Add possibility to set several user application types in FIG0/13

11 files changed, 242 insertions, 158 deletions

diff --git a/doc/advanced.mux b/doc/advanced.mux
index b77744a..9a8c594 100644
--- a/doc/advanced.mux
+++ b/doc/advanced.mux
@@ -297,7 +297,21 @@ components {
         service srv-fu
         subchannel sub-fu
 
-        ; for audio components, the field
+        ; FIG 0/13 user application was previously configured using the figtype setting.
+        ; Now more than one user application can be defined per component, using the
+        ; 'user-applications' entry. Do not use both figtype and user-applications.
+
+        ; If both slideshow (TS 101 499) and SPI (TS 102 818) are carried in PAD, the following
+        ; needs to be set for FIG 0/13 to be transmitted correctly.
+        user-applications {
+            ; Add uaType 0x2 and specify X-PAD App Type = 12
+            userapp "slideshow"
+
+            ; Add uaType 0x7 and specify X-PAD App Type = 16
+            userapp "spi"
+        }
+
+        ; Deprecated figtype setting:
         figtype 0x2
         ; defines the User Application Type according to TS 101 756 Table 16:
         ; 0x2   : MOT Slideshow
@@ -310,19 +324,16 @@ components {
         ; 0x44a : Journaline
         ; If not defined, the FIG 0/13 is not transmitted for this component
 
-        ; for packet components, the fields
-        ; "user application type in FIG 0/13 for packet mode"
-        ;figtype
-        ; and the packet address (mandatory)
+        ; for packet components, set the packet address (mandatory)
         ;address
-        ; are supported, with the same syntax as in the manpage.
-        ; FIG 0/13 is only transmitted when figtype is defined.
-        ; The -d option on the command line is:
-        ;datagroup (true|false)
-        ; and defaults to false. You should normally set
-        ;datagroup true
-        ; if your packet mode subchannel is tranferring an MOT application such
-        ; as EPG or Slideshow.
+        ; Whether to use data groups
+        ;datagroup false
+        ; (defaults to false)
+        ; You should normally set 'datagroup true'
+        ; if your packet mode subchannel is transferring an MOT application such
+        ; as SPI/EPG or Slideshow.
+
+        ; If you specify the user-application "spi", FIG0/13 will set the user application data to "basic profile"
     }
 
     ; If a service is used in more than one component, the primary component has to
@@ -332,13 +343,17 @@ components {
     comp-lu {
         service srv-lu
         subchannel sub-lu
-        figtype 0x2
+        user-applications {
+            userapp "slideshow"
+        }
     }
 
     comp-ri {
         service srv-ri
         subchannel sub-ri
-        figtype 0x2
+        user-applications {
+            userapp "slideshow"
+        }
     }
 }
 
diff --git a/doc/example.mux b/doc/example.mux
index 862906f..92a644d 100644
--- a/doc/example.mux
+++ b/doc/example.mux
@@ -260,6 +260,11 @@ components {
     comp-ri {
         service srv-ri
         subchannel sub-ri
+
+        ; If the programme contains slideshow, please also specify the user-application:
+        user-applications {
+            userapp "slideshow"
+        }
     }
 }
 
diff --git a/src/ConfigParser.cpp b/src/ConfigParser.cpp
index 5d73b55..ee7d69f 100644
--- a/src/ConfigParser.cpp
+++ b/src/ConfigParser.cpp
@@ -749,9 +749,6 @@ void parse_ptree(
             throw runtime_error(ss.str());
         }
 
-        int figType = hexparse(pt_comp.get("figtype", "-1"));
-        int packet_address = hexparse(pt_comp.get("address", "-1"));
-        int packet_datagroup = pt_comp.get("datagroup", false);
         uint8_t component_type = hexparse(pt_comp.get("type", "0"));
 
         auto component = make_shared<DabComponent>(componentuid);
@@ -807,22 +804,67 @@ void parse_ptree(
                 " components are allowed to have labels.";
         }
 
