Merge remote-tracking branch 'upstream/master'

19 files changed, 948 insertions, 173 deletions

diff --git a/ChangeLog b/ChangeLog
index 28a9f04..e005721 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,6 +1,14 @@
 This file contains information about the changes done to
 the ODR-DabMod in this repository
 
+2014-12-09: Matthias P. Braendli <matthias@mpb.li>
+	(v0.5.0)
+	* odr-dabmod:
+		Add support for ARM processors.
+		Use FFTW instead of KISS FFT by default.
+		Add a ZeroMQ I/Q output.
+		Support more fine-grained UHD TX gain.
+		Make the -C flag optional to simplify the usage.
 2014-09-26: Matthias P. Braendli <matthias@mpb.li>
 	(v0.4.5)
 	* odr-dabmod:
diff --git a/INSTALL b/INSTALL
index f591f02..55385ba 100644
--- a/INSTALL
+++ b/INSTALL
@@ -4,34 +4,51 @@ Required dependencies:
     * Boost 1.41 or later
     * Optional ZeroMQ http://www.zeromq.org
         Use --disable-input-zeromq if you don't have it
+    * Optional FFTW 3.x (included KISS FFT is used as fallback)
 
 Simple install procedure:
 =========================
 
     % tar xjf odr-dabmod-X.Y.Z.tar.bz2      # Unpack the source
     % cd odr-dabmod-X.Y.Z                   # Change to the source directory
-    % ./configure --disable-debug --with-debug-malloc=yes --enable-fft-simd
+    % ./configure --disable-debug --with-debug-malloc=yes
                                             # Run the configure script
     % make                                  # Build ODR-DabMod
     [ as root ]
     % make install                          # Install ODR-DabMod
 
+Configure options
+=================
+The configure script can be launch with a variety of options:
+
+ --enable-input-zeromq  Enable ZeroMQ input (to be used with ODR-DabMux)
+ --enable-output-uhd    Includes the binding to the UHD driver for USRPs
+
+You have the choice between two FFT libraries: KISS FFT and FFTW. KISS FFT is a
+proven library, but it's performance is worse than with the new FFTW. With KISS
+FFT, you have the choice between using the normal version, or the SIMD
+accelerated version, which is a bit faster. The corresponding options are:
+
+ --enable-kiss-fft      Prefer KISS FFT over FFTW
+ --enable-fft-simd      Enable SIMD instructions for KISS FFT
+
+Debugging options: You should not enable debug if you need good performance.
+By default, debug is disabled.
+ --enable-debug         Do not compile with debugging, and enable optimisations
+ --enable-trace         Create debugging files for each DSP block for data analysis
+
+For more information, call:
+
+    % ./configure --help
+
 Nearly as simple install procedure using repository:
 ====================================================
 
-    * Download and install fec as above
+    * Download and install dependencies as above
     * Clone the git repository
     * Bootstrap autotools:
+        % ./bootstrap.sh
+            In case this fails, try:
         % aclocal && automake --gnu --add-missing && autoconf
-            or
-        % autoreconf
-            whichever works best
     * Then use ./configure as above
 
-
-Advanced install procedure:
-===========================
-
-The configure script can be launch with a variety of options, launch the
-following command for a complete list:
-    % ./configure --help
diff --git a/Makefile.am b/Makefile.am
index f599871..c0b3024 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,5 +1,7 @@
 # Copyright (C) 2007, 2008, 2009, 2010 Her Majesty the Queen in Right
 # of Canada (Communications Research Center Canada)
+#
+# Copyright (C) 2014 Matthias P. Braendli, http://mpb.li
 
 # This file is part of ODR-DabMod.
 # 
@@ -16,8 +18,8 @@
 # You should have received a copy of the GNU General Public License
 # along with ODR-DabMod.  If not, see <http://www.gnu.org/licenses/>.
 
-SUBDIRS	=src lib
+SUBDIRS = src lib
 
 ACLOCAL_AMFLAGS = -I m4
 
-EXTRA_DIST	=COPYING NEWS README AUTHORS ChangeLog TODO doc
+EXTRA_DIST = COPYING NEWS README.md AUTHORS ChangeLog TODO doc
diff --git a/README b/README.md
index 05290d9..8ea87c9 100644
--- a/README
+++ b/README.md
@@ -7,10 +7,11 @@ ODR-DabMod is a DAB (Digital Audio Broadcasting) modulator compliant
 to ETSI EN 300 401.
 
 In addition to the features of CRC-DabMod, this fork contains:
+
 - Configuration file support, see doc/example.ini
-- Integrated UHD output for USRP devices, bypassing gnuradio
-  - Tested for USRP1, B100, USRP2
-  - B200 support in development
+- Integrated UHD output for USRP devices
+  - Tested for B200, B100, USRP2, USRP1
+  - With WBX daughterboard (where appropriate)
 - Timestamping support required for SFN
 - A FIR filter (previously done in GNURadio by crc-dwap.py)
 - Improvements in logging (log to file, to syslog)
diff --git a/configure.ac b/configure.ac
index 07d6195..615bf6d 100644
--- a/configure.ac
+++ b/configure.ac
@@ -19,10 +19,10 @@
 # along with ODR-DabMod.  If not, see <http://www.gnu.org/licenses/>.
 
 AC_PREREQ(2.59)
-AC_INIT([ODR-DabMod], [0.4.5], [matthias.braendli@mpb.li])
+AC_INIT([ODR-DabMod], [0.5.0], [matthias.braendli@mpb.li])
 AC_CONFIG_AUX_DIR([build-aux])
 AC_CANONICAL_SYSTEM
-AM_INIT_AUTOMAKE([-Wall])
+AM_INIT_AUTOMAKE([-Wall foreign])
 AC_CONFIG_SRCDIR([src/DabMod.cpp])
 AM_CONFIG_HEADER([config.h])
 AM_SILENT_RULES([yes])
@@ -48,61 +48,95 @@ AC_PROG_MKDIR_P
 
 EXTRA=""
 AC_ARG_ENABLE([debug],
-        [AS_HELP_STRING([--disable-debug], [Disable debugger symbols])],
-        [], [enable_debug=yes])
+        [AS_HELP_STRING([--enable-debug], [Enable debugger symbols])],
+        [], [enable_debug=no])
 AC_ARG_ENABLE([prof],
         [AS_HELP_STRING([--enable-prof], [Enable profiling])],
         [], [enable_prof=no])
 AC_ARG_WITH([debug-malloc],
-        [AS_HELP_STRING([--with-debug-malloc[=yes|no|duma|efence|...]],
+        [AS_HELP_STRING([--with-debug-malloc[=no|yes|duma|efence|...]],
             [Add malloc debugger support])],
-        [], [with_debug_malloc=yes])
+        [], [with_debug_malloc=no])
 AC_ARG_ENABLE([trace],
         [AS_HELP_STRING([--enable-trace], [Enable trace output])],
         [], [enable_trace=no])
+
+# Which FFT library to use
 AC_ARG_ENABLE([fft_simd],
-        [AS_HELP_STRING([--enable-fft-simd], [Enable SIMD instructions for kiss-fft (unstable)])],
+        [AS_HELP_STRING([--enable-fft-simd],
+                        [Enable SIMD instructions for kiss-fft (unstable)])],
         [], [enable_fft_simd=no])
+AC_ARG_ENABLE([kiss_fft],
+        [AS_HELP_STRING([--enable-kiss-fft], [Prefer KISS FFT over FFTW3])],
+        [], [enable_kiss=no])
+
 # ZeroMQ message queue input
 AC_ARG_ENABLE([input_zeromq],
         AS_HELP_STRING([--enable-input-zeromq], [Enable ZeroMQ input]))
+
+# ZeroMQ message IQ output
+AC_ARG_ENABLE([output_zeromq],
+        AS_HELP_STRING([--enable-output-zeromq], [Enable ZeroMQ output]))
+
 # UHD support control
 AC_ARG_ENABLE([output_uhd],
         [AS_HELP_STRING([--enable-output-uhd], [Enable UHD output])],
         [], [enable_output_uhd=yes])
 
