diff options
Diffstat (limited to 'dpd')
| -rw-r--r-- | dpd/README.md | 23 | ||||
| -rw-r--r-- | dpd/dpd.ini | 2 | ||||
| -rw-r--r-- | dpd/lut.coef | 64 | ||||
| -rwxr-xr-x | dpd/main.py | 69 | ||||
| -rw-r--r-- | dpd/poly.coef | 21 | ||||
| -rw-r--r-- | dpd/src/Adapt.py | 90 | ||||
| -rw-r--r-- | dpd/src/Model.py | 358 | ||||
| -rw-r--r-- | dpd/src/Model_Poly.py | 21 |
8 files changed, 212 insertions, 436 deletions
diff --git a/dpd/README.md b/dpd/README.md index b5a6b81..83a2986 100644 --- a/dpd/README.md +++ b/dpd/README.md @@ -8,7 +8,9 @@ Concept ODR-DabMod makes outgoing TX samples and feedback RX samples available for an external tool. This external tool can request a buffer of samples for analysis, can calculate coefficients for the -polynomial predistorter in ODR-DabMod and load the new coefficients using the remote control. +predistorter in ODR-DabMod and load the new coefficients using the remote control. + +The predistorter in ODR-DabMod supports two modes: polynomial and lookup table. The *dpd/main.py* script is the entry point for the *DPD Calculation Engine* into which these features will be implemented. The tool uses modules from the *dpd/src/* folder: @@ -43,10 +45,21 @@ The coef file contains the polynomial coefficients used in the predistorter. The very similar to the filtertaps file used in the FIR filter. It is a text-based format that can easily be inspected and edited in a text editor. -The first line contains the number of coefficients as an integer. The second and third lines contain -the real, respectively the imaginary parts of the first coefficient. Fourth and fifth lines give the -second coefficient, and so on. The file therefore contains 2xN + 1 lines if it contains N -coefficients. +The first line contains an integer that defines the predistorter to be used: +1 for polynomial, 2 for lookup table. + +For the polynomial, the subsequent line contains the number of coefficients +as an integer. The second and third lines contain the real, respectively the +imaginary parts of the first coefficient. Fourth and fifth lines give the +second coefficient, and so on. The file therefore contains 1 + 1 + 2xN lines if +it contains N coefficients. + +For the lookup table, the subsequent line contains a float scalefactor that is +applied to the samples in order to bring them into the range of 32-bit unsigned +integer. Then, the next pair of lines contains real and imaginary part of the first +lookup-table entry, which is multiplied to samples in first range. Then it's +followed by 31 other pairs. The entries are complex values close to 1 + 0j. +The file therefore contains 1 + 1 + 2xN lines if it contains N coefficients. TODO ---- diff --git a/dpd/dpd.ini b/dpd/dpd.ini index 1bc51de..26a53c5 100644 --- a/dpd/dpd.ini +++ b/dpd/dpd.ini @@ -40,7 +40,7 @@ filename=dpd.iq device= master_clock_rate=32768000 type=b200 -txgain=15 +txgain=55 channel=13C refclk_source=internal pps_source=none diff --git a/dpd/lut.coef b/dpd/lut.coef new file mode 100644 index 0000000..a198d56 --- /dev/null +++ b/dpd/lut.coef @@ -0,0 +1,64 @@ +2 +4294967296 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 +1 +0 diff --git a/dpd/main.py b/dpd/main.py index 208a4ff..084ccd5 100755 --- a/dpd/main.py +++ b/dpd/main.py @@ -13,7 +13,7 @@ predistortion module of ODR-DabMod.""" import datetime import os import time - +import sys import