-        if (figType != -1) {
-            if (figType >= (1<<12)) {
-                stringstream ss;
-                ss << "Component with uid " << componentuid <<
-                    ": figtype '" << figType << "' is too large !";
-                throw runtime_error(ss.str());
-            }
+        auto pt_ua = pt_comp.get_child_optional("user-applications");
+        if (pt_ua) {
+            for (const auto& ua_entry : *pt_ua) {
+                const string ua_key = ua_entry.first;
+                const string ua_value = ua_entry.second.data();
+
+                if (ua_key != "userapp") {
+                    etiLog.level(error) << "user-applications should only contain 'userapp' keys";
+                    throw runtime_error("component user-applications definition error");
+                }
+
+                userApplication ua;
+
+                // Values from TS 101 756 Table 16
 
-            if (component->isPacketComponent(ensemble->subchannels)) {
-                component->packet.appType = figType;
+                if (ua_value == "slideshow") {
+                    ua.uaType = FIG0_13_APPTYPE_SLIDESHOW;
 
+                    // This was previously hardcoded in FIG0/13 and means "MOT, start of X-PAD data group"
+                    ua.xpadAppType = 12;
+                }
+                else if (ua_value == "spi") {
+                    ua.uaType = FIG0_13_APPTYPE_SPI;
+                    ua.xpadAppType = 16;
+                }
+
+                component->audio.uaTypes.push_back(ua);
             }
-            else {
-                component->audio.uaType = figType;
+        }
+        else {
+            // Setting only figtype is the old format which allows the definition of a single
+            // user application type only.
+            int figType = hexparse(pt_comp.get("figtype", "-1"));
+            if (figType != -1) {
+
+                etiLog.level(warn) << "The figtype setting is deprecated in favour of user-applications. Please see example configurations.";
+
+                if (figType >= (1<<12)) {
+                    stringstream ss;
+                    ss << "Component with uid " << componentuid <<
+                        ": figtype '" << figType << "' is too large !";
+                    throw runtime_error(ss.str());
+                }
+
+                userApplication ua;
+                ua.uaType = figType;
+
+                // This was previously hardcoded in FIG0/13 and means "MOT, start of X-PAD data group"
+                ua.xpadAppType = 12;
+
+                if (component->isPacketComponent(ensemble->subchannels)) {
+                    component->packet.uaTypes.push_back(ua);
+                }
+                else {
+                    component->audio.uaTypes.push_back(ua);
+                }
             }
+        }
 
+        if (component->isPacketComponent(ensemble->subchannels)) {
+            int packet_address = hexparse(pt_comp.get("address", "-1"));
             if (packet_address != -1) {
                 if (! component->isPacketComponent(ensemble->subchannels)) {
                     stringstream ss;
@@ -833,6 +875,8 @@ void parse_ptree(
 
                 component->packet.address = packet_address;
             }
+
+            int packet_datagroup = pt_comp.get("datagroup", false);
             if (packet_datagroup) {
                 if (! component->isPacketComponent(ensemble->subchannels)) {
                     stringstream ss;
diff --git a/src/DabMultiplexer.cpp b/src/DabMultiplexer.cpp
index 5eca126..ec29211 100644
--- a/src/DabMultiplexer.cpp
+++ b/src/DabMultiplexer.cpp
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2019
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
    */
 /*
@@ -743,17 +743,7 @@ void DabMultiplexer::mux_frame(std::vector<std::shared_ptr<DabOutput> >& outputs
 void DabMultiplexer::print_info()
 {
     // Print settings before starting
-    etiLog.log(info, "--- Multiplex configuration ---");
     printEnsemble(ensemble);
-
-    etiLog.log(info, "--- Subchannels list ---");
-    printSubchannels(ensemble->subchannels);
-
-    etiLog.log(info, "--- Services list ---");
-    printServices(ensemble->services);
-
-    etiLog.log(info, "--- Components list ---");
-    printComponents(ensemble->components);
 }
 
 
diff --git a/src/MuxElements.cpp b/src/MuxElements.cpp
index cb2d545..1d95cc0 100644
--- a/src/MuxElements.cpp
+++ b/src/MuxElements.cpp
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2019
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
 
     http://www.opendigitalradio.org
diff --git a/src/MuxElements.h b/src/MuxElements.h
index 77d417b..100e4d7 100644
--- a/src/MuxElements.h
+++ b/src/MuxElements.h
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2019
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
 
     http://www.opendigitalradio.org
@@ -422,10 +422,20 @@ public:
     struct dabProtection protection;
 };
 