+AS_IF([test "x$enable_kiss" = "xno"],
+      [PKG_CHECK_MODULES([FFTW], [fftw3f], enable_fftw=yes, enable_fftw=no)],
+      [enable_fftw=no])
+
+AS_IF([test "x$enable_fftw" = "xyes"],
+      AC_MSG_NOTICE([Found FFTW3]),
+      AC_MSG_NOTICE([Using Kiss FFT]) )
+
+echo "Checking input zeromq"
+
 AS_IF([test "x$enable_input_zeromq" = "xyes"],
         [AC_DEFINE(HAVE_INPUT_ZEROMQ, [1], [Define if ZeroMQ input is enabled]) ,
-         AC_CHECK_LIB(zmq, zmq_init, ,[AC_MSG_ERROR([ZeroMQ libzmq is required])])])
+         AC_CHECK_LIB(zmq, zmq_init, ZMQ_LIBS="-lzmq" ,[AC_MSG_ERROR([ZeroMQ libzmq is required])])])
+AS_IF([test "x$enable_output_zeromq" = "xyes"],
+        [AC_DEFINE(HAVE_OUTPUT_ZEROMQ, [1], [Define if ZeroMQ output is enabled]) ,
+         AC_CHECK_LIB(zmq, zmq_init, ZMQ_LIBS="-lzmq" ,[AC_MSG_ERROR([ZeroMQ libzmq is required])])])
 AS_IF([test "x$enable_debug" = "xno"],
         [OPTIM="-O2" DEBUG="" EXTRA="$EXTRA -DNDEBUG"],
-        [OPTIM="-O0" DEBUG="-ggdb" EXTRA="$EXTRA -Wall"])
+        [OPTIM="-O0" DEBUG="-ggdb" EXTRA="$EXTRA"])
 AS_IF([test "x$enable_prof" != "xno"],
         [EXTRA="$EXTRA -pg"])
-AS_IF([test "x$enable_trace" != "xno"],
-        [EXTRA="$EXTRA -DDEBUG"])
-AS_IF([test "x$enable_fft_simd" != "xno"],
-        [EXTRA="$EXTRA -DUSE_SIMD"])
 
-AM_CONDITIONAL([HAVE_INPUT_ZEROMQ_TEST], [test "x$enable_input_zeromq" = "xyes"])
+# Define conditionals for Makefile.am
+AM_CONDITIONAL([USE_KISS_FFT], [test "x$enable_fftw" = "xno"])
+AM_CONDITIONAL([DEBUG], [test "x$enable_trace" = "xyes"])
+AM_CONDITIONAL([IS_GIT_REPO], [test -d '.git'])
+
+# Defines for config.h
+AS_IF([test "x$enable_fft_simd" = "xyes"],
+      [AC_DEFINE(USE_SIMD, [1], [Define to enable KISS FFT SIMD])])
+AS_IF([test "x$enable_fftw" = "xno"],
+      [AC_DEFINE(USE_KISS_FFT, [1], [Define to enable KISS])])
+AS_IF([test "x$enable_fftw" = "xyes"],
+      [AC_DEFINE(USE_FFTW, [1], [Define to enable FFTW])])
 
+AX_PTHREAD([], AC_MSG_ERROR([requires pthread]))
 
-AC_SUBST([CFLAGS], ["$OPTIM $DEBUG $EXTRA"])
-AC_SUBST([CXXFLAGS], ["$OPTIM $DEBUG $EXTRA"])
+AC_SUBST([CFLAGS], ["$OPTIM $DEBUG $EXTRA $FFTW_CFLAGS $PTHREAD_CFLAGS"])
+AC_SUBST([CXXFLAGS], ["$OPTIM $DEBUG $EXTRA $FFTW_CFLAGS $PTHREAD_CFLAGS"])
+AC_SUBST([LIBS], ["$FFTW_LIBS $PTHREAD_LIBS $ZMQ_LIBS"])
 
+# Checks for UHD.
 AS_IF([test "x$enable_output_uhd" = "xyes"],
         [AC_DEFINE(HAVE_OUTPUT_UHD, [1], [Define if UHD output is enabled]) ,
          AC_CHECK_LIB([uhd], [main], [], [AC_MSG_ERROR([library uhd is missing])])])
 
-AM_CONDITIONAL([HAVE_OUTPUT_UHD_TEST], [test "x$enable_output_uhd" = "xyes"])
-
 AX_BOOST_BASE([1.41.0], [], AC_MSG_ERROR([BOOST 1.41 or later is required]))
 AC_CHECK_LIB([boost_system], [main], [], [AC_MSG_ERROR([library boost_system is missing])])
 AC_CHECK_LIB([boost_thread], [main], [], [AC_MSG_ERROR([library boost_thread is missing])])
 
 AC_CHECK_LIB([rt], [clock_gettime], [], [AC_MSG_ERROR([library rt is missing])])
 
-# Checks for libraries.
+# Tests for different memory allocation debuggers.
+# Valgrind doesn't need any.
 AS_IF([test "x$enable_debug" != "xno"],
         [AS_IF([test "x$with_debug_malloc" != "xno"],
             [AS_IF([test "x$with_debug_malloc" = "xyes"],
@@ -133,6 +167,7 @@ AC_COMPILE_IFELSE(
         [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]) AC_DEFINE([M_PIl], [M_PI], [Replacing define])])
 AC_LANG_POP([C++])
 
+
 # Check for SSE
 AC_MSG_CHECKING(for SSE in current arch/CFLAGS)
 AC_LINK_IFELSE([
@@ -153,7 +188,7 @@ AC_MSG_RESULT($has_sse)
 
 AM_CONDITIONAL([HAVE_SSE], [test "x$has_sse" = "xyes"])
 
-AM_CONDITIONAL([IS_GIT_REPO], [test -d '.git'])
+# TODO: Check for NEON
 
 AC_TYPE_SIGNAL
 AC_CHECK_FUNCS([bzero floor ftime gettimeofday memset sqrt strchr strerror strtol])
@@ -162,3 +197,37 @@ AC_CONFIG_FILES([Makefile
                  lib/Makefile
                  src/Makefile])
 AC_OUTPUT
+
+echo
+echo "***********************************************"
+echo
+enabled=""
+disabled=""
+for feat in debug prof trace fftw fft_simd output_uhd input_zeromq output_zeromq
+do
+    eval var=\$enable_$feat
+    AS_IF([test "x$var" = "xyes"],
+          [enabled="$enabled $feat"],
+          [disabled="$disabled $feat"])
+done
+echo "  Features"
+echo "  Enabled: $enabled"
+echo "  Disabled: $disabled"
+echo
+echo
+enabled=""
+disabled=""
+for feat in with_debug_malloc has_sse
+do
+    eval var=\$$feat
+    AS_IF([test "x$var" != "xno"],
+          [enabled="$enabled $feat"],
+          [disabled="$disabled $feat"])
+done
+echo "  Options"
+echo "  Active: $enabled"
+echo "  Disabled: $disabled"
+
+echo
+echo "***********************************************"
+echo
diff --git a/doc/example.ini b/doc/example.ini
index 9cdfe03..e1ce252 100644
--- a/doc/example.ini
+++ b/doc/example.ini
@@ -106,8 +106,11 @@ filename=/dev/stdout
 ; or even a higher factor.
 ;
 ; Settings for a USRP B100:
-device=master_clock_rate=32768000,type=b100
-txgain=2
+device=
+; you can put additional UHD device settings here
+master_clock_rate=32768000
+type=b100
+txgain=2.0
 ; Try first with small gain values
 ; Also set rate to 2048000
 
@@ -116,7 +119,9 @@ txgain=2
 ; http://opendigitalradio.org/index.php/USRP_B200_Measurements
 ;
 ; Settings:
-;device=master_clock_rate=20480000,type=b200
+;device=
+;master_clock_rate=20480000
+;type=b200
 ;txgain=40
 ; The B200 needs larger gains (up to 89dB) but,
 ; "Gain settings are application specific, but it is recommended that users
@@ -127,7 +132,8 @@ txgain=2
 
