/* ------------------------------------------------------------------
 * Copyright (C) 2017 AVT GmbH - Fabien Vercasson
 * Copyright (C) 2019 Matthias P. Braendli
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
 * express or implied.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 * -------------------------------------------------------------------
 */

#include "AVTInput.h"
#include <cstring>
#include <cstdio>
#include <stdint.h>
#include <limits.h>
#include <algorithm>


//#define PRINTF(fmt, A...)   fprintf(stderr, fmt, ##A)
#define PRINTF(x ...)
#define INFO(fmt, A...)   fprintf(stderr, "AVT: " fmt, ##A)
//#define DEBUG(fmt, A...)   fprintf(stderr, "AVT: " fmt, ##A)
#define DEBUG(X...)
#define ERROR(fmt, A...)   fprintf(stderr, "AVT: ERROR " fmt, ##A)

#define MAX_AVT_FRAME_SIZE  (1500)  /* Max AVT MTU = 1472 */

#define MAX_PAD_FRAME_QUEUE_SIZE  (6)

// ETSI EN 300 797 V1.2.1 ch 8.2.1.2
uint8_t STI_FSync0[3] = { 0x1F, 0x90, 0xCA };
uint8_t STI_FSync1[3] = { 0xE0, 0x6F, 0x35 };

static uint32_t unpack2(const uint8_t* buf)
{
    return (buf[0] << 8) | buf[1];
}

AVTInput::AVTInput(const std::string& input_uri,
        const std::string& output_uri,
        uint32_t pad_port,
        size_t jitterBufferSize) :
    _input_uri(input_uri),
    _output_uri(output_uri),
    _pad_port(pad_port),
    _jitterBufferSize(jitterBufferSize),

    _output_packet(2048),
    _pad_packet(2048),
    _ordered(5000, _jitterBufferSize),
    _lastInfoFrameType(_typeCantExtract)
{ }

int AVTInput::prepare(void)
{
    INFO("Open input socket\n");
    int ret = _openSocketSrv(&_input_socket, _input_uri.c_str());

    if (ret == 0 && !_output_uri.empty()) {
        INFO("Open output socket\n");
        ret = _openSocketCli();
    }

    if (ret == 0 && _pad_port > 0) {
        INFO("Open PAD Port %d\n", _pad_port);
        char uri[50];
        sprintf(uri, "udp://:%d", _pad_port);
        ret = _openSocketSrv(&_input_pad_socket, uri);
        _purgeMessages();
    }

    return ret;
}

int AVTInput::setDabPlusParameters(int bitrate, int channels, int sample_rate, bool sbr, bool ps)
{
    int ret = 0;

    _subChannelIndex = bitrate / 8;
    _bitRate = bitrate * 1000;
    _dab24msFrameSize = bitrate * 3;
    if (_subChannelIndex * 8 != bitrate || _subChannelIndex < 1 || _subChannelIndex > 24) {
        ERROR("Bad bitrate for DAB+ (8..192)");
        return 1;
    }

    if (sample_rate != 48000 && sample_rate != 32000) {
        ERROR("Bad sample rate for DAB+ (32000,48000)");
        return 1;
    }
    _dac = sample_rate == 48000 ? AVT_DAC_48 : AVT_DAC_32;

    if (channels != 1 && channels != 2) {
        ERROR("Bad channel number for DAB+ (1,2)");
        return 1;
    }
    _audioMode =
        channels == 1
            ? (sbr ? AVT_Mono_SBR : AVT_Mono)
            : ( ps ? AVT_Stereo_SBR_PS : sbr ? AVT_Stereo_SBR : AVT_Stereo );

    _ordered = OrderedQueue(5000, _jitterBufferSize);

    _currentFrame.clear();
    _currentFrame.resize(_subChannelIndex*8*5*3);

    _sendCtrlMessage();

    return ret;
}

bool AVTInput::_parseURI(const char* uri, std::string& address, long& port)
{
    // Skip the udp:// part if it is present
    if (strncmp(uri, "udp://", 6) == 0) {
        address = uri + 6;
    }
    else {
        address = uri;
    }

    size_t pos = address.find(':');
    if (pos == std::string::npos) {
        fprintf(stderr,
                "\"%s\" is an invalid format for udp address: "
                "should be [udp://][address]:port - > aborting\n", uri);
        return false;
    }

    port = strtol(address.c_str()+pos+1, (char **)NULL, 10);
    if ((port == LONG_MIN) || (port == LONG_MAX)) {
        fprintf(stderr,
                "can't convert port number in udp address %s\n",
                uri);
        return false;
    }

    if ((port <= 0) || (port >= 65536)) {
        fprintf(stderr, "can't use port number %ld in udp address\n", port);
        return false;
    }
    address.resize(pos);