+/* For FIG 0/13 (EN 300 401 Clause 6.3.6) */
+struct userApplication {
+    /* This 11-bit field identifies the user application that shall be used to decode the data in the channel identified
+     * by SId and SCIdS. The interpretation of this field shall be as defined in ETSI TS 101 756 [3], table 16. */
+    uint16_t uaType = 0xFFFF;
 
+    /* X-PAD Application Type: this 5-bit field shall specify the lowest numbered application type used to transport
+     * this user application (see clause 7.4.3).
+     * Also See EN 300 401 Table 11 "X-PAD Application types" */
+    uint8_t xpadAppType;
+};
 
 struct dabAudioComponent {
-    uint16_t uaType = 0xFFFF; // User Application Type
+    std::vector<userApplication> uaTypes;
 };
 
 
@@ -437,7 +447,7 @@ struct dabDataComponent {
 struct dabPacketComponent {
     uint16_t id = 0;
     uint16_t address = 0;
-    uint16_t appType = 0xFFFF;
+    std::vector<userApplication> uaTypes;
     bool datagroup = false;
 };
 
diff --git a/src/fig/FIG0_13.cpp b/src/fig/FIG0_13.cpp
index 314c6e1..582e28e 100644
--- a/src/fig/FIG0_13.cpp
+++ b/src/fig/FIG0_13.cpp
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2016
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
    */
 /*
@@ -92,9 +92,14 @@ FillStatus FIG0_13::fill(uint8_t *buf, size_t max_size)
         const auto type = (*subchannel)->type;
         if (    m_transmit_programme and
                 (type == subchannel_type_t::DABPlusAudio or type == subchannel_type_t::DABAudio) and
-                (*componentFIG0_13)->audio.uaType != 0xffff) {
+                (*componentFIG0_13)->audio.uaTypes.size() != 0) {
 
-            const int required_size = 3+4+11;
+            const size_t num_apps = (*componentFIG0_13)->audio.uaTypes.size();
+
+            const size_t app_length = 2;
+            static_assert(sizeof(FIG0_13_shortAppInfo) == 3);
+            static_assert(sizeof(FIG0_13_app) == 4);
+            const int required_size = sizeof(FIG0_13_shortAppInfo) + num_apps * (sizeof(FIG0_13_app) + app_length);
 
             if (fig0 == NULL) {
                 if (remaining < 2 + required_size) {
@@ -117,34 +122,42 @@ FillStatus FIG0_13::fill(uint8_t *buf, size_t max_size)
             FIG0_13_shortAppInfo* info = (FIG0_13_shortAppInfo*)buf;
             info->SId = htonl((*componentFIG0_13)->serviceId) >> 16;
             info->SCIdS = (*componentFIG0_13)->SCIdS;
-            info->No = 1;
-            buf += 3;
-            remaining -= 3;
-            fig0->Length += 3;
-
-            FIG0_13_app* app = (FIG0_13_app*)buf;
-            app->setType((*componentFIG0_13)->audio.uaType);
-            app->length = 2;
-            app->xpad = htons(0x0c3c);
-            /* xpad meaning
-               CA        = 0
-               CAOrg     = 0
-               Rfu       = 0
-               AppTy(5)  = 12 (MOT, start of X-PAD data group)
-               DG        = 0 (MSC data groups used)
-               Rfu       = 0
-               DSCTy(6)  = 60 (MOT)
-               */
-
-            buf += 2 + app->length;
-            remaining -= 2 + app->length;
-            fig0->Length += 2 + app->length;
+            info->No = num_apps;
+            buf += sizeof(FIG0_13_shortAppInfo);
+            remaining -= sizeof(FIG0_13_shortAppInfo);
+            fig0->Length += sizeof(FIG0_13_shortAppInfo);
+
+            for (const auto& ua : (*componentFIG0_13)->audio.uaTypes) {
+                FIG0_13_app* app = (FIG0_13_app*)buf;
+                app->setType(ua.uaType);
+                app->length = app_length;
+
+                const uint8_t dscty = 60; // TS 101 756 Table 2b (MOT)
+                app->xpad = htons((ua.xpadAppType << 8) | dscty);
+                /* xpad meaning
+                   CA        = 0
+                   CAOrg     = 0 (CAOrg field absent)
+                   Rfu       = 0
+                   AppTy(5)  = depending on config
+                   DG        = 0 (MSC data groups used)
+                   Rfu       = 0
+                   DSCTy(6)  = 60 (MOT)
+                   */
+
+                buf += sizeof(FIG0_13_app);
+                remaining -= sizeof(FIG0_13_app);
+                fig0->Length += sizeof(FIG0_13_app);
+            }
         }
-        else if (!m_transmit_programme &&
-                (*subchannel)->type == subchannel_type_t::Packet &&
-                (*componentFIG0_13)->packet.appType != 0xffff) {
+        else if (not m_transmit_programme and
+                (*subchannel)->type == subchannel_type_t::Packet and
+                (*componentFIG0_13)->packet.uaTypes.size() != 0) {
 