 
 ; For the USRP1
-;device=type=usrp1
+;device=
+;type=usrp1
 ; the usrp1 can have two daughterboards, the subdevice parameter allows you
 ; to choose which one to use
 ;subdevice=A:0
diff --git a/m4/ax_pthread.m4 b/m4/ax_pthread.m4
new file mode 100644
index 0000000..d383ad5
--- /dev/null
+++ b/m4/ax_pthread.m4
@@ -0,0 +1,332 @@
+# ===========================================================================
+#        http://www.gnu.org/software/autoconf-archive/ax_pthread.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#
+# DESCRIPTION
+#
+#   This macro figures out how to build C programs using POSIX threads. It
+#   sets the PTHREAD_LIBS output variable to the threads library and linker
+#   flags, and the PTHREAD_CFLAGS output variable to any special C compiler
+#   flags that are needed. (The user can also force certain compiler
+#   flags/libs to be tested by setting these environment variables.)
+#
+#   Also sets PTHREAD_CC to any special C compiler that is needed for
+#   multi-threaded programs (defaults to the value of CC otherwise). (This
+#   is necessary on AIX to use the special cc_r compiler alias.)
+#
+#   NOTE: You are assumed to not only compile your program with these flags,
+#   but also link it with them as well. e.g. you should link with
+#   $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
+#
+#   If you are only building threads programs, you may wish to use these
+#   variables in your default LIBS, CFLAGS, and CC:
+#
+#     LIBS="$PTHREAD_LIBS $LIBS"
+#     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+#     CC="$PTHREAD_CC"
+#
+#   In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
+#   has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name
+#   (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#
+#   Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
+#   PTHREAD_PRIO_INHERIT symbol is defined when compiling with
+#   PTHREAD_CFLAGS.
+#
+#   ACTION-IF-FOUND is a list of shell commands to run if a threads library
+#   is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
+#   is not found. If ACTION-IF-FOUND is not specified, the default action
+#   will define HAVE_PTHREAD.
+#
+#   Please let the authors know if this macro fails on any platform, or if
+#   you have any other suggestions or comments. This macro was based on work
+#   by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
+#   from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
+#   Alejandro Forero Cuervo to the autoconf macro repository. We are also
+#   grateful for the helpful feedback of numerous users.
+#
+#   Updated for Autoconf 2.68 by Daniel Richard G.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   Copyright (c) 2011 Daniel Richard G. <skunk@iSKUNK.ORG>
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 21
+
+AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
+AC_DEFUN([AX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_LANG_PUSH([C])
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
+        AC_TRY_LINK_FUNC([pthread_join], [ax_pthread_ok=yes])
+        AC_MSG_RESULT([$ax_pthread_ok])
+        if test x"$ax_pthread_ok" = xno; then
+                PTHREAD_LIBS=""
+                PTHREAD_CFLAGS=""
+        fi
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try.  Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important.  Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+#       other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+#      doesn't hurt to check since this sometimes defines pthreads too;
+#      also defines -D_REENTRANT)
+#      ... -mt is also the pthreads flag for HP/aCC
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case ${host_os} in
+        solaris*)
+
+        # On Solaris (at least, for some versions), libc contains stubbed
+        # (non-functional) versions of the pthreads routines, so link-based
+        # tests will erroneously succeed.  (We need to link with -pthreads/-mt/
+        # -lpthread.)  (The stubs are missing pthread_cleanup_push, or rather
+        # a function called by this macro, so we could check for that, but
+        # who knows whether they'll stub that too in a future libc.)  So,
+        # we'll just look for -pthreads and -lpthread first:
+
+        ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags"
+        ;;
+
+        darwin*)
+        ax_pthread_flags="-pthread $ax_pthread_flags"
+        ;;
+esac
+
+# Clang doesn't consider unrecognized options an error unless we specify
+# -Werror. We throw in some extra Clang-specific options to ensure that
+# this doesn't happen for GCC, which also accepts -Werror.
+
+AC_MSG_CHECKING([if compiler needs -Werror to reject unknown flags])
+save_CFLAGS="$CFLAGS"
+ax_pthread_extra_flags="-Werror"
+CFLAGS="$CFLAGS $ax_pthread_extra_flags -Wunknown-warning-option -Wsizeof-array-argument"
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([int foo(void);],[foo()])],
+                  [AC_MSG_RESULT([yes])],
+                  [ax_pthread_extra_flags=
+                   AC_MSG_RESULT([no])])
+CFLAGS="$save_CFLAGS"
+
+if test x"$ax_pthread_ok" = xno; then
+for flag in $ax_pthread_flags; do
+
+        case $flag in
+                none)
+                AC_MSG_CHECKING([whether pthreads work without any flags])
+                ;;
+
+                -*)
+                AC_MSG_CHECKING([whether pthreads work with $flag])
+                PTHREAD_CFLAGS="$flag"
+                ;;
+
+                pthread-config)
+                AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no])
+                if test x"$ax_pthread_config" = xno; then continue; fi
+                PTHREAD_CFLAGS="`pthread-config --cflags`"
+                PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+                ;;
+
+                *)
+                AC_MSG_CHECKING([for the pthreads library -l$flag])
+                PTHREAD_LIBS="-l$flag"
+                ;;
+        esac
+
+        save_LIBS="$LIBS"
+        save_CFLAGS="$CFLAGS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS $ax_pthread_extra_flags"
+
+        # Check for various functions.  We must include pthread.h,
+        # since some functions may be macros.  (On the Sequent, we
+        # need a special flag -Kthread to make this header compile.)
+        # We check for pthread_join because it is in -lpthread on IRIX
+        # while pthread_create is in libc.  We check for pthread_attr_init
+        # due to DEC craziness with -lpthreads.  We check for
+        # pthread_cleanup_push because it is one of the few pthread
+        # functions on Solaris that doesn't have a non-functional libc stub.
+        # We try pthread_create on general principles.
+        AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
+                        static void routine(void *a) { a = 0; }
+                        static void *start_routine(void *a) { return a; }],
+                       [pthread_t th; pthread_attr_t attr;
+                        pthread_create(&th, 0, start_routine, 0);
+                        pthread_join(th, 0);
+                        pthread_attr_init(&attr);
+                        pthread_cleanup_push(routine, 0);
+                        pthread_cleanup_pop(0) /* ; */])],
+                [ax_pthread_ok=yes],
+                [])
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+
+        AC_MSG_RESULT([$ax_pthread_ok])
+        if test "x$ax_pthread_ok" = xyes; then
+                break;
+        fi
+
+        PTHREAD_LIBS=""
+        PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = xyes; then
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+        # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+        AC_MSG_CHECKING([for joinable pthread attribute])
+        attr_name=unknown
+        for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+            AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+                           [int attr = $attr; return attr /* ; */])],
+                [attr_name=$attr; break],
+                [])
+        done
+        AC_MSG_RESULT([$attr_name])
+        if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+            AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE], [$attr_name],
+                               [Define to necessary symbol if this constant
+                                uses a non-standard name on your system.])
+        fi
+
+        AC_MSG_CHECKING([if more special flags are required for pthreads])
+        flag=no
+        case ${host_os} in
+            aix* | freebsd* | darwin*) flag="-D_THREAD_SAFE";;
+            osf* | hpux*) flag="-D_REENTRANT";;
+            solaris*)
+            if test "$GCC" = "yes"; then
+                flag="-D_REENTRANT"
+            else
+                # TODO: What about Clang on Solaris?
+                flag="-mt -D_REENTRANT"
+            fi
+            ;;
+        esac
+        AC_MSG_RESULT([$flag])
+        if test "x$flag" != xno; then
+            PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+        fi
+
+        AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
+            [ax_cv_PTHREAD_PRIO_INHERIT], [
+                AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
+                                                [[int i = PTHREAD_PRIO_INHERIT;]])],
+                    [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+                    [ax_cv_PTHREAD_PRIO_INHERIT=no])
+            ])
+        AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes"],
+            [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])])
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+
+        # More AIX lossage: compile with *_r variant
+        if test "x$GCC" != xyes; then
+            case $host_os in
+                aix*)
+                AS_CASE(["x/$CC"],
+                  [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
+                  [#handle absolute path differently from PATH based program lookup
+                   AS_CASE(["x$CC"],
+                     [x/*],
+                     [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
+                     [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
+                ;;
+            esac
+        fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+AC_SUBST([PTHREAD_LIBS])
+AC_SUBST([PTHREAD_CFLAGS])
+AC_SUBST([PTHREAD_CC])
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$ax_pthread_ok" = xyes; then
+        ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1])
+        :
+else
+        ax_pthread_ok=no
+        $2
+fi
+AC_LANG_POP
+])dnl AX_PTHREAD
diff --git a/src/DabMod.cpp b/src/DabMod.cpp
index 67ad12d..91c0b9d 100644
--- a/src/DabMod.cpp
+++ b/src/DabMod.cpp
@@ -38,6 +38,7 @@
 #if defined(HAVE_OUTPUT_UHD)
 #   include "OutputUHD.h"
 #endif
+#include "OutputZeroMQ.h"
 #include "InputReader.h"
 #include "PcDebug.h"
 #include "TimestampDecoder.h"
@@ -91,11 +92,11 @@ void printUsage(char* progName, FILE* out = stderr)
 #endif
             __DATE__, __TIME__);
     fprintf(out, "Usage with configuration file:\n");
-    fprintf(out, "\t%s -C config_file.ini\n\n", progName);
+    fprintf(out, "\t%s [-C] config_file.ini\n\n", progName);
 