matplotlib matplotlib.use('GTKAgg') @@ -43,7 +43,6 @@ import traceback import src.Measure as Measure import src.Model as Model import src.ExtractStatistic as ExtractStatistic -import src.Model_Poly import src.Adapt as Adapt import src.Agc as Agc import src.TX_Agc as TX_Agc @@ -84,8 +83,8 @@ parser.add_argument('--samps', default='81920', type=int, parser.add_argument('-i', '--iterations', default=1, type=int, help='Number of iterations to run', required=False) -parser.add_argument('-l', '--load-poly', - help='Load existing polynomial', +parser.add_argument('-L', '--lut', + help='Use lookup table instead of polynomial predistorter', action="store_true") cli_args = parser.parse_args() @@ -107,13 +106,13 @@ c = src.const.const(samplerate) meas = Measure.Measure(samplerate, port, num_req) extStat = ExtractStatistic.ExtractStatistic(c, plot=True) adapt = Adapt.Adapt(port_rc, coef_path) +dpddata = adapt.get_predistorter() -coefs_am, coefs_pm = adapt.get_coefs() -model_poly = src.Model_Poly.Model_Poly(c, coefs_am, coefs_pm, plot=True) -if not cli_args.load_poly: - coefs_am, coefs_pm = model_poly.get_default_coefs() - -adapt.set_coefs(model_poly.coefs_am, model_poly.coefs_pm) +if cli_args.lut: + model = Model.Lut(c, plot=True) +else: + model = Model.Poly(c, plot=True) +adapt.set_predistorter(model.get_dpd_data()) adapt.set_digital_gain(digital_gain) adapt.set_txgain(txgain) adapt.set_rxgain(rxgain) @@ -121,13 +120,28 @@ adapt.set_rxgain(rxgain) tx_gain = adapt.get_txgain() rx_gain = adapt.get_rxgain() digital_gain = adapt.get_digital_gain() -dpd_coefs_am, dpd_coefs_pm = adapt.get_coefs() -logging.info( - "TX gain {}, RX gain {}, dpd_coefs_am {}," - " dpd_coefs_pm {}, digital_gain {}".format( - tx_gain, rx_gain, dpd_coefs_am, dpd_coefs_pm, digital_gain + +dpddata = adapt.get_predistorter() +if dpddata[0] == "poly": + coefs_am = dpddata[1] + coefs_pm = dpddata[2] + logging.info( + "TX gain {}, RX gain {}, dpd_coefs_am {}," + " dpd_coefs_pm {}, digital_gain {}".format( + tx_gain, rx_gain, coefs_am, coefs_pm, digital_gain + ) ) -) +elif dpddata[0] == "lut": + scalefactor = dpddata[1] + lut = dpddata[2] + logging.info( + "TX gain {}, RX gain {}, LUT scalefactor {}," + " LUT {}, digital_gain {}".format( + tx_gain, rx_gain, scalefactor, lut, digital_gain + ) + ) +else: + logging.error("Unknown dpd data format {}".format(dpddata[0])) tx_agc = TX_Agc.TX_Agc(adapt) @@ -154,14 +168,14 @@ while i < num_iter: # Model elif state == "model": - coefs_am, coefs_pm = model_poly.get_next_coefs(tx, rx, phase_diff) + dpddata = model_poly.get_dpd_data(tx, rx, phase_diff) del extStat extStat = ExtractStatistic.ExtractStatistic(c, plot=True) state = "adapt" # Adapt elif state == "adapt": - adapt.set_coefs(coefs_am, coefs_pm) + adapt.set_predistorter(dpddata) state = "report" i += 1 @@ -172,9 +186,19 @@ while i < num_iter: tx_mer = MER.calc_mer(txframe_aligned[off:off+c.T_U], debug=True) rx_mer = MER.calc_mer(rxframe_aligned[off:off+c.T_U], debug=True) mse = np.mean(np.abs((txframe_aligned - rxframe_aligned)**2)) - logging.info("It {}: TX_MER {}, RX_MER {}," \ - " MSE {}, coefs_am {}, coefs_pm {}". - format(i, tx_mer, rx_mer, mse, coefs_am, coefs_pm)) + + if dpddata[0] == "poly": + coefs_am = dpddata[1] + coefs_pm = dpddata[2] + logging.info("It {}: TX_MER {}, RX_MER {}," \ + " MSE {}, coefs_am {}, coefs_pm {}". + format(i, tx_mer, rx_mer, mse, coefs_am, coefs_pm)) + if