From 2e719a17158b6262b6824f568ddf8f96a348836a Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Fri, 7 Mar 2014 20:59:45 +0100 Subject: update example config with B200 information --- doc/example.ini | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'doc') diff --git a/doc/example.ini b/doc/example.ini index 31c28fa..7f4e315 100644 --- a/doc/example.ini +++ b/doc/example.ini @@ -53,11 +53,37 @@ output=uhd filename=/dev/stdout [uhdoutput] +; For a USRP B100: device=master_clock_rate=32768000,type=b100 +txgain=2 +; Try with small gain values + +; For the B200 +;device=master_clock_rate=20480000,type=b200 +;txgain=40 +; The B200 needs larger gains (up to 89dB) but, +; "Gain settings are application specific, but it is recommended that users +; consider using at least half of the available gain to get reasonable dynamic +; range." +; From the B200 User Manual +; http://files.ettus.com/uhd_docs/manual/html/usrp_b200.html + +; TODO: measure the RF quality with different values of master_clock_rate: +; 10240000 +; 20480000 +; 30720000 +; 32768000 +; and other values + +; For the USRP1 +;device=type=usrp1 +; you must change the rate in [modulator] ! The USRP1 does not have flexible +; clocking +;rate=3200000 + ; you must specify either frequency or channel ;frequency=234208000 channel=13C -txgain=0 ; possible values : internal, external, MIMO refclk_source=internal -- cgit v1.2.3