-            const int required_size = 5+2+2;
+            const size_t num_apps = (*componentFIG0_13)->audio.uaTypes.size();
+
+            const size_t app_length = 2;
+            const int required_size = sizeof(FIG0_13_longAppInfo) + num_apps * (sizeof(FIG0_13_app) + app_length);
+            /* is conservative because app_length can be 0 */
 
             if (fig0 == NULL) {
                 if (remaining < 2 + required_size) {
@@ -167,26 +180,36 @@ FillStatus FIG0_13::fill(uint8_t *buf, size_t max_size)
             FIG0_13_longAppInfo* info = (FIG0_13_longAppInfo*)buf;
             info->SId = htonl((*componentFIG0_13)->serviceId);
             info->SCIdS = (*componentFIG0_13)->SCIdS;
-            info->No = 1;
-            buf += 5;
-            remaining -= 5;
-            fig0->Length += 5;
-
-            FIG0_13_app* app = (FIG0_13_app*)buf;
-            app->setType((*componentFIG0_13)->packet.appType);
-            if (app->typeLow == FIG0_13_APPTYPE_EPG) {
-                app->length = 2;
-                app->xpad = htons(0x0100);
-                /* xpad used to hold two bytes of EPG profile information
-                   01 = basic profile
-                   00 = list terminator */
-            }
-            else {
-                app->length = 0;
+            info->No = num_apps;
+            buf += sizeof(FIG0_13_longAppInfo);
+            remaining -= sizeof(FIG0_13_longAppInfo);
+            fig0->Length += sizeof(FIG0_13_longAppInfo);
+
+            for (const auto& ua : (*componentFIG0_13)->audio.uaTypes) {
+                FIG0_13_app* app = (FIG0_13_app*)buf;
+                app->setType(ua.uaType);
+
+                size_t effective_length = sizeof(FIG0_13_app);
+
+                if (ua.uaType == FIG0_13_APPTYPE_SPI) {
+                    // TODO This should probably be user configurable...
+                    app->length = app_length;
+                    app->xpad = htons(0x0100);
+                    /* xpad is actually not the "X-PAD data" as in Figure 25, but is the actual user application data.
+                     * We just recycle the same structure, even though it's a bit ugly.
+                     * It holds two bytes of EPG profile information:
+                     * 01 = basic profile
+                     * 00 = list terminator */
+                }
+                else {
+                    app->length = 0;
+                    effective_length = 1; // FIG0_13_app without xpad
+                }
+
+                buf += effective_length;
+                remaining -= effective_length;
+                fig0->Length += effective_length;
             }
-            buf += 2 + app->length;
-            remaining -= 2 + app->length;
-            fig0->Length += 2 + app->length;
         }
     }
 
