summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/DabMod.cpp220
1 files changed, 109 insertions, 111 deletions
diff --git a/src/DabMod.cpp b/src/DabMod.cpp
index 436ce9a..63a1e98 100644
--- a/src/DabMod.cpp
+++ b/src/DabMod.cpp
@@ -479,143 +479,141 @@ static run_modulator_state_t run_modulator(modulator_data& m)
}
while (running) {
- while (true) {
- unsigned fct = 0;
- unsigned fp = 0;
-
- /* Load ETI data from the source */
- if (m.inputReader) {
- int framesize = m.inputReader->GetNextFrame(data.getData());
-
- if (framesize == 0) {
- if (dynamic_pointer_cast<InputFileReader>(m.inputReader)) {
- etiLog.level(info) << "End of file reached.";
- running = 0;
- ret = run_modulator_state_t::normal_end;
- break;
- }
-#if defined(HAVE_ZEROMQ)
- else if (dynamic_pointer_cast<InputZeroMQReader>(m.inputReader)) {
- /* An empty frame marks a timeout. We ignore it, but we are
- * now able to handle SIGINT properly.
- *
- * Also, we reconnect zmq every 10 seconds to avoid some
- * issues, discussed in
- * https://stackoverflow.com/questions/26112992/zeromq-pub-sub-on-unreliable-connection
- *
- * > It is possible that the PUB socket sees the error
- * > while the SUB socket does not.
- * >
- * > The ZMTP RFC has a proposal for heartbeating that would
- * > solve this problem. The current best solution is for
- * > PUB sockets to send heartbeats (e.g. 1 per second) when
- * > traffic is low, and for SUB sockets to disconnect /
- * > reconnect if they stop getting these.
- *
- * We don't need a heartbeat, because our application is constant frame rate,
- * the frames themselves can act as heartbeats.
- */
-
- const auto now = chrono::steady_clock::now();
- if (last_frame_received + chrono::seconds(10) < now) {
- throw zmq_input_timeout();
- }
- }
-#endif // defined(HAVE_ZEROMQ)
- else if (dynamic_pointer_cast<InputTcpReader>(m.inputReader)) {
- /* Same as for ZeroMQ */
- }
- else {
- throw logic_error("Unhandled framesize==0!");
- }
- continue;
- }
- else if (framesize < 0) {
- etiLog.level(error) << "Input read error.";
+ unsigned fct = 0;
+ unsigned fp = 0;
+
+ /* Load ETI data from the source */
+ if (m.inputReader) {
+ int framesize = m.inputReader->GetNextFrame(data.getData());
+
+ if (framesize == 0) {
+ if (dynamic_pointer_cast<InputFileReader>(m.inputReader)) {
+ etiLog.level(info) << "End of file reached.";
running = 0;
ret = run_modulator_state_t::normal_end;
break;
}
-
- const int eti_bytes_read = m.etiReader->loadEtiData(data);
- if ((size_t)eti_bytes_read != data.getLength()) {
- etiLog.level(error) << "ETI frame incompletely read";
- throw std::runtime_error("ETI read error");
+#if defined(HAVE_ZEROMQ)
+ else if (dynamic_pointer_cast<InputZeroMQReader>(m.inputReader)) {
+ /* An empty frame marks a timeout. We ignore it, but we are
+ * now able to handle SIGINT properly.
+ *
+ * Also, we reconnect zmq every 10 seconds to avoid some
+ * issues, discussed in
+ * https://stackoverflow.com/questions/26112992/zeromq-pub-sub-on-unreliable-connection
+ *
+ * > It is possible that the PUB socket sees the error
+ * > while the SUB socket does not.
+ * >
+ * > The ZMTP RFC has a proposal for heartbeating that would
+ * > solve this problem. The current best solution is for
+ * > PUB sockets to send heartbeats (e.g. 1 per second) when
+ * > traffic is low, and for SUB sockets to disconnect /
+ * > reconnect if they stop getting these.
+ *
+ * We don't need a heartbeat, because our application is constant frame rate,
+ * the frames themselves can act as heartbeats.
