From 4cb08b46d89224de85da584bef5f685f7c2ba321 Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Sat, 30 Nov 2024 08:56:28 +0100 Subject: README: clarify the binary is for armhf --- README.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'README.md') diff --git a/README.md b/README.md index 45152d9..cd1430d 100644 --- a/README.md +++ b/README.md @@ -12,9 +12,12 @@ This project contains a web user interface for controlling a ## Installation +A binary is available, compiled for armhf (32-bit). If you want to run an aarch64 (64-bit) OS, please compile +cats-radio-node yourself. Instructions below. + To get cats-radio-node running on your raspberry pi -1. Prepare an SD card with latest Raspberry Pi OS, and boot your pi with it +1. Prepare an SD card with latest 32-bit (armhf) Raspberry Pi OS, and boot your pi with it 1. using `raspi-config`, enable the SPI Interface 1. `mkdir cats-radio-node` and `cd cats-radio-node` 1. `wget https://mpb.li/pv/cats-radio-node-20240128.tar.gz` -- cgit v1.2.3