diff --git a/src/fig/FIG0_13.h b/src/fig/FIG0_13.h
index bac5b25..18159f0 100644
--- a/src/fig/FIG0_13.h
+++ b/src/fig/FIG0_13.h
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2016
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
    */
 /*
diff --git a/src/fig/FIG0structs.h b/src/fig/FIG0structs.h
index d022dc4..a82e59e 100644
--- a/src/fig/FIG0structs.h
+++ b/src/fig/FIG0structs.h
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2017
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
    */
 /*
@@ -36,7 +36,7 @@
 #define FIG0_13_APPTYPE_TPEG       0x4
 #define FIG0_13_APPTYPE_DGPS       0x5
 #define FIG0_13_APPTYPE_TMC        0x6
-#define FIG0_13_APPTYPE_EPG        0x7
+#define FIG0_13_APPTYPE_SPI        0x7
 #define FIG0_13_APPTYPE_DABJAVA    0x8
 #define FIG0_13_APPTYPE_JOURNALINE 0x441
 
diff --git a/src/utils.cpp b/src/utils.cpp
index 7cd441a..c2916d2 100644
--- a/src/utils.cpp
+++ b/src/utils.cpp
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2019
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
 
     http://www.opendigitalradio.org
@@ -38,6 +38,8 @@ using namespace std;
 static time_t dab_time_seconds = 0;
 static int dab_time_millis = 0;
 
+static void printServices(const vector<shared_ptr<DabService> >& services);
+
 void update_dab_time()
 {
     if (dab_time_seconds == 0) {
@@ -100,7 +102,7 @@ void header_message()
     fprintf(stderr,
             "(Communications Research Centre Canada)\n\n");
     fprintf(stderr,
-            "Copyright (C) 2019 Matthias P. Braendli\n");
+            "Copyright (C) 2020 Matthias P. Braendli\n");
     fprintf(stderr,
             "LICENCE: GPLv3+\n\n");
     fprintf(stderr,
@@ -209,6 +211,7 @@ void printServices(const vector<shared_ptr<DabService> >& services)
 {
     int index = 0;
 
+    etiLog.log(info, "--- Services list ---");
     for (auto service : services) {
 
         etiLog.level(info) << "Service       " << service->get_rc_name();
@@ -239,18 +242,7 @@ void printServices(const vector<shared_ptr<DabService> >& services)
     }
 }
 
-void printComponents(const vec_sp_component& components)
-{
-    unsigned int index = 0;
-
-    for (const auto component : components) {
-        etiLog.level(info) << "Component                " << component->get_rc_name();
-        printComponent(component);
-        ++index;
-    }
-}
-
-void printComponent(const shared_ptr<DabComponent>& component)
+void printComponent(const shared_ptr<DabComponent>& component, const std::shared_ptr<dabEnsemble>& ensemble)
 {
     etiLog.log(info, " service id:             0x%x (%u)",
             component->serviceId, component->serviceId);
@@ -264,55 +256,55 @@ void printComponent(const shared_ptr<DabComponent>& component)
     etiLog.log(info, " service component type: 0x%x (%u)", component->type,
             component->type);
 
-    if (component->packet.appType != 0xFFFF) {
+    if (component->isPacketComponent(ensemble->subchannels)) {
         etiLog.log(info, " (packet) id:            0x%x (%u)",
                 component->packet.id, component->packet.id);
         etiLog.log(info, " (packet) address:       %u",
                 component->packet.address);
-
-        etiLog.log(info, " (packet) app type:      %u",
-                component->packet.appType);
-
         etiLog.log(info, " (packet) datagroup:     %u",
                 component->packet.datagroup);
-    }
-    else if (component->audio.uaType != 0xFFFF) {
-        stringstream ss;
-        ss <<            " (audio) app type:       ";
-        switch (component->audio.uaType) {
-            case FIG0_13_APPTYPE_SLIDESHOW:
-                ss << "MOT Slideshow";
-                break;
-            case FIG0_13_APPTYPE_WEBSITE:
-                ss << "MOT Broadcast Website";
-                break;
-            case FIG0_13_APPTYPE_TPEG:
-                ss << "TPEG";
-                break;
-            case FIG0_13_APPTYPE_DGPS:
-                ss << "DGPS";
-                break;
-            case FIG0_13_APPTYPE_TMC:
-                ss << "TMC";
-                break;
-            case FIG0_13_APPTYPE_EPG:
-                ss << "EPG";
-                break;
-            case FIG0_13_APPTYPE_DABJAVA:
-                ss << "DAB Java";
-                break;
-            case FIG0_13_APPTYPE_JOURNALINE:
-                ss << "Journaline";
-                break;
-            default:
-                ss << "Unknown: " << component->audio.uaType;
-                break;
-        }
 