     fprintf(out, "Usage with command line options:\n");
     fprintf(out, "\t%s"
-            " [input]"
+            " input"
             " (-f filename | -u uhddevice -F frequency) "
             " [-G txgain]"
             " [-o offset]"
@@ -137,8 +138,13 @@ void printVersion(FILE *out = stderr)
 {
     fprintf(out, "Welcome to %s %s, compiled at %s, %s\n\n",
             PACKAGE, VERSION, __DATE__, __TIME__);
-    fprintf(out, "ODR-DabMod is copyright (C) Her Majesty the Queen in Right of Canada,\n"
-            "    2009, 2010, 2011, 2012 Communications Research Centre (CRC).\n"
+    fprintf(out,
+            "    ODR-DabMod is copyright (C) Her Majesty the Queen in Right of Canada,\n"
+            "    2009, 2010, 2011, 2012 Communications Research Centre (CRC),\n"
+            "     and\n"
+            "    Copyright (C) 2014 Matthias P. Braendli, matthias.braendli@mpb.li\n"
+            "\n"
+            "    http://opendigitalradio.org\n"
             "\n"
             "    This program is available free of charge and is licensed to you on a\n"
             "    non-exclusive basis; you may not redistribute it.\n"
@@ -151,8 +157,10 @@ void printVersion(FILE *out = stderr)
             "    In no event shall CRC be LIABLE for any LOSS, DAMAGE or COST that may be\n"
             "    incurred in connection with the use of this software.\n"
             "\n"
+#if USE_KISS_FFT
             "ODR-DabMod makes use of the following open source packages:\n"
             "    Kiss FFT v1.2.9 (Revised BSD) - http://kissfft.sourceforge.net/\n"
+#endif
            );
 
 }
@@ -166,6 +174,7 @@ int main(int argc, char* argv[])
     std::string inputTransport = "file";
 
     std::string outputName;
+    int useZeroMQOutput = 0;
     int useFileOutput = 0;
     int useUHDOutput = 0;
 
@@ -257,7 +266,7 @@ int main(int argc, char* argv[])
             break;
         case 'G':
 #if defined(HAVE_OUTPUT_UHD)
-            outputuhd_conf.txgain = (int)strtol(optarg, NULL, 10);
+            outputuhd_conf.txgain = strtod(optarg, NULL);
 #endif
             break;
         case 'l':
@@ -330,11 +339,47 @@ int main(int argc, char* argv[])
 #endif
             << std::endl;
 
+    std::cerr << "Using FFT library " <<
+#if defined(USE_FFTW)
+        "FFTW" <<
+#endif
+#if defined(USE_KISS_FFT)
+        "Kiss FFT" <<
+#endif
+#if defined(USE_SIMD)
+        " (with fft_simd)" <<
+#endif
+        "\n";
+
+    std::cerr << "Compiled with features: " <<
+#if defined(HAVE_INPUT_ZEROMQ)
+        "input_zeromq " <<
+#endif
+#if defined(HAVE_OUTPUT_UHD)
+        "output_uhd " <<
+#endif
+#if defined(HAVE_OUTPUT_ZEROMQ)
+        "output_zeromq " <<
+#endif
+        "\n";
+
     if (use_configuration_file && use_configuration_cmdline) {
         fprintf(stderr, "Warning: configuration file and command line parameters are defined:\n\t"
                         "Command line parameters override settings in the configuration file !\n");
     }
 
+    // No argument given ? You can't be serious ! Show usage.
+    if (argc == 1) {
+        printUsage(argv[0]);
+        goto END_MAIN;
+    }
+
+    // If only one argument is given, interpret as configuration file name
+    if (argc == 2) {
+        use_configuration_file = true;
+        configuration_file = argv[1];
+    }
+
     if (use_configuration_file) {
         // First read parameters from the file
         using boost::property_tree::ptree;
@@ -399,7 +444,7 @@ int main(int argc, char* argv[])
         clockRate = pt.get("modulator.dac_clk_rate", (size_t)0);
         digitalgain = pt.get("modulator.digital_gain", digitalgain);
         outputRate = pt.get("modulator.rate", outputRate);
-        
+
         // FIR Filter parameters:
         if (pt.get("firfilter.enabled", 0) == 1) {
             try {
@@ -451,7 +496,7 @@ int main(int argc, char* argv[])
                     "setting type in [uhd] device is deprecated !\n";
             }
 
-            outputuhd_conf.txgain = pt.get("uhdoutput.txgain", 0);
+            outputuhd_conf.txgain = pt.get("uhdoutput.txgain", 0.0);
             outputuhd_conf.frequency = pt.get<double>("uhdoutput.frequency", 0);
             std::string chan = pt.get<std::string>("uhdoutput.channel", "");
 
@@ -531,6 +576,12 @@ int main(int argc, char* argv[])
             useUHDOutput = 1;
         }
 #endif
+#if defined(HAVE_OUTPUT_ZEROMQ)
+        else if (output_selected == "zmq") {
+            outputName = pt.get<std::string>("zmqoutput.listen");
+            useZeroMQOutput = 1;
+        }
+#endif
         else {
             std::cerr << "Error: Invalid output defined.\n";
             goto END_MAIN;
@@ -563,6 +614,7 @@ int main(int argc, char* argv[])
         outputuhd_conf.muteNoTimestamps = (pt.get("delaymanagement.mutenotimestamps", 0) == 1);
 #endif
     }
+
     if (!rc) {
         logger.level(warn) << "No Remote-Control started";
         rc = new RemoteControllerDummy();
@@ -584,7 +636,7 @@ int main(int argc, char* argv[])
     }
 
     // Setting ETI input filename
-    if (inputName == "") {
+    if (use_configuration_cmdline && inputName == "") {
         if (optind < argc) {
             inputName = argv[optind++];
 
@@ -600,7 +652,7 @@ int main(int argc, char* argv[])
     }
 
     // Checking unused arguments
-    if (optind != argc) {
+    if (use_configuration_cmdline && optind != argc) {
         fprintf(stderr, "Invalid arguments:");
         while (optind != argc) {
             fprintf(stderr, " %s", argv[optind++]);
@@ -612,7 +664,7 @@ int main(int argc, char* argv[])
         goto END_MAIN;
     }
 
-    if (!useFileOutput && !useUHDOutput) {
+    if (!useFileOutput && !useUHDOutput && !useZeroMQOutput) {
         logger.level(error) << "Output not specified";
         fprintf(stderr, "Must specify output !");
         goto END_MAIN;
@@ -623,8 +675,12 @@ int main(int argc, char* argv[])
     fprintf(stderr, "  Type: %s\n", inputTransport.c_str());
     fprintf(stderr, "  Source: %s\n", inputName.c_str());
     fprintf(stderr, "Output\n");
+
+    if (useFileOutput) {
+        fprintf(stderr, "  Name: %s\n", outputName.c_str());
+    }
 #if defined(HAVE_OUTPUT_UHD)
-    if (useUHDOutput) {
+    else if (useUHDOutput) {
         fprintf(stderr, " UHD\n"
                         "  Device: %s\n"
                         "  Type: %s\n"
@@ -633,12 +689,13 @@ int main(int argc, char* argv[])
                 outputuhd_conf.usrpType.c_str(),
                 outputuhd_conf.masterClockRate);
     }
-    else if (useFileOutput) {
-#else
-    if (useFileOutput) {
 #endif
-        fprintf(stderr, "  Name: %s\n", outputName.c_str());
+    else if (useZeroMQOutput) {
+        fprintf(stderr, " ZeroMQ\n"
+                        "  Listening on: %s\n",
+                        outputName.c_str());
     }
+
     fprintf(stderr, "  Sampling rate: ");
     if (outputRate > 1000) {
         if (outputRate > 1000000) {
@@ -713,6 +770,14 @@ int main(int argc, char* argv[])
         }
     }
 #endif
+#if defined(HAVE_OUTPUT_ZEROMQ)
+    else if (useZeroMQOutput) {
+        /* We normalise the same way as for the UHD output */
+        normalise = 1.0f/50000.0f;
+
+        output = new OutputZeroMQ(outputName);
+    }
+#endif
 
     flowgraph = new Flowgraph();
     data.setLength(6144);
diff --git a/src/GainControl.cpp b/src/GainControl.cpp
index a34dcf2..03d8aa6 100644
--- a/src/GainControl.cpp
+++ b/src/GainControl.cpp
@@ -27,12 +27,20 @@
 