dpddata[0] == "lut": + scalefactor = dpddata[1] + lut = dpddata[2] + logging.info("It {}: TX_MER {}, RX_MER {}," \ + " MSE {}, LUT scalefactor {}, LUT {}". + format(i, tx_mer, rx_mer, mse, scalefactor, lut)) state = "measure" except: logging.warning("Iteration {}: Report failed.".format(i)) @@ -187,7 +211,8 @@ while i < num_iter: # The MIT License (MIT) # -# Copyright (c) 2017 Andreas Steger, Matthias P. Braendli +# Copyright (c) 2017 Andreas Steger +# Copyright (c) 2017 Matthias P. Braendli # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal diff --git a/dpd/poly.coef b/dpd/poly.coef index f65e369..248d316 100644 --- a/dpd/poly.coef +++ b/dpd/poly.coef @@ -1,11 +1,12 @@ -5 1 -0 -0 -0 -0 -0 -0 -0 -0 -0 +5 +1.0 +0.0 +0.0 +0.0 +0.0 +0.0 +0.0 +0.0 +0.0 +0.0 diff --git a/dpd/src/Adapt.py b/dpd/src/Adapt.py index 8f33b70..f21bb87 100644 --- a/dpd/src/Adapt.py +++ b/dpd/src/Adapt.py @@ -13,6 +13,10 @@ import zmq import logging import numpy as np +LUT_LEN=32 +FORMAT_POLY=1 +FORMAT_LUT=2 + class Adapt: """Uses the ZMQ remote control to change parameters of the DabMod @@ -126,46 +130,74 @@ class Adapt: # TODO handle failure return float(self.send_receive("get gain digital")[0]) - def _read_coef_file(self, path): + def get_predistorter(self): """Load the coefficients from the file in the format given in the README, - return ([AM coef], [PM coef])""" - coefs_am_out = [] - coefs_pm_out = [] - f = open(path, 'r') + return ("poly", [AM coef], [PM coef]) or ("lut", scalefactor, [LUT entries])""" + f = open(self.coef_path, 'r') lines = f.readlines() - n_coefs = int(lines[0]) - coefs = [float(l) for l in lines[1:]] - i = 0 - for c in coefs: - if i < n_coefs: - coefs_am_out.append(c) - elif i < 2*n_coefs: - coefs_pm_out.append(c) - else: - raise ValueError( - "Incorrect coef file format: too many coefficients in {}, should be {}, coefs are {}" - .format(path, n_coefs, coefs)) - i += 1 - f.close() - return (np.array(coefs_am_out, dtype=np.float32), - np.array(coefs_pm_out, dtype=np.float32)) - - def get_coefs(self): - return self._read_coef_file(self.coef_path) - - def _write_coef_file(self, coefs_am, coefs_pm, path): + predistorter_format = int(lines[0]) + if predistorter_format == FORMAT_POLY: + coefs_am_out = [] + coefs_pm_out = [] + n_coefs = int(lines[1]) + coefs = [float(l) for l in lines[2:]] + i = 0 + for c in coefs: + if i < n_coefs: + coefs_am_out.append(c) + elif i < 2*n_coefs: + coefs_pm_out.append(c) + else: + raise ValueError( + "Incorrect coef file format: too many coefficients in {}, should be {}, coefs are {}" + .format(path, n_coefs, coefs)) + i += 1 + f.close() + return ("poly", coefs_am_out, coefs_pm_out) + elif predistorter_format == FORMAT_LUT: + scalefactor = int(lines[1]) + coefs = np.array([float(l) for l in lines[2:]], dtype=np.float32) + coefs = coefs.reshape((-1, 2)) + lut = coefs[..., 0] + 1j * coefs[..., 1] + if len(lut) != LUT_LEN: + raise ValueError("Incorrect number of LUT entries ({} expected {})".format(len(lut), LUT_LEN)) + return ("lut", scalefactor, lut) + else: + raise ValueError("Unknown predistorter format {}".format(predistorter_format)) + + def _write_poly_coef_file(self, coefs_am, coefs_pm, path): assert(len(coefs_am) == len(coefs_pm)) f = open(path, 'w') - f.write("{}\n".format(len(coefs_am))) + f.write("{}\n{}\n".format(FORMAT_POLY, len(coefs_am))) for coef in