-        etiLog.level(info) << ss.str();
+        for (const auto& userapp : component->packet.uaTypes) {
+            etiLog.log(info, " (packet) app type:      %u",
+                    userapp.uaType);
+        }
     }
     else {
-        etiLog.level(info) << " No app type defined";
+        for (const auto& userapp : component->audio.uaTypes) {
+            stringstream ss;
+            ss <<            " (audio) app type:       ";
+            switch (userapp.uaType) {
+                case FIG0_13_APPTYPE_SLIDESHOW:
+                    ss << "MOT Slideshow";
+                    break;
+                case FIG0_13_APPTYPE_WEBSITE:
+                    ss << "MOT Broadcast Website";
+                    break;
+                case FIG0_13_APPTYPE_TPEG:
+                    ss << "TPEG";
+                    break;
+                case FIG0_13_APPTYPE_DGPS:
+                    ss << "DGPS";
+                    break;
+                case FIG0_13_APPTYPE_TMC:
+                    ss << "TMC";
+                    break;
+                case FIG0_13_APPTYPE_SPI:
+                    ss << "SPI/EPG";
+                    break;
+                case FIG0_13_APPTYPE_DABJAVA:
+                    ss << "DAB Java";
+                    break;
+                case FIG0_13_APPTYPE_JOURNALINE:
+                    ss << "Journaline";
+                    break;
+                default:
+                    ss << "Unknown: " << userapp.uaType;
+                    break;
+            }
+
+            etiLog.level(info) << ss.str();
+        }
     }
 }
 
@@ -322,6 +314,8 @@ void printSubchannels(const vec_sp_subchannel& subchannels)
 
     int total_num_cu = 0;
 
+    etiLog.log(info, "--- Subchannels list ---");
+
     for (auto subchannel : subchannels) {
         dabProtection* protection = &subchannel->protection;
         etiLog.level(info) << "Subchannel   " << subchannel->uid;
@@ -509,6 +503,7 @@ static void printFrequencyInformation(const shared_ptr<dabEnsemble>& ensemble)
 
 void printEnsemble(const shared_ptr<dabEnsemble>& ensemble)
 {
+    etiLog.log(info, "--- Multiplex configuration ---");
     etiLog.log(info, "Ensemble");
     etiLog.log(info, " id:          0x%lx (%lu)", ensemble->id, ensemble->id);
     etiLog.log(info, " ecc:         0x%x (%u)", ensemble->ecc, ensemble->ecc);
@@ -556,6 +551,15 @@ void printEnsemble(const shared_ptr<dabEnsemble>& ensemble)
 
     printLinking(ensemble);
     printFrequencyInformation(ensemble);
+
+    printSubchannels(ensemble->subchannels);
+    printServices(ensemble->services);
+
+    etiLog.log(info, "--- Components list ---");
+    for (const auto component : ensemble->components) {
+        etiLog.level(info) << "Component                " << component->get_rc_name();
+        printComponent(component, ensemble);
+    }
 }
 
 long hexparse(const std::string& input)
diff --git a/src/utils.h b/src/utils.h
index c9beb8e..cf64c69 100644
--- a/src/utils.h
+++ b/src/utils.h
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2018
+   Copyright (C) 2020
    Matthias P. Braendli, matthias.braendli@mpb.li
 
    This file contains a set of utility functions that are used to show
@@ -68,17 +68,10 @@ void printUsageConfigfile(char *name, FILE* out = stderr);
  * resp. subchannels*/
 void printOutputs(const std::vector<std::shared_ptr<DabOutput> >& outputs);
 
-void printServices(const std::vector<std::shared_ptr<DabService> >& services);
-
-void printComponents(const vec_sp_component& components);
-
-void printSubchannels(const vec_sp_subchannel& subchannels);
-
 /* Print information about the whole ensemble */
 void printEnsemble(const std::shared_ptr<dabEnsemble>& ensemble);
 
-/* Print detailed component information */
-void printComponent(const std::shared_ptr<DabComponent>& component);
+void printSubchannels(const vec_sp_subchannel& subchannels);
 
 long hexparse(const std::string& input);