 #include "GainControl.h"
 #include "PcDebug.h"
-#include "kiss_fftsimd.h"
 
 #include <stdio.h>
 #include <stdexcept>
 #include <string>
 
+#ifdef __SSE__
+#  include <xmmintrin.h>
+union __u128 {
+    __m128 m;
+    float f[4];
+};
+#endif
+
+
 using namespace std;
 
 
diff --git a/src/Makefile.am b/src/Makefile.am
index f6102e9..922ce52 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -22,95 +22,105 @@ else
 GITVERSION_FLAGS =
 endif
 
-if HAVE_INPUT_ZEROMQ_TEST
-ZMQ_LIBS    =-lzmq
-else
-ZMQ_LIBS    =
-endif
-
-if HAVE_OUTPUT_UHD_TEST
-UHD_SOURCES    =OutputUHD.cpp OutputUHD.h
-else
-UHD_SOURCES    =
-endif
-
 if HAVE_SSE
 SIMD_CFLAGS = -msse -msse2
 else
 SIMD_CFLAGS =
 endif
 
+bin_PROGRAMS = odr-dabmod
+
+if USE_KISS_FFT
 FFT_DIR=$(top_builddir)/lib/kiss_fft129
 FFT_INC=-I$(FFT_DIR) -I$(FFT_DIR)/tools
-FFT_SRC=$(FFT_DIR)/kiss_fft.c $(FFT_DIR)/kiss_fft.h $(FFT_DIR)/tools/kiss_fftr.c $(FFT_DIR)/tools/kiss_fftr.h kiss_fftsimd.c kiss_fftsimd.h
+FFT_SRC=$(FFT_DIR)/kiss_fft.c \
+		$(FFT_DIR)/kiss_fft.h \
+		$(FFT_DIR)/tools/kiss_fftr.c \
+		$(FFT_DIR)/tools/kiss_fftr.h \
+		kiss_fftsimd.c \
+		kiss_fftsimd.h
 FFT_FLG=-ffast-math
 
 .PHONY: kiss_fft129 reed-solomon-4.0
 
-bin_PROGRAMS =  odr-dabmod
+DabModulator.cpp: $(FFT_DIR)
 
-DabModulator.cpp:   $(FFT_DIR)
+BUILT_SOURCES: $(FFT_DIR)
 
-BUILT_SOURCES:  $(FFT_DIR)
+FFT_LDADD=
 
 $(FFT_DIR):
 	if [ ! -e $(FFT_DIR) ]; then \
 		tar xzf $(top_srcdir)/lib/kiss_fft129.tar.gz -C $(top_builddir)/lib; \
 	fi
 
-odr_dabmod_CPPFLAGS = -Wall $(FFT_INC) $(FFT_FLG) $(SIMD_CFLAGS) $(GITVERSION_FLAGS)
-odr_dabmod_LDADD    = $(ZMQ_LIBS)
+else
+FFT_LDADD=
+FFT_DIR=
+FFT_INC=
+FFT_SRC=
+FFT_FLG=
+endif
+
+odr_dabmod_CPPFLAGS = -Wall \
+					  $(FFT_INC) $(FFT_FLG) $(SIMD_CFLAGS) $(GITVERSION_FLAGS)
+odr_dabmod_LDADD    = $(FFT_LDADD)
 odr_dabmod_SOURCES  = DabMod.cpp \
-                      PcDebug.h \
-                      porting.c porting.h \
-                      DabModulator.cpp DabModulator.h  \
-                      Buffer.cpp Buffer.h \
-                      ModCodec.cpp ModCodec.h \
-                      ModPlugin.cpp ModPlugin.h \
-                      ModFormat.cpp ModFormat.h \
-                      EtiReader.cpp EtiReader.h \
-                      Eti.cpp Eti.h \
-                      FicSource.cpp FicSource.h \
+					  PcDebug.h \
+					  porting.c porting.h \
+					  DabModulator.cpp DabModulator.h  \
+					  Buffer.cpp Buffer.h \
+					  ModCodec.cpp ModCodec.h \
+					  ModPlugin.cpp ModPlugin.h \
+					  ModFormat.cpp ModFormat.h \
+					  EtiReader.cpp EtiReader.h \
+					  Eti.cpp Eti.h \
+					  FicSource.cpp FicSource.h \
 					  FIRFilter.cpp FIRFilter.h \
-                      ModInput.cpp ModInput.h \
-                      PuncturingRule.cpp PuncturingRule.h \
-                      PuncturingEncoder.cpp PuncturingEncoder.h \
-                      SubchannelSource.cpp SubchannelSource.h \
-                      Flowgraph.cpp Flowgraph.h \
-                      GainControl.cpp GainControl.h \
-                      OutputMemory.cpp OutputMemory.h \
+					  ModInput.cpp ModInput.h \
+					  PuncturingRule.cpp PuncturingRule.h \
+					  PuncturingEncoder.cpp PuncturingEncoder.h \
+					  SubchannelSource.cpp SubchannelSource.h \
+					  Flowgraph.cpp Flowgraph.h \
+					  GainControl.cpp GainControl.h \
+					  OutputMemory.cpp OutputMemory.h \
+					  OutputZeroMQ.cpp OutputZeroMQ.h \
 					  TimestampDecoder.h TimestampDecoder.cpp \
-                      $(UHD_SOURCES) \
-                      ModOutput.cpp ModOutput.h \
-                      InputMemory.cpp InputMemory.h \
+					  OutputUHD.cpp OutputUHD.h \
+					  ModOutput.cpp ModOutput.h \
+					  InputMemory.cpp InputMemory.h \
 					  InputFileReader.cpp InputZeroMQReader.cpp InputReader.h \
-                      OutputFile.cpp OutputFile.h \
-                      FrameMultiplexer.cpp FrameMultiplexer.h \
-                      ModMux.cpp ModMux.h \
-                      PrbsGenerator.cpp PrbsGenerator.h \
-                      BlockPartitioner.cpp BlockPartitioner.h \
-                      QpskSymbolMapper.cpp QpskSymbolMapper.h \
-                      FrequencyInterleaver.cpp FrequencyInterleaver.h \
-                      PhaseReference.cpp PhaseReference.h \
-                      DifferentialModulator.cpp DifferentialModulator.h \
-                      NullSymbol.cpp NullSymbol.h \
-                      SignalMultiplexer.cpp SignalMultiplexer.h \
-                      CicEqualizer.cpp CicEqualizer.h \
-                      OfdmGenerator.cpp OfdmGenerator.h \
-                      GuardIntervalInserter.cpp GuardIntervalInserter.h \
-                      Resampler.cpp Resampler.h \
-                      ConvEncoder.cpp ConvEncoder.h \
-                      TimeInterleaver.cpp TimeInterleaver.h \
+					  OutputFile.cpp OutputFile.h \
+					  FrameMultiplexer.cpp FrameMultiplexer.h \
+					  ModMux.cpp ModMux.h \
+					  PrbsGenerator.cpp PrbsGenerator.h \
+					  BlockPartitioner.cpp BlockPartitioner.h \
+					  QpskSymbolMapper.cpp QpskSymbolMapper.h \
+					  FrequencyInterleaver.cpp FrequencyInterleaver.h \
+					  PhaseReference.cpp PhaseReference.h \
+					  DifferentialModulator.cpp DifferentialModulator.h \
+					  NullSymbol.cpp NullSymbol.h \
+					  SignalMultiplexer.cpp SignalMultiplexer.h \
+					  CicEqualizer.cpp CicEqualizer.h \
+					  OfdmGenerator.cpp OfdmGenerator.h \
+					  GuardIntervalInserter.cpp GuardIntervalInserter.h \
+					  Resampler.cpp Resampler.h \
+					  ConvEncoder.cpp ConvEncoder.h \
+					  TimeInterleaver.cpp TimeInterleaver.h \
 					  ThreadsafeQueue.h \
 					  Log.cpp Log.h \
 					  RemoteControl.cpp RemoteControl.h \
 					  zmq.hpp
 
-nodist_odr_dabmod_SOURCES	=$(FFT_SRC)
+nodist_odr_dabmod_SOURCES = $(FFT_SRC)
 