+ */
+
+ const auto now = chrono::steady_clock::now();
+ if (last_frame_received + chrono::seconds(10) < now) {
+ throw zmq_input_timeout();
+ }
}
+#endif // defined(HAVE_ZEROMQ)
+ else if (dynamic_pointer_cast<InputTcpReader>(m.inputReader)) {
+ /* Same as for ZeroMQ */
+ }
+ else {
+ throw logic_error("Unhandled framesize==0!");
+ }
+ continue;
+ }
+ else if (framesize < 0) {
+ etiLog.level(error) << "Input read error.";
+ running = 0;
+ ret = run_modulator_state_t::normal_end;
+ break;
+ }
- last_frame_received = chrono::steady_clock::now();
-
- fct = m.etiReader->getFct();
- fp = m.etiReader->getFp();
+ const int eti_bytes_read = m.etiReader->loadEtiData(data);
+ if ((size_t)eti_bytes_read != data.getLength()) {
+ etiLog.level(error) << "ETI frame incompletely read";
+ throw std::runtime_error("ETI read error");
}
- else if (m.ediInput) {
- while (running and not m.ediInput->ediReader.isFrameReady()) {
- try {
- bool packet_received = m.ediInput->ediTransport.rxPacket();
- if (packet_received) {
- last_frame_received = chrono::steady_clock::now();
- }
- }
- catch (const std::runtime_error& e) {
- etiLog.level(warn) << "EDI input: " << e.what();
- running = 0;
- break;
- }
- if (last_frame_received + chrono::seconds(10) < chrono::steady_clock::now()) {
- etiLog.level(error) << "No EDI data received in 10 seconds.";
- running = 0;
- break;
+ last_frame_received = chrono::steady_clock::now();
+
+ fct = m.etiReader->getFct();
+ fp = m.etiReader->getFp();
+ }
+ else if (m.ediInput) {
+ while (running and not m.ediInput->ediReader.isFrameReady()) {
+ try {
+ bool packet_received = m.ediInput->ediTransport.rxPacket();
+ if (packet_received) {
+ last_frame_received = chrono::steady_clock::now();
}
}
+ catch (const std::runtime_error& e) {
+ etiLog.level(warn) << "EDI input: " << e.what();
+ running = 0;
+ break;
+ }
- if (!running) {
+ if (last_frame_received + chrono::seconds(10) < chrono::steady_clock::now()) {
+ etiLog.level(error) << "No EDI data received in 10 seconds.";
+ running = 0;
break;
}
+ }
- fct = m.ediInput->ediReader.getFct();
- fp = m.ediInput->ediReader.getFp();
+ if (!running) {
+ break;
}
- const unsigned expected_fct = (last_eti_fct + 1) % 250;
- if (last_eti_fct == -1) {
- if (fp != 0) {
- // Do not start the flowgraph before we get to FP 0
- // to ensure all blocks are properly aligned.
- if (m.ediInput) {
- m.ediInput->ediReader.clearFrame();
- }
- continue;
- }
- else {
- last_eti_fct = fct;
- m.framecount++;
- m.flowgraph->run();
+ fct = m.ediInput->ediReader.getFct();
+ fp = m.ediInput->ediReader.getFp();
+ }
+
+ const unsigned expected_fct = (last_eti_fct + 1) % 250;
+ if (last_eti_fct == -1) {
+ if (fp != 0) {
+ // Do not start the flowgraph before we get to FP 0
+ // to ensure all blocks are properly aligned.
+ if (m.ediInput) {
+ m.ediInput->ediReader.clearFrame();
}
+ continue;
}
- else if (fct == expected_fct) {
+ else {
last_eti_fct = fct;
m.framecount++;
m.flowgraph->run();
}
- else {
- etiLog.level(info) << "ETI FCT discontinuity, expected " <<
- expected_fct << " received " << fct;
- if (m.ediInput) {
- m.ediInput->ediReader.clearFrame();
- }
- return run_modulator_state_t::again;
- }
-
+ }
+ else if (fct == expected_fct) {
+ last_eti_fct = fct;
+ m.framecount++;
+ m.flowgraph->run();
+ }
+ else {
+ etiLog.level(info) << "ETI FCT discontinuity, expected " <<
+ expected_fct << " received " << fct;
if (m.ediInput) {
m.ediInput->ediReader.clearFrame();
}
+ return run_modulator_state_t::again;
+ }
- /* Check every once in a while if the remote control
- * is still working */
- if ((m.framecount % 250) == 0) {
- rcs.check_faults();
- }
+ if (m.ediInput) {
+ m.ediInput->ediReader.clearFrame();
+ }
+
+ /* Check every once in a while if the remote control
+ * is still working */
+ if ((m.framecount % 250) == 0) {
+ rcs.check_faults();
}
}
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 06:29:24 +0000