summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--doc/example.mux45
-rw-r--r--src/ParserConfigfile.cpp102
-rw-r--r--src/dabInputZmq.h18
3 files changed, 110 insertions, 55 deletions
diff --git a/doc/example.mux b/doc/example.mux
index 1dbec7d..26a231c 100644
--- a/doc/example.mux
+++ b/doc/example.mux
@@ -97,10 +97,6 @@ subchannels {
type audio
; example file input
inputfile "funk.mp2"
- ; example zmq input:
- ; accept connections to port 9001 from any interface
- ; use toolame-dab as encoder
- ;inputfile "tcp://*:9001"
nonblock false
bitrate 128
id 10
@@ -119,24 +115,49 @@ subchannels {
; example file input
;inputfile "rick.dabp"
; example zmq input:
- ; accept connections to port 9000 from any interface
- ; use fdk-aac-dabplus-zmq as encoder
+ ; Accepts connections to port 9000 from any interface.
+ ; Use fdk-aac-dabplus as encoder
inputfile "tcp://*:9000"
- nonblock false
bitrate 96
id 1
protection 1
+
+ ; ZMQ specific options, mandatory:
+
+ ; Maximum size of input buffer, in AAC frames (24ms)
+ ; when this buffer size is reached, some frames will be
+ ; discarded to get the size again below this value.
+ ; As the present implementation discards entire AAC superframes,
+ ; (5 frames = 120ms) the effect will clearly be audible.
+ zmq-buffer 40
+
+ ; At startup or after an underrun, the buffer is filled to this
+ ; amount of AAC frames before streaming starts.
+ zmq-prebuffering 20
+
+ ; In an ideal scenario, where the input rate exactly corresponds
+ ; to the rate at which the frames are consumed by dabmux, you
+ ; see the buffer level staying around the zmq-prebuffering value.
+ ; Network latency jitter can make it temporarily go lower or higher.
+ ; Encoder clock drift will make the buffer either slowly fill or
+ ; empty, which will create intermittent glitches.
}
sub-ri2 {
- type dabplus
- ; for dabplus types, you can use the ZeroMQ input (if compiled in)
- ; with the following configuration:
- inputfile "tcp://localhost:9000"
- nonblock false
+ type audio
+ ; for audio types, you can use the ZeroMQ input (if compiled in)
+ ; with the following configuration in combination with
+ ; toolame-dab
+ ;
+ ; Support for toolame-dab is not as good as with fdk-aac-dabplus
+ inputfile "tcp://*:9001"
bitrate 96
id 1
protection 1
+
+ ; The options are the same as for dabplus
+ zmq-buffer 40
+ zmq-prebuffering 20
}
}
diff --git a/src/ParserConfigfile.cpp b/src/ParserConfigfile.cpp
index f781b78..6b261e5 100644
--- a/src/ParserConfigfile.cpp
+++ b/src/ParserConfigfile.cpp
@@ -585,28 +585,43 @@ void setup_subchannel_from_ptree(dabSubchannel* subchan,
#endif // defined(HAVE_INPUT_FILE)
#if defined(HAVE_INPUT_ZEROMQ)
}
- else if (strcmp(subchan->inputProto, "tcp") == 0) {
+ else if ((strcmp(subchan->inputProto, "tcp") == 0) ||
+ (strcmp(subchan->inputProto, "epmg") == 0) ||
+ (strcmp(subchan->inputProto, "ipc") == 0) ) {
input_is_old_style = false;
- DabInputZmqMPEG* inzmq = new DabInputZmqMPEG(subchanuid);
- inzmq->enrol_at(*rc);
- subchan->input = inzmq;
- subchan->inputName = full_inputName;
- }
- else if (strcmp(subchan->inputProto, "epmg") == 0) {
- etiLog.level(warn) << "Using untested epmg:// zeromq input";
- input_is_old_style = false;
- DabInputZmqMPEG* inzmq = new DabInputZmqMPEG(subchanuid);
- inzmq->enrol_at(*rc);
- subchan->input = inzmq;
- subchan->inputName = full_inputName;
- }
- else if (strcmp(subchan->inputProto, "ipc") == 0) {
- etiLog.level(warn) << "Using untested ipc:// zeromq input";
- input_is_old_style = false;
- DabInputZmqMPEG* inzmq = new DabInputZmqMPEG(subchanuid);
+
+ int buffer_size;
+ int prebuffering;
+ try {
+ buffer_size = pt.get<int>("zmq-buffer");
+ }
+ catch (ptree_error &e) {
+ stringstream ss;
+ ss << "ZMQ Subchannel with uid " << subchanuid <<
+ " has no zmq-buffer defined!";
+ throw runtime_error(ss.str());
+ }
+ try {
+ prebuffering = pt.get<int>("zmq-prebuffering");
+ }
+ catch (ptree_error &e) {
+ stringstream ss;
+ ss << "ZMQ Subchannel with uid " << subchanuid <<
+ " has no zmq-buffer defined!";
+ throw runtime_error(ss.str());
+ }
+ DabInputZmqMPEG* inzmq =