-dist_bin_SCRIPTS	=crc-dwap.py
+dist_bin_SCRIPTS = crc-dwap.py
 
-EXTRA_DIST	=kiss_fftsimd.c kiss_fftsimd.h
+if USE_KISS_FFT
+EXTRA_DIST = kiss_fftsimd.c kiss_fftsimd.h
 
 clean-local:
 	rm -rf $(FFT_DIR)
+
+endif
+
diff --git a/src/OfdmGenerator.cpp b/src/OfdmGenerator.cpp
index c7e8ebf..7044249 100644
--- a/src/OfdmGenerator.cpp
+++ b/src/OfdmGenerator.cpp
@@ -1,6 +1,11 @@
 /*
    Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010, 2011 Her Majesty
    the Queen in Right of Canada (Communications Research Center Canada)
+
+   Copyright (C) 2014
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://opendigitalradio.org
  */
 /*
    This file is part of ODR-DabMod.
@@ -21,9 +26,15 @@
 
 #include "OfdmGenerator.h"
 #include "PcDebug.h"
-#include "kiss_fftsimd.h"
+#if USE_FFTW
+#  include "fftw3.h"
+#  define FFT_TYPE fftwf_complex
+#else
+#  include "kiss_fftsimd.h"
+#endif
 
 #include <stdio.h>
+#include <string.h>
 #include <stdexcept>
 #include <assert.h>
 #include <complex>
@@ -37,7 +48,11 @@ OfdmGenerator::OfdmGenerator(size_t nbSymbols,
     ModCodec(ModFormat(nbSymbols * nbCarriers * sizeof(FFT_TYPE)),
             ModFormat(nbSymbols * spacing * sizeof(FFT_TYPE))),
     myFftPlan(NULL),
+#if USE_FFTW
+    myFftIn(NULL), myFftOut(NULL),
+#else
     myFftBuffer(NULL),
+#endif
     myNbSymbols(nbSymbols),
     myNbCarriers(nbCarriers),
     mySpacing(spacing)
@@ -57,7 +72,8 @@ OfdmGenerator::OfdmGenerator(size_t nbSymbols,
         myNegDst = spacing - (nbCarriers / 2);
         myNegSrc = (nbCarriers + 1) / 2;
         myNegSize = nbCarriers / 2;
-    } else {
+    }
+    else {
         myPosDst = (nbCarriers & 1 ? 0 : 1);
         myPosSrc = nbCarriers / 2;
         myPosSize = (nbCarriers + 1) / 2;
@@ -77,8 +93,25 @@ OfdmGenerator::OfdmGenerator(size_t nbSymbols,
     PDEBUG("  myZeroDst: %u\n", myZeroDst);
     PDEBUG("  myZeroSize: %u\n", myZeroSize);
 
+#if USE_FFTW
+    const int N = mySpacing; // The size of the FFT
+    myFftIn = (FFT_TYPE*)fftwf_malloc(sizeof(FFT_TYPE) * N);
+    myFftOut = (FFT_TYPE*)fftwf_malloc(sizeof(FFT_TYPE) * N);
+    myFftPlan = fftwf_plan_dft_1d(N,
+            myFftIn, myFftOut,
+            FFTW_BACKWARD, FFTW_MEASURE);
+
+    if (sizeof(complexf) != sizeof(FFT_TYPE)) {
+        printf("sizeof(complexf) %zu\n", sizeof(complexf));
+        printf("sizeof(FFT_TYPE) %zu\n", sizeof(FFT_TYPE));
+        throw std::runtime_error(
+                "OfdmGenerator::process complexf size is not FFT_TYPE size!");
+    }
+#else
     myFftPlan = kiss_fft_alloc(mySpacing, 1, NULL, NULL);
     myFftBuffer = (FFT_TYPE*)memalign(16, mySpacing * sizeof(FFT_TYPE));
+#endif
+
 }
 
 
@@ -86,16 +119,32 @@ OfdmGenerator::~OfdmGenerator()
 {
     PDEBUG("OfdmGenerator::~OfdmGenerator() @ %p\n", this);
 
+#if USE_FFTW
+    if (myFftIn) {
+         fftwf_free(myFftIn);
+    }
+
+    if (myFftOut) {
+         fftwf_free(myFftOut);
+    }
+
+    if (myFftPlan) {
+        fftwf_destroy_plan(myFftPlan);
+    }
+
+#else
     if (myFftPlan != NULL) {
         kiss_fft_free(myFftPlan);
     }
+
     if (myFftBuffer != NULL) {
         free(myFftBuffer);
     }
+
     kiss_fft_cleanup();
+#endif
 }
 
-
 int OfdmGenerator::process(Buffer* const dataIn, Buffer* dataOut)
 {
     PDEBUG("OfdmGenerator::process(dataIn: %p, dataOut: %p)\n",
@@ -105,6 +154,7 @@ int OfdmGenerator::process(Buffer* const dataIn, Buffer* dataOut)
 
     FFT_TYPE* in = reinterpret_cast<FFT_TYPE*>(dataIn->getData());
     FFT_TYPE* out = reinterpret_cast<FFT_TYPE*>(dataOut->getData());
+
     size_t sizeIn = dataIn->getLength() / sizeof(complexf);
     size_t sizeOut = dataOut->getLength() / sizeof(complexf);
 
@@ -125,7 +175,27 @@ int OfdmGenerator::process(Buffer* const dataIn, Buffer* dataOut)
                 "OfdmGenerator::process output size not valid!");
     }
 
-#ifdef USE_SIMD
+#if USE_FFTW
+    // No SIMD/no-SIMD distinction, it's too early to optimize anything
+    for (size_t i = 0; i < myNbSymbols; ++i) {
+        myFftIn[0][0] = 0;
+        myFftIn[0][1] = 0;
+
+        bzero(&myFftIn[myZeroDst], myZeroSize * sizeof(FFT_TYPE));
+        memcpy(&myFftIn[myPosDst], &in[myPosSrc],
+                myPosSize * sizeof(FFT_TYPE));
+        memcpy(&myFftIn[myNegDst], &in[myNegSrc],
+                myNegSize * sizeof(FFT_TYPE));
+
+        fftwf_execute(myFftPlan);
+
+        memcpy(out, myFftOut, mySpacing * sizeof(FFT_TYPE));
+
+        in += myNbCarriers;
+        out += mySpacing;
+    }
+#else
+#  ifdef USE_SIMD
     for (size_t i = 0, j = 0; i < sizeIn; ) {
         // Pack 4 fft operations
         typedef struct {
@@ -154,7 +224,8 @@ int OfdmGenerator::process(Buffer* const dataIn, Buffer* dataOut)
                     dataBuffer[myNegDst + l].i[k] = cplxIn[i + myNegSrc + l].imag();
                 }
                 i += myNbCarriers;
-            } else {
+            }
+            else {
                 for (size_t l = 0; l < myNbCarriers; ++l) {
                     dataBuffer[l].r[k] = 0.0f;
                     dataBuffer[l].i[k] = 0.0f;
@@ -174,7 +245,7 @@ int OfdmGenerator::process(Buffer* const dataIn, Buffer* dataOut)
             }
         }
     }
-#else
+#  else
     for (size_t i = 0; i < myNbSymbols; ++i) {
         FFT_REAL(myFftBuffer[0]) = 0;
         FFT_IMAG(myFftBuffer[0]) = 0;
@@ -189,7 +260,9 @@ int OfdmGenerator::process(Buffer* const dataIn, Buffer* dataOut)
         in += myNbCarriers;
         out += mySpacing;
     }
+#  endif
 #endif
 
     return sizeOut;
 }
+
diff --git a/src/OfdmGenerator.h b/src/OfdmGenerator.h
index 5be2d03..ec9f14a 100644
--- a/src/OfdmGenerator.h
+++ b/src/OfdmGenerator.h
@@ -1,6 +1,11 @@
 /*
    Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010, 2011 Her Majesty
    the Queen in Right of Canada (Communications Research Center Canada)
+
+   Copyright (C) 2014
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://opendigitalradio.org
  */
 /*
    This file is part of ODR-DabMod.
@@ -28,10 +33,14 @@
 
 #include "porting.h"
 #include "ModCodec.h"
-#include "kiss_fftsimd.h"
 
+#if USE_FFTW
+#  include "fftw3.h"
+#else
+#  include "kiss_fftsimd.h"
+#  include <kiss_fft.h>
+#endif
 
