1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
|
; Sample configuration file for ODR-DabMod
[remotecontrol]
; enable the telnet remote control on localhost:2121
; Since this is totally unsecure telnet, the software
; will only listen on the local loopback interface.
; To get secure remote access, use SSH port forwarding
telnet=1
telnetport=2121
[log]
; Write to a logfile or to syslog.
; Setting filename to stderr is very useful during tests and development
syslog=0
filelog=1
filename=/dev/stderr
[input]
; A file or fifo input is using transport=file
transport=file
source=/dev/stdin
; When recieving data using ZeroMQ, the source is the URI to be used
;transport=zeromq
;source=tcp://localhost:8080
loop=1
[modulator]
; Gain mode: 0=FIX, 1=MAX, 2=VAR
gainmode=2
; Transmission mode
; If not defined, take the mode from ETI
;mode=2
; Set to 0 to disable CicEqualiser
dac_clk_rate=0
digital_gain=1.0
; Output sample rate
rate=2048000
[firfilter]
enabled=0
filtertapsfile=simple_taps.txt
[output]
; choose output: possible values: uhd, file
output=uhd
[fileoutput]
filename=/dev/stdout
[uhdoutput]
; For a USRP B100:
device=master_clock_rate=32768000,type=b100
txgain=2
; Try with small gain values
; For the B200
;device=master_clock_rate=20480000,type=b200
;txgain=40
; The B200 needs larger gains (up to 89dB) but,
; "Gain settings are application specific, but it is recommended that users
; consider using at least half of the available gain to get reasonable dynamic
; range."
; From the B200 User Manual
; http://files.ettus.com/uhd_docs/manual/html/usrp_b200.html
; TODO: measure the RF quality with different values of master_clock_rate:
; 10240000
; 20480000
; 30720000
; 32768000
; and other values
; For the USRP1
;device=type=usrp1
; you must change the rate in [modulator] ! The USRP1 does not have flexible
; clocking
;rate=3200000
; you must specify either frequency or channel
;frequency=234208000
channel=13C
; possible values : internal, external, MIMO
refclk_source=internal
; possible values : none, external, MIMO
pps_source=none
; behaviour when external clock reference lock lost
; possible values: ignore, crash
behaviour_refclk_lock_lost=ignore
; Used for SFN with the UHD output
[delaymanagement]
synchronous=0
; whether to mute the TX when incoming frames have no timestamp
mutenotimestamps=0
; choose between fixed and dynamic offset definition
management=dynamic
fixedoffset=0.002
dynamicoffsetfile=modulator_offset
|