+ new DabInputZmqMPEG(subchanuid, buffer_size, prebuffering);
inzmq->enrol_at(*rc);
subchan->input = inzmq;
subchan->inputName = full_inputName;
+
+ if (strcmp(subchan->inputProto, "epmg") == 0) {
+ etiLog.level(warn) << "Using untested epmg:// zeromq input";
+ }
+ else if (strcmp(subchan->inputProto, "ipc") == 0) {
+ etiLog.level(warn) << "Using untested ipc:// zeromq input";
+ }
#endif // defined(HAVE_INPUT_ZEROMQ)
} else {
stringstream ss;
@@ -643,28 +658,43 @@ void setup_subchannel_from_ptree(dabSubchannel* subchan,
#endif // defined(HAVE_INPUT_FILE)
#if defined(HAVE_INPUT_ZEROMQ)
}
- else if (strcmp(subchan->inputProto, "tcp") == 0) {
+ else if ((strcmp(subchan->inputProto, "tcp") == 0) ||
+ (strcmp(subchan->inputProto, "epmg") == 0) ||
+ (strcmp(subchan->inputProto, "ipc") == 0) ) {
input_is_old_style = false;
- DabInputZmqAAC* inzmq = new DabInputZmqAAC(subchanuid);
- inzmq->enrol_at(*rc);
- subchan->input = inzmq;
- subchan->inputName = full_inputName;
- }
- else if (strcmp(subchan->inputProto, "epmg") == 0) {
- etiLog.level(warn) << "Using untested epmg:// zeromq input";
- input_is_old_style = false;
- DabInputZmqAAC* inzmq = new DabInputZmqAAC(subchanuid);
- inzmq->enrol_at(*rc);
- subchan->input = inzmq;
- subchan->inputName = full_inputName;
- }
- else if (strcmp(subchan->inputProto, "ipc") == 0) {
- etiLog.level(warn) << "Using untested ipc:// zeromq input";
- input_is_old_style = false;
- DabInputZmqAAC* inzmq = new DabInputZmqAAC(subchanuid);
+
+ int buffer_size;
+ int prebuffering;
+ try {
+ buffer_size = pt.get<int>("zmq-buffer");
+ }
+ catch (ptree_error &e) {
+ stringstream ss;
+ ss << "ZMQ Subchannel with uid " << subchanuid <<
+ " has no zmq-buffer defined!";
+ throw runtime_error(ss.str());
+ }
+ try {
+ prebuffering = pt.get<int>("zmq-prebuffering");
+ }
+ catch (ptree_error &e) {
+ stringstream ss;
+ ss << "ZMQ Subchannel with uid " << subchanuid <<
+ " has no zmq-buffer defined!";
+ throw runtime_error(ss.str());
+ }
+ DabInputZmqAAC* inzmq =
+ new DabInputZmqAAC(subchanuid, buffer_size, prebuffering);
inzmq->enrol_at(*rc);
subchan->input = inzmq;
subchan->inputName = full_inputName;
+
+ if (strcmp(subchan->inputProto, "epmg") == 0) {
+ etiLog.level(warn) << "Using untested epmg:// zeromq input";
+ }
+ else if (strcmp(subchan->inputProto, "ipc") == 0) {
+ etiLog.level(warn) << "Using untested ipc:// zeromq input";
+ }
#endif // defined(HAVE_INPUT_ZEROMQ)
} else {
stringstream ss;
diff --git a/src/dabInputZmq.h b/src/dabInputZmq.h
index 11fb49a..a052815 100644
--- a/src/dabInputZmq.h
+++ b/src/dabInputZmq.h
@@ -76,13 +76,14 @@
class DabInputZmqBase : public DabInputBase, public RemoteControllable {
public:
- DabInputZmqBase(const std::string name)
+ DabInputZmqBase(const std::string name,
+ int buffer_size, int prebuffering)
: RemoteControllable(name),
m_zmq_context(1),
m_zmq_sock(m_zmq_context, ZMQ_SUB),
- m_bitrate(0), m_prebuffering(INPUT_ZMQ_DEF_PREBUFFERING),
+ m_bitrate(0), m_prebuffering(prebuffering),
m_enable_input(true),
- m_frame_buffer_limit(INPUT_ZMQ_DEF_BUFFER_SIZE) {
+ m_frame_buffer_limit(buffer_size) {
RC_ADD_PARAMETER(enable,
"If the input is enabled. Set to zero to empty the buffer.");
}
@@ -119,8 +120,9 @@ class DabInputZmqBase : public DabInputBase, public RemoteControllable {
class DabInputZmqMPEG : public DabInputZmqBase {
public:
- DabInputZmqMPEG(const std::string name)
- : DabInputZmqBase(name) {
+ DabInputZmqMPEG(const std::string name,
+ int buffer_size, int prebuffering)
+ : DabInputZmqBase(name, buffer_size, prebuffering) {
RC_ADD_PARAMETER(buffer,
"Size of the input buffer [mpeg frames]");
@@ -134,8 +136,9 @@ class DabInputZmqMPEG : public DabInputZmqBase {
class DabInputZmqAAC : public DabInputZmqBase {
public:
- DabInputZmqAAC(const std::string name)
- : DabInputZmqBase(name) {
+ DabInputZmqAAC(const std::string name,
+ int buffer_size, int prebuffering)
+ : DabInputZmqBase(name, buffer_size, prebuffering) {
RC_ADD_PARAMETER(buffer,
"Size of the input buffer [aac superframes]");
@@ -150,3 +153,4 @@ class DabInputZmqAAC : public DabInputZmqBase {
#endif // HAVE_INPUT_ZMQ
#endif // DAB_INPUT_ZMQ_H
+