-#include <kiss_fft.h>
 #include <sys/types.h>
 
 
@@ -48,8 +57,13 @@ public:
     const char* name() { return "OfdmGenerator"; }
 
 protected:
+#if USE_FFTW
+    fftwf_plan myFftPlan;
+    fftwf_complex *myFftIn, *myFftOut;
+#else
     FFT_PLAN myFftPlan;
     FFT_TYPE *myFftBuffer;
+#endif
     size_t myNbSymbols;
     size_t myNbCarriers;
     size_t mySpacing;
@@ -63,5 +77,5 @@ protected:
     unsigned myZeroSize;
 };
 
-
 #endif // OFDM_GENERATOR_H
+
diff --git a/src/OutputUHD.cpp b/src/OutputUHD.cpp
index 3d8eea6..8063e75 100644
--- a/src/OutputUHD.cpp
+++ b/src/OutputUHD.cpp
@@ -25,6 +25,9 @@
  */
 
 #include "OutputUHD.h"
+
+#ifdef HAVE_OUTPUT_UHD
+
 #include "PcDebug.h"
 #include "Log.h"
 #include "RemoteControl.h"
@@ -652,3 +655,4 @@ const string OutputUHD::get_parameter(const string& parameter) const
     return ss.str();
 }
 
+#endif // HAVE_OUTPUT_UHD
diff --git a/src/OutputUHD.h b/src/OutputUHD.h
index 3a047bf..a2ffb7d 100644
--- a/src/OutputUHD.h
+++ b/src/OutputUHD.h
@@ -42,6 +42,8 @@ DESCRIPTION:
 #   include <config.h>
 #endif
 
+#ifdef HAVE_OUTPUT_UHD
+
 #include <uhd/utils/thread_priority.hpp>
 #include <uhd/utils/safe_main.hpp>
 #include <uhd/usrp/multi_usrp.hpp>
@@ -166,7 +168,7 @@ struct OutputUHDConfig {
     long masterClockRate;
     unsigned sampleRate;
     double frequency;
-    int txgain;
+    double txgain;
     bool enableSync;
     bool muteNoTimestamps;
 
@@ -230,6 +232,7 @@ class OutputUHD: public ModOutput, public RemoteControllable {
         size_t lastLen;
 };
 
+#endif // HAVE_OUTPUT_UHD
 
 #endif // OUTPUT_UHD_H
 
diff --git a/src/OutputZeroMQ.cpp b/src/OutputZeroMQ.cpp
new file mode 100644
index 0000000..0e759dd
--- /dev/null
+++ b/src/OutputZeroMQ.cpp
@@ -0,0 +1,67 @@
+/*
+   Copyright (C) 2007, 2008, 2009, 2010, 2011 Her Majesty the Queen in
+   Right of Canada (Communications Research Center Canada)
+
+   Copyright (C) 2014
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://opendigitalradio.org
+ */
+/*
+   This file is part of ODR-DabMod.
+
+   ODR-DabMod is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as
+   published by the Free Software Foundation, either version 3 of the
+   License, or (at your option) any later version.
+
+   ODR-DabMod is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with ODR-DabMod.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "OutputZeroMQ.h"
+#include "PcDebug.h"
+#include <stdexcept>
+#include <string.h>
+#include <sstream>
+
+#if defined(HAVE_OUTPUT_ZEROMQ)
+
+OutputZeroMQ::OutputZeroMQ(std::string endpoint, Buffer* dataOut)
+    : ModOutput(ModFormat(1), ModFormat(0)),
+    m_zmq_context(1),
+    m_zmq_pub_sock(m_zmq_context, ZMQ_PUB),
+    m_endpoint(endpoint)
+{
+    PDEBUG("OutputZeroMQ::OutputZeroMQ(%p) @ %p\n", dataOut, this);
+
+    std::stringstream ss;
+    ss << "OutputZeroMQ(" << m_endpoint << ")";
+    m_name = ss.str();
+
+    m_zmq_pub_sock.bind(m_endpoint.c_str());
+}
+
+OutputZeroMQ::~OutputZeroMQ()
+{
+    PDEBUG("OutputZeroMQ::~OutputZeroMQ() @ %p\n", this);
+}
+
+int OutputZeroMQ::process(Buffer* dataIn, Buffer* dataOut)
+{
+    PDEBUG("OutputZeroMQ::process"
+            "(dataIn: %p, dataOut: %p)\n",
+            dataIn, dataOut);
+
+    m_zmq_pub_sock.send(dataIn->getData(), dataIn->getLength());
+
+    return dataIn->getLength();
+}
+
+#endif // HAVE_OUTPUT_ZEROMQ_H
+
diff --git a/src/OutputZeroMQ.h b/src/OutputZeroMQ.h
new file mode 100644
index 0000000..1c48fe7
--- /dev/null
+++ b/src/OutputZeroMQ.h
@@ -0,0 +1,60 @@
+/*
+   Copyright (C) 2007, 2008, 2009, 2010, 2011 Her Majesty the Queen in
+   Right of Canada (Communications Research Center Canada)
+
+   Copyright (C) 2014
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://opendigitalradio.org
+ */
+/*
+   This file is part of ODR-DabMod.
+
+   ODR-DabMod is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as
+   published by the Free Software Foundation, either version 3 of the
+   License, or (at your option) any later version.
+
+   ODR-DabMod is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with ODR-DabMod.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef OUTPUT_ZEROMQ_H
+#define OUTPUT_ZEROMQ_H
+
+#ifdef HAVE_CONFIG_H
+#   include "config.h"
+#endif
+
+#if defined(HAVE_OUTPUT_ZEROMQ)
+
+#include "ModOutput.h"
+#include "zmq.hpp"
+
+class OutputZeroMQ : public ModOutput
+{
+    public:
+        OutputZeroMQ(std::string endpoint, Buffer* dataOut = NULL);
+        virtual ~OutputZeroMQ();
+        virtual int process(Buffer* dataIn, Buffer* dataOut);
+        const char* name() { return m_name.c_str(); }
+
+    protected:
+        zmq::context_t m_zmq_context; // handle for the zmq context
+        zmq::socket_t m_zmq_pub_sock; // handle for the zmq publisher socket
+
+        std::string m_endpoint;       // On which port to listen: e.g.
+                                      // tcp://*:58300
+
+        std::string m_name;
+};
+
+#endif // HAVE_OUTPUT_ZEROMQ_H
+
+#endif // OUTPUT_ZEROMQ_H
+
diff --git a/src/Resampler.cpp b/src/Resampler.cpp
index 334be99..cda4ff4 100644
--- a/src/Resampler.cpp
+++ b/src/Resampler.cpp
@@ -1,6 +1,11 @@
 /*
    Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010, 2011 Her Majesty
    the Queen in Right of Canada (Communications Research Center Canada)
+
+   Copyright (C) 2014
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://opendigitalradio.org
  */
 /*
    This file is part of ODR-DabMod.
@@ -22,17 +27,16 @@
 #include "Resampler.h"
 #include "PcDebug.h"
 
-
-#if HAVE_DECL__MM_MALLOC
-#   include <mm_malloc.h>
-#else
-#   define memalign(a, b)   malloc(b)
-#endif
+#include <malloc.h>
 #include <sys/types.h>
 #include <string.h>
 #include <stdexcept>
 #include <assert.h>
 
+#if USE_FFTW
+#  define FFT_REAL(x) x[0]
+#  define FFT_IMAG(x) x[1]
+#endif
 
 unsigned gcd(unsigned a, unsigned b)
 {
@@ -59,6 +63,9 @@ Resampler::Resampler(size_t inputRate, size_t outputRate, size_t resolution) :
 {
     PDEBUG("Resampler::Resampler(%zu, %zu) @ %p\n", inputRate, outputRate, this);
 
+#if USE_FFTW
+    fprintf(stderr, "This software uses the FFTW library.\n\n");
+#else
     fprintf(stderr, "This software uses KISS FFT.\n\n");
     fprintf(stderr, "Copyright (c) 2003-2004 Mark Borgerding\n"
             "\n"
@@ -92,6 +99,7 @@ Resampler::Resampler(size_t inputRate, size_t outputRate, size_t resolution) :
             "OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY "
             "OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE "
             "POSSIBILITY OF SUCH DAMAGE.\n");
+#endif
 
     size_t divisor = gcd(inputRate, outputRate);
     L = outputRate / divisor;
@@ -119,6 +127,22 @@ Resampler::Resampler(size_t inputRate, size_t outputRate, size_t resolution) :
         PDEBUG("Window[%zu] = %f\n", i, myWindow[i]);
     }
 
