li> - (tag r6): - * crc-dabmux/src/DabMux.h: - Added missing file DabMux.h - -2012-08-23: Matthias P. Braendli <matthias@mpb.li> - (tag r5): - * crc-dabmux/*: - Refactoring command line handling for crc-dabmux, - added configuration file parser including example. - When the program is called as CRC-DabMux-cfg, it reads - the Ensemble definition from a file rather than from - the command line. An example file is in doc/ - DabMux now depends on Boost. - -2012-08-17: Matthias P. Braendli <matthias@mpb.li> - (tags r4, r3, r2 and r1 were relevant to crc-dabmod in the old repository) - -2011-05-24 Pascal Charest <pascal.charest@crc.ca> - - * src/DabMux.cpp: Changed for more precise messages. - * src/DabMux.cpp: Added ECC support. - * src/dabInputFile.cpp: Removed unused macros, which solved unitialised bug. - * src/dabInputPacketFile.cpp: Removed unused macros, which solved unitialised bug. - -2010-08-23 Pascal Charest <pascal.charest@crc.ca> - - * src/DabMux.cpp: Added UDP input for data subchannel (bug). - -2010-06-24 Pascal Charest <pascal.charest@crc.ca> - - * src/DabMux.cpp: Added support for timestamp. - -2010-06-17 Pascal Charest <pascal.charest@crc.ca> - - * src/DabMux.cpp: Solved FIC date bug. - -Copyright (C) 2010,2011 Her Majesty the Queen in Right of Canada -(Communications Research Center Canada) - -Copyright (C) 2013,2014 Matthias P. Braendli, http://mpb.li - -This file is part of ODR-DabMux. - -ODR-DabMux is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as -published by the Free Software Foundation, either version 3 of the -License, or (at your option) any later version. - -ODR-DabMux is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with ODR-DabMux. If not, see <http://www.gnu.org/licenses/>. |