coefs_am: f.write("{}\n".format(coef)) for coef in coefs_pm: f.write("{}\n".format(coef)) f.close() - def set_coefs(self, coefs_am, coefs_pm): - self._write_coef_file(coefs_am, coefs_pm, self.coef_path) + def _write_lut_file(self, scalefactor, lut, path): + assert(len(lut) == LUT_LEN) + + f = open(path, 'w') + f.write("{}\n{}\n".format(FORMAT_LUT, scalefactor)) + for coef in lut: + f.write("{}\n{}\n".format(coef.real, coef.imag)) + f.close() + + def set_predistorter(self, dpddata): + """Update the predistorter data in the modulator. Takes the same + tuple format as argument than the one returned get_predistorter()""" + if dpddata[0] == "poly": + coefs_am = dpddata[1] + coefs_pm = dpddata[2] + self._write_poly_coef_file(coefs_am, coefs_pm, self.coef_path) + elif dpddata[0] == "lut": + scalefactor = dpddata[1] + lut = dpddata[2] + self._write_lut_file(scalefactor, lut, self.coef_path) + else: + raise ValueError("Unknown predistorter '{}'".format(dpddata[0])) self.send_receive("set memlesspoly coeffile {}".format(self.coef_path)) # The MIT License (MIT) diff --git a/dpd/src/Model.py b/dpd/src/Model.py index fe9c56b..7ce6171 100644 --- a/dpd/src/Model.py +++ b/dpd/src/Model.py @@ -1,357 +1,3 @@ # -*- coding: utf-8 -*- -# -# DPD Calculation Engine, model implementation. -# -# http://www.opendigitalradio.org -# Licence: The MIT License, see notice at the end of this file - -import datetime -import os -import logging - -logging_path = os.path.dirname(logging.getLoggerClass().root.handlers[0].baseFilename) - -import numpy as np -import matplotlib.pyplot as plt -from sklearn import linear_model - - -class Model: - """Calculates new coefficients using the measurement and the previous - coefficients""" - - def __init__(self, - c, - SA, - MER, - coefs_am, - coefs_pm, - learning_rate_am=0.1, - learning_rate_pm=0.1, - plot=False): - self.c = c - self.SA = SA - self.MER = MER - - self.learning_rate_am = learning_rate_am - self.learning_rate_pm = learning_rate_pm - - self.coefs_am = coefs_am - self.coefs_am_history = [coefs_am, ] - self.mses_am = [] - self.errs_am = [] - - self.tx_mers = [] - self.rx_mers = [] - - self.coefs_pm = coefs_pm - self.coefs_pm_history = [coefs_pm, ] - self.errs_pm = [] - - self.plot = plot - - def sample_uniformly(self, tx_dpd, rx_received, n_bins=5): - """This function returns tx and rx samples in a way - that the tx amplitudes have an approximate uniform - distribution with respect to the tx_dpd amplitudes""" - mask = np.logical_and((np.abs(tx_dpd) > 0.01), (np.abs(rx_received) > 0.01)) - tx_dpd = tx_dpd[mask] - rx_received = rx_received[mask] - - txframe_aligned_abs = np.abs(tx_dpd) - ccdf_min = 0 - ccdf_max = np.max(txframe_aligned_abs) - tx_hist, ccdf_edges = np.histogram(txframe_aligned_abs, - bins=n_bins, - range=(ccdf_min, ccdf_max)) - n_choise = np.min(tx_hist) - tx_choice = np.zeros(n_choise * n_bins, dtype=np.complex64) - rx_choice = np.zeros(n_choise * n_bins, dtype=np.complex64) - - for idx, bin in enumerate(tx_hist): - indices = np.where((txframe_aligned_abs >= ccdf_edges[idx]) & - (txframe_aligned_abs <= ccdf_edges[idx + 1]))[0] - indices_choise = np.random.choice(indices, - n_choise, - replace=False) - rx_choice[idx * n_choise:(idx + 1) * n_choise] = \ - rx_received[indices_choise] - tx_choice[idx * n_choise:(idx + 1) * n_choise] = \ - tx_dpd[indices_choise] - - assert isinstance(rx_choice[0], np.complex64), \ - "rx_choice is not complex64 but {}".format(rx_choice[0].dtype) - assert isinstance(tx_choice[0], np.complex64), \ - "tx_choice is not complex64 but {}".format(tx_choice[0].dtype) - - return tx_choice, rx_choice - - def dpd_amplitude(self, sig, coefs=None): - if coefs is None: - coefs = self.coefs_am - assert isinstance(sig[0], np.complex64), "Sig is not complex64 but {}".format(sig[0].dtype) - sig_abs = np.abs(sig) - A_sig = np.vstack([np.ones(sig_abs.shape), - sig_abs ** 1, - sig_abs ** 2, - sig_abs ** 3, - sig_abs ** 4, - ]).T - sig_dpd = sig * np.sum(A_sig * coefs, axis=1) - return sig_dpd, A_sig - - def dpd_phase(self, sig, coefs=None): - if coefs is None: - coefs = self.coefs_pm - assert isinstance(sig[0], np.complex64), "Sig is not complex64 but {}".format(sig[0].dtype) - sig_abs = np.abs(sig) - A_phase = np.vstack([np.ones(sig_abs.shape), - sig_abs ** 1, - sig_abs ** 2, - sig_abs ** 3, - sig_abs ** 4, - ]).T - phase_diff_est = np.sum(A_phase * coefs, axis=1) - return phase_diff_est, A_phase - - def _next_am_coefficent(self, tx_choice, rx_choice): - """Calculate new coefficients for AM/AM correction""" - rx_dpd, rx_A = self.dpd_amplitude(rx_choice) - rx_dpd = rx_dpd * ( - np.median(np.abs(tx_choice)) / - np.median(np.abs(rx_dpd))) - err = np.abs(rx_dpd) - np.abs(tx_choice) - mse = np.mean(np.abs((rx_dpd - tx_choice) ** 2)) - self.mses_am.append(mse) - self.errs_am.append(np.mean(err ** 2)) - - a_delta = np.linalg.lstsq(rx_A, err)[0] - new_coefs_am = self.coefs_am - self.learning_rate_am * a_delta - new_coefs_am = new_coefs_am * (self.coefs_am[0] / new_coefs_am[0]) - return new_coefs_am - - def _next_pm_coefficent(self, tx_choice, rx_choice): - """Calculate new coefficients for AM/PM correction - Assuming deviations smaller than pi/2""" - phase_diff_choice = np.angle( - (rx_choice * tx_choice.conjugate()) / - (np.abs(rx_choice) * np.abs(tx_choice)) - ) - plt.hist(phase_diff_choice) - plt.savefig('/tmp/hist_' + str(np.random.randint(0, 1000)) + '.svg') - plt.close() - phase_diff_est, phase_A = self.dpd_phase(rx_choice) - err_phase = phase_diff_est - phase_diff_choice - self.errs_pm.append(np.mean(np.abs(err_phase ** 2))) - - p_delta = np.linalg.lstsq(phase_A, err_phase)[0] - new_coefs_pm = self.coefs_pm - self.learning_rate_pm * p_delta - - return new_coefs_pm, phase_diff_choice - - def get_next_coefs(self, tx_dpd, rx_received): - # Check data type - assert tx_dpd[0].dtype == np.complex64, \ - "tx_dpd is not complex64 but {}".format(tx_dpd[0].dtype) - assert rx_received[0].dtype == np.complex64, \ - "rx_received is not complex64 but {}".format(rx_received[0].dtype) - # Check if signals have same normalization - normalization_error = np.abs(np.median(np.abs(tx_dpd)) - - np.median(np.abs(rx_received))) / ( - np.median(np.abs(tx_dpd)) + np.median(np.abs(rx_received))) - assert normalization_error < 0.01, "Non normalized signals" - - if logging.getLogger().getEffectiveLevel() == logging.DEBUG: - dt = datetime.datetime.now().isoformat() - tx_dpd.tofile(logging_path + "/tx_dpd_" + dt + ".iq") - rx_received.tofile(logging_path + "/rx_received_" + dt + ".iq") - - tx_choice, rx_choice = self.sample_uniformly(tx_dpd, rx_received) - new_coefs_am = self._next_am_coefficent(tx_choice, rx_choice) - new_coefs_pm, phase_diff_choice = self._next_pm_coefficent(tx_choice, rx_choice) - - logging.debug('txframe: min {:.2f}, max {:.2f}, ' \ - 'median {:.2f}; rxframe: min {:.2f}, max {:.2f}, ' \ - 'median {:.2f}; new coefs_am {};' \ - 'new_coefs_pm {}'.format( - np.min(np.abs(tx_dpd)), - np.max(np.abs(tx_dpd)), - np.median(np.abs(tx_dpd)), - np.min(np.abs(rx_choice)), - np.max(np.abs(rx_choice)), - np.median(np.abs(rx_choice)), - new_coefs_am, - new_coefs_pm)) - - if logging.getLogger().getEffectiveLevel() == logging.DEBUG and self.plot: - off = self.SA.calc_offset(tx_dpd) - tx_mer = self.MER.calc_mer(tx_dpd[off:off + self.c.T_U]) - rx_mer = self.MER.calc_mer(rx_received[off:off + self.c.T_U], debug=True) - self.tx_mers.append(tx_mer) - self.rx_mers.append(rx_mer) - - if logging.getLogger().getEffectiveLevel() == logging.DEBUG and self.plot: - dt = datetime.datetime.now().isoformat() - fig_path = logging_path + "/" + dt + "_Model.svg" - - fig = plt.figure(figsize=(2 * 6, 2 * 6)) - - i_sub = 1 - - ax = plt.subplot(4, 2, i_sub) - i_sub += 1 - ax.plot(np.abs(tx_dpd[:128]), - label="TX sent", - linestyle=":") - ax.plot(np.abs(rx_received[:128]), - label="RX received", - color="red") - ax.set_title("Synchronized Signals of Iteration {}" - .format(len(self.coefs_am_history))) - ax.set_xlabel("Samples") - ax.set_ylabel("Amplitude") - ax.text(0, 0, "TX (max {:01.3f}, mean {:01.3f}, " \ - "median {:01.3f})".format( - np.max(np.abs(tx_dpd)), - np.mean(np.abs(tx_dpd)), - np.median(np.abs(tx_dpd)) - ), size=8) - ax.legend(loc=4) - - ax = plt.subplot(4, 2, i_sub) - i_sub += 1 - ccdf_min, ccdf_max = 0, 1 - tx_hist, ccdf_edges = np.histogram(np.abs(tx_dpd), - bins=60, - range=(ccdf_min, ccdf_max)) - tx_hist_normalized = tx_hist.astype(float) / np.sum(tx_hist) - ccdf = 1.0 - np.cumsum(tx_hist_normalized) - ax.semilogy(ccdf_edges[:-1], ccdf, label="CCDF") - ax.semilogy(ccdf_edges[:-1], - tx_hist_normalized, - label="Histogram", - drawstyle='steps') - ax.legend(loc=4) - ax.set_ylim(1e-5, 2) - ax.set_title("Complementary Cumulative Distribution Function") - ax.set_xlabel("TX Amplitude") - ax.set_ylabel("Ratio of Samples larger than x") - - ax = plt.subplot(4, 2, i_sub) - i_sub += 1 - ax.semilogy(np.array(self.mses_am) + 1e-10, label="log(MSE)") - ax.semilogy(np.array(self.errs_am) + 1e-10, label="log(ERR)") - ax.legend(loc=4) - ax.set_title("MSE History") - ax.set_xlabel("Iterations") - ax.set_ylabel("MSE") - - ax = plt.subplot(4, 2, i_sub) - i_sub += 1 - ax.plot(self.tx_mers, label="TX MER") - ax.plot(self.rx_mers, label="RX MER") - ax.legend(loc=4) - ax.set_title("MER History") - ax.set_xlabel("Iterations") - ax.set_ylabel("MER") - - ax = plt.subplot(4, 2, i_sub) - rx_range = np.linspace(0, 1, num=100, dtype=np.complex64) - rx_range_dpd = self.dpd_amplitude(rx_range)[0] - rx_range_dpd_new = self.dpd_amplitude(rx_range, new_coefs_am)[0] - i_sub += 1 - ax.scatter( - np.abs(tx_choice), - np.abs(rx_choice), - s=0.1) - ax.plot(rx_range_dpd / self.coefs_am[0], rx_range, linewidth=0.25, label="current") - ax.plot(rx_range_dpd_new / self.coefs_am[0], rx_range, linewidth=0.25, label="next") - ax.set_ylim(0, 1) - ax.set_xlim(0, 1) - ax.legend() - ax.set_title("Amplifier Characteristic") - ax.set_xlabel("TX Amplitude") - ax.set_ylabel("RX Amplitude") - - ax = plt.subplot(4, 2, i_sub) - i_sub += 1 - coefs_am_history = np.array(self.coefs_am_history) - for idx, coef_hist in enumerate(coefs_am_history.T): - ax.plot(coef_hist, - label="Coef {}".format(idx), - linewidth=0.5) - ax.legend(loc=4) - ax.set_title("AM/AM Coefficient History") - ax.set_xlabel("Iterations") - ax.set_ylabel("Coefficient Value") - - phase_range = np.linspace(0, 1, num=100, dtype=np.complex64) - phase_range_dpd = self.dpd_phase(phase_range)[0] - phase_range_dpd_new = self.dpd_phase(phase_range, - coefs=new_coefs_pm)[0] - ax = plt.subplot(4, 2, i_sub) - i_sub += 1 - ax.scatter( - np.abs(tx_choice), - np.rad2deg(phase_diff_choice), - s=0.1) - ax.plot( - np.abs(phase_range), - np.rad2deg(phase_range_dpd), - linewidth=0.25, - label="current") - ax.plot( - np.abs(phase_range), - np.rad2deg(phase_range_dpd_new), - linewidth=0.25, - label="next") - ax.set_ylim(-180, 180) - ax.set_xlim(0, 1) - ax.legend() - ax.set_title("Amplifier Characteristic") - ax.set_xlabel("TX Amplitude") - ax.set_ylabel("Phase Difference") - - ax = plt.subplot(4, 2, i_sub) - i_sub += 1 - coefs_pm_history = np.array(self.coefs_pm_history) - for idx, coef_phase_hist in enumerate(coefs_pm_history.T): - ax.plot(coef_phase_hist, - label="Coef {}".format(idx), - linewidth=0.5) - ax.legend(loc=4) - ax.set_title("AM/PM Coefficient History") - ax.set_xlabel("Iterations") - ax.set_ylabel("Coefficient Value") - - fig.tight_layout() - fig.savefig(fig_path) - plt.close(fig) - - self.coefs_am = new_coefs_am - self.coefs_am_history.append(self.coefs_am) - self.coefs_pm = new_coefs_pm - self.coefs_pm_history.append(self.coefs_pm) - return self.coefs_am, self.coefs_pm - -# The MIT License (MIT) -# -# Copyright (c) 2017 Andreas Steger -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in all -# copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -# SOFTWARE. +from src.Model_Poly import Poly +from src.Model_Lut import Lut diff --git a/dpd/src/Model_Poly.py b/dpd/src/Model_Poly.py index 1faff24..f6c024c 100644 --- a/dpd/src/Model_Poly.py +++ b/dpd/src/Model_Poly.py @@ -37,40 +37,34 @@ def _check_input_get_next_coefs(tx_abs, rx_abs, phase_diff): tx_abs.shape, phase_diff.shape) -class Model_Poly: +class Poly: """Calculates new coefficients using the measurement and the previous coefficients""" def __init__(self, c, - coefs_am, - coefs_pm, learning_rate_am=1.0, learning_rate_pm=1.0, plot=False): - assert_np_float32(coefs_am) - assert_np_float32(coefs_pm) - self.c = c self.learning_rate_am = learning_rate_am self.learning_rate_pm = learning_rate_pm - self.coefs_am = coefs_am - self.coefs_pm = coefs_pm + self.reset_coefs() self.model_am = Model_AM.Model_AM(c, plot=True) self.model_pm = Model_PM.Model_PM(c, plot=True) self.plot = plot - def get_default_coefs(self): - self.coefs_am[:] = 0 + def reset_coefs(self): + self.coefs_am = np.zeros(5, dtype=np.float32) self.coefs_am[0] = 1 - self.coefs_pm[:] = 0 + self.coefs_pm = np.zeros(5, dtype=np.float32) return self.coefs_am, self.coefs_pm - def get_next_coefs(self, tx_abs, rx_abs, phase_diff): + def train(self, tx_abs, rx_abs, phase_diff): _check_input_get_next_coefs(tx_abs, rx_abs, phase_diff) coefs_am_new = self.model_am.get_next_coefs(tx_abs, rx_abs, self.coefs_am) @@ -79,7 +73,8 @@ class Model_Poly: self.coefs_am = self.coefs_am + (coefs_am_new - self.coefs_am) * self.learning_rate_am self.coefs_pm = self.coefs_pm + (coefs_pm_new - self.coefs_pm) * self.learning_rate_pm - return self.coefs_am, self.coefs_pm + def get_dpd_data(self): + return "poly", self.coefs_am, self.coefs_pm # The MIT License (MIT) # |