+#if USE_FFTW
+    myFftIn = (FFT_TYPE*)fftwf_malloc(sizeof(FFT_TYPE) * myFftSizeIn);
+    myFront = (FFT_TYPE*)fftwf_malloc(sizeof(FFT_TYPE) * myFftSizeIn);
+    myFftPlan1 = fftwf_plan_dft_1d(myFftSizeIn,
+            myFftIn, myFront,
+            FFTW_FORWARD, FFTW_MEASURE);
+
+    myBack = (FFT_TYPE*)fftwf_malloc(sizeof(FFT_TYPE) * myFftSizeOut);
+    myFftOut = (FFT_TYPE*)fftwf_malloc(sizeof(FFT_TYPE) * myFftSizeOut);
+    myFftPlan2 = fftwf_plan_dft_1d(myFftSizeOut,
+            myBack, myFftOut,
+            FFTW_BACKWARD, FFTW_MEASURE);
+
+    myBufferIn = (complexf*)fftwf_malloc(sizeof(FFT_TYPE) * myFftSizeIn / 2);
+    myBufferOut = (complexf*)fftwf_malloc(sizeof(FFT_TYPE) * myFftSizeOut / 2);
+#else
     myFftIn = (FFT_TYPE*)memalign(16, myFftSizeIn * sizeof(FFT_TYPE));
     myFftOut = (FFT_TYPE*)memalign(16, myFftSizeOut * sizeof(FFT_TYPE));
     myBufferIn = (complexf*)memalign(16, myFftSizeIn / 2 * sizeof(FFT_TYPE));
@@ -127,6 +151,7 @@ Resampler::Resampler(size_t inputRate, size_t outputRate, size_t resolution) :
     myBack = (FFT_TYPE*)memalign(16, myFftSizeOut * sizeof(FFT_TYPE));
     myFftPlan1 = kiss_fft_alloc(myFftSizeIn, 0, NULL, NULL);
     myFftPlan2 = kiss_fft_alloc(myFftSizeOut, 1, NULL, NULL);
+#endif
 
     memset(myBufferIn, 0, myFftSizeIn / 2 * sizeof(FFT_TYPE));
     memset(myBufferOut, 0, myFftSizeOut / 2 * sizeof(FFT_TYPE));
@@ -137,34 +162,30 @@ Resampler::~Resampler()
 {
     PDEBUG("Resampler::~Resampler() @ %p\n", this);
 
-    if (myFftPlan1 != NULL) {
-        free(myFftPlan1);
-    }
-    if (myFftPlan2 != NULL) {
-        free(myFftPlan2);
-    }
-    if (myFftIn != NULL) {
-        free(myFftIn);
-    }
-    if (myFftOut != NULL) {
-        free(myFftOut);
-    }
-    if (myBufferIn != NULL) {
-        free(myBufferIn);
-    }
-    if (myBufferOut != NULL) {
-        free(myBufferOut);
-    }
-    if (myFront != NULL) {
-        free(myFront);
-    }
-    if (myBack != NULL) {
-        free(myBack);
-    }
-    if (myWindow != NULL) {
-        free(myWindow);
-    }
+#if USE_FFTW
+    if (myFftPlan1 != NULL) { fftwf_free(myFftPlan1); }
+    if (myFftPlan2 != NULL) { fftwf_free(myFftPlan2); }
+    if (myFftIn != NULL) { fftwf_free(myFftIn); }
+    if (myFftOut != NULL) { fftwf_free(myFftOut); }
+    if (myBufferIn != NULL) { fftwf_free(myBufferIn); }
+    if (myBufferOut != NULL) { fftwf_free(myBufferOut); }
+    if (myFront != NULL) { fftwf_free(myFront); }
+    if (myBack != NULL) { fftwf_free(myBack); }
+    if (myWindow != NULL) { fftwf_free(myWindow); }
+    fftwf_destroy_plan(myFftPlan1);
+    fftwf_destroy_plan(myFftPlan2);
+#else
+    if (myFftPlan1 != NULL) { free(myFftPlan1); }
+    if (myFftPlan2 != NULL) { free(myFftPlan2); }
+    if (myFftIn != NULL) { free(myFftIn); }
+    if (myFftOut != NULL) { free(myFftOut); }
+    if (myBufferIn != NULL) { free(myBufferIn); }
+    if (myBufferOut != NULL) { free(myBufferOut); }
+    if (myFront != NULL) { free(myFront); }
+    if (myBack != NULL) { free(myBack); }
+    if (myWindow != NULL) { free(myWindow); }
     kiss_fft_cleanup();
+#endif
 }
 
 
@@ -179,7 +200,7 @@ int Resampler::process(Buffer* const dataIn, Buffer* dataOut)
     FFT_TYPE* out = reinterpret_cast<FFT_TYPE*>(dataOut->getData());
     size_t sizeIn = dataIn->getLength() / sizeof(complexf);
 
-#ifdef USE_SIMD
+#if defined(USE_SIMD) && !USE_FFTW
     size_t sizeOut = dataOut->getLength() / sizeof(complexf);
 
     typedef struct {
@@ -263,7 +284,9 @@ int Resampler::process(Buffer* const dataIn, Buffer* dataOut)
             j += myFftSizeOut / 2;
         }
     }
-#else
+#endif
+
+#if USE_FFTW || (!defined(USE_SIMD))
     for (size_t i = 0, j = 0; i < sizeIn; i += myFftSizeIn / 2, j += myFftSizeOut / 2) {
         memcpy(myFftIn, myBufferIn, myFftSizeIn / 2 * sizeof(FFT_TYPE));
         memcpy(myFftIn + (myFftSizeIn / 2), in + i, myFftSizeIn / 2 * sizeof(FFT_TYPE));
@@ -273,7 +296,11 @@ int Resampler::process(Buffer* const dataIn, Buffer* dataOut)
             FFT_IMAG(myFftIn[k]) *= myWindow[k];
         }
 
+#if USE_FFTW
+        fftwf_execute(myFftPlan1);
+#else
         kiss_fft(myFftPlan1, myFftIn, myFront);
+#endif
 
         if (myFftSizeOut > myFftSizeIn) {
             memset(myBack, 0, myFftSizeOut * sizeof(FFT_TYPE));
@@ -304,7 +331,11 @@ int Resampler::process(Buffer* const dataIn, Buffer* dataOut)
             FFT_IMAG(myBack[k]) *= myFactor;
         }
 
+#if USE_FFTW
+        fftwf_execute(myFftPlan2);
+#else
         kiss_fft(myFftPlan2, myBack, myFftOut);
+#endif
 
         for (size_t k = 0; k < myFftSizeOut / 2; ++k) {
             FFT_REAL(out[j + k]) = myBufferOut[k].real() + FFT_REAL(myFftOut[k]);
@@ -316,3 +347,4 @@ int Resampler::process(Buffer* const dataIn, Buffer* dataOut)
 
     return 1;
 }
+
diff --git a/src/Resampler.h b/src/Resampler.h
index a19b14e..392d0a6 100644
--- a/src/Resampler.h
+++ b/src/Resampler.h
@@ -1,6 +1,11 @@
 /*
    Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010, 2011 Her Majesty
    the Queen in Right of Canada (Communications Research Center Canada)
+
+   Copyright (C) 2014
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://opendigitalradio.org
  */
 /*
    This file is part of ODR-DabMod.
@@ -28,12 +33,19 @@
 
 #include "porting.h"
 #include "ModCodec.h"
-#include "kiss_fftsimd.h"
+#if USE_FFTW
+#  include <sys/types.h>
+#  include <fftw3.h>
 
+#  define FFT_TYPE fftwf_complex
+#  define FFT_PLAN fftwf_plan
 
-#include <sys/types.h>
-#include <kiss_fft.h>
-#include <tools/kiss_fftr.h>
+#else
+#  include "kiss_fftsimd.h"
+#  include <sys/types.h>
+#  include <kiss_fft.h>
+#  include <tools/kiss_fftr.h>
+#endif
 #include <complex>
 typedef std::complex<float> complexf;
 
@@ -68,5 +80,5 @@ protected:
     float myFactor;
 };
 
-
 #endif // RESAMPLER_H
+
diff --git a/src/kiss_fftsimd.h b/src/kiss_fftsimd.h
index 6d38dc7..90ee435 100644
--- a/src/kiss_fftsimd.h
+++ b/src/kiss_fftsimd.h
@@ -36,14 +36,6 @@
 #define FFT_IMAG(a) (a).i
 
 
-#ifdef __SSE__
-#include <xmmintrin.h>
-union __u128 {
-    __m128 m;
-    float f[4];
-};
-#endif
-
 
 #ifdef USE_SIMD