blob: 8b622c7b8dc4f38715fba2855dac2d42d9f286b2 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
|
OVERVIEW
========
ODR-DabMod is a *DAB (Digital Audio Broadcasting)* modulator compliant
to ETSI EN 300 401. It is the continuation of the work started by which was
developed by the Communications Research Center Canada on CRC-DabMod, and
is now pursued in the
[Opendigitalradio project](http://opendigitalradio.org).
ODR-DabMod is part of the ODR-mmbTools tool set. More information about the
ODR-mmbTools is available in the *guide*, available on the
[Opendigitalradio mmbTools page](http://www.opendigitalradio.org/mmbtools).
Short list of features:
- Reads ETI and EDI, outputs compliant COFDM I/Q
- Supports native DAB sample rate and can also resample to other rates
- Supports all four DAB transmission modes
- Configuration file support, see doc/example.ini
- Integrated UHD output for [USRP devices](https://www.ettus.com/product)
- Tested for B200, B100, USRP2, USRP1
- With WBX daughterboard (where appropriate)
- [SoapySDR](https://github.com/pothosware/SoapySDR/wiki) output
- Can be used to drive the [LimeSDR board](https://myriadrf.org/projects/limesdr/), the [HackRF](https://greatscottgadgets.com/hackrf/) and others.
- Timestamping support required for SFN
- GPSDO monitoring (both Ettus and [ODR LEA-M8F board](http://www.opendigitalradio.org/lea-m8f-gpsdo))
- A FIR filter for improved spectrum mask
- TII insertion
- Logging: log to file, to syslog
- ETI sources: ETI-over-TCP, file (Raw, Framed and Streamed) and ZeroMQ
- A Telnet and ZeroMQ remote-control that can be used to change
some parameters during runtime
- ZeroMQ PUB and REP output.
- Ongoing work about digital predistortion for PA linearisation.
See dpd/README.md
- A prototype algorithm for crest factor reduction.
The src/ directory contains the source code of ODR-DabMod.
The doc/ directory contains the ODR-DabMod documentation, and an example
configuration file.
The lib/ directory contains source code of libraries needed to build
ODR-DabMod.
The dpd/ directory contains the digital predistortion project. It's goal is to reduce distortion that is caused by the non-linearity of the PA.
INSTALL
=======
See the INSTALL file for installation instructions.
LICENCE
=======
See the files LICENCE and COPYING
CONTACT
=======
Matthias P. Braendli *matthias [at] mpb [dot] li*
Pascal Charest *pascal [dot] charest [at] crc [dot] ca*
With thanks to other contributors listed in AUTHORS
http://opendigitalradio.org/
|
