diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/example.ini | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/doc/example.ini b/doc/example.ini index d7a261b..da9ac08 100644 --- a/doc/example.ini +++ b/doc/example.ini @@ -164,7 +164,7 @@ enabled=0 polycoeffile=polyCoefs [output] -; choose output: possible values: uhd, file, zmq, soapysdr +; choose output: possible values: uhd, file, zmq, soapysdr, limesdr output=uhd [fileoutput] @@ -322,6 +322,23 @@ channel=13C ; Set to 0 to disable ;dpd_port=50055 +[limeoutput] +; Lime output directly runs against the LMS device driver. It does not support SFN nor predistortion. +device= +;master_clock_rate= + +; txgain range: 0 .. 100 +txgain=20 +tx_antenna=BAND1 +;lo_offset=2048000 +;frequency=234208000 +channel=13C + +; The LimeSDR contains a FIR filter in FPGA that can be used to filter the IQ signal. +; This is useful because it allows us to upsample in a very cheap way in software instead +; of using the FFT-based resampler. +upsample=1 + ; Used for running single-frequency networks [delaymanagement] ; Enable handling of timestamps for SFN |