    DEBUG("_parseURI <%s> -> <%s> : %ld\n", uri, address.c_str(), port);

    return true;
}

int AVTInput::_openSocketSrv(Socket::UDPSocket* socket, const char* uri)
{
    int returnCode = -1;

    std::string address;
    long port;

    if (_parseURI(uri, address, port)) {
        returnCode = 0;
        socket->reinit(port);

        if (!address.empty()) {
            socket->joinGroup(address.c_str());
        }

        socket->setBlocking(false);
    }

    return returnCode;
}

/* ------------------------------------------------------------------
 * From ODR-dabMux DabOutputUdp::Open
 */
int AVTInput::_openSocketCli()
{
    std::string address;
    long port;

    if (!_parseURI(_output_uri.c_str(), address, port)) {
        return -1;
    }

    _output_packet.address.resolveUdpDestination(address.c_str(), port);
    return 0;
}

bool AVTInput::_isSTI(const uint8_t* buf)
{
    return  (memcmp(buf+1, STI_FSync0, sizeof(STI_FSync0)) == 0) ||
            (memcmp(buf+1, STI_FSync1, sizeof(STI_FSync1)) == 0);
}

const uint8_t* AVTInput::_findDABFrameFromUDP(const uint8_t* buf, size_t size,
                                    int32_t& frameNumber, size_t& dataSize)
{
    const uint8_t* data = NULL;
    uint32_t index = 0;

    bool error = !_isSTI(buf+index);
    bool rtp = false;

    // RTP Header is optionnal, STI is mandatory
    if (error) {
        // Assuming RTP header
        if (size-index >= 12) {
            uint32_t version = (buf[index] & 0xC0) >> 6;
            uint32_t payloadType = (buf[index+1] & 0x7F);
            if (version == 2 && payloadType == 34) {
#if 0
                // If one wants to decode the RTP timestamp, here is some
                // example code. The AVT generates a timestamp which starts
                // at device startup, and is not useful for timing. Proper
                // frame ordering is guaranteed with the DFCT below.
                const uint32_t timestamp =
                    (buf[index+4] << 24) |
                    (buf[index+5] << 16) |
                    (buf[index+6] << 8) |
                    buf[index+7];

                using namespace std::chrono;
                const auto now = steady_clock::now().time_since_epoch();

                const auto t1 = timestamp / 90 / 24;
                const auto t2 = duration_cast<milliseconds>(now).count() / 24;

                fprintf(stderr, "RTP TS=%d vs %lld delta %lld\n", t1, t2, t2-t1);
#endif

                index += 12; // RTP Header length
                error = !_isSTI(buf+index);
                rtp = true;
            }
        }
    }

    if (!error) {
        index += 4;
        //uint32_t DFS = unpack2(buf+index);
        index += 2;
        //uint32_t CFS = unpack2(buf+index);
        index += 2;

        // FC
        index += 5;
        uint32_t DFCTL = buf[index];
        index += 1;
        uint32_t DFCTH = buf[index] >> 3;
        uint32_t NST   = unpack2(buf+index) & 0x7FF; // 11 bits
        index += 2;

        if (NST >= 1) {
            // Take the first stream even if NST > 1
            uint32_t STL = unpack2(buf+index) & 0x1FFF; // 13 bits
            uint32_t CRCSTF = buf[index+3] & 0x80 >> 7; // 7th bit
            index += NST*4+4;

            data = buf+index;
            dataSize = STL - 2*CRCSTF;
            frameNumber = DFCTH*250 + DFCTL;

            _info(rtp?_typeSTIRTP:_typeSTI, dataSize);
        } else error = true;
    }

    if( error ) ERROR("Nothing detected\n");

    return data;
}


/* ------------------------------------------------------------------
 * Set AAC Encoder Parameter format:
 * Flag             : 1 Byte  : 0xFD
 * Command code     : 1 Byte  : 0x07
 * SubChannelIndex  : 1 Byte  : DataRate / 8000
 * AAC Encoder Mode : 1 Byte  :
 *                       * 0 = Mono
 *                       * 1 = Mono + SBR
 *                       * 2 = Stereo
 *                       * 3 = Stereo + SBR
 *                       * 4 = Stereo + SBR + PS
 * DAC Flag         : 1 Byte  : 0 = 32kHz, 1 = 48kHz
 * Mono mode        : 1 Byte  :
 *                       * 0 = ( Left + Right ) / 2
 *                       * 1 = Left
 *                       * 2 = Right
 */
void AVTInput::_sendCtrlMessage()
{
    if (!_output_uri.empty()) {
        std::vector<uint8_t> buf({ 0xFD, 0x07,
                static_cast<uint8_t>(_subChannelIndex),
                static_cast<uint8_t>(_audioMode),
                static_cast<uint8_t>(_dac),
                static_cast<uint8_t>(_monoMode)});

        _output_packet.buffer = buf;
        _output_socket.send(_output_packet);

        INFO("Send control packet to encoder\n");
    }
}

/* ------------------------------------------------------------------
 * PAD Provision Message format:
 * Flag         : 1 Byte  : 0xFD
 * Command code : 1 Byte  : 0x18
 * Size         : 1 Byte  : Size of data (including AD header)
 * AD Header    : 1 Byte  : 0xAD
 *              : 1 Byte  : Size of pad data
 * Pad datas    : X Bytes : In natural order, strating with FPAD bytes
 */
void AVTInput::_sendPADFrame()
{
    if (_padFrameQueue.size() > 0) {
        std::vector<uint8_t> frame(move(_padFrameQueue.front()));
        _padFrameQueue.pop();

        std::vector<uint8_t> buf({ 0xFD, 0x18,
                static_cast<uint8_t>(frame.size()+2),
                0xAD,
                static_cast<uint8_t>(frame.size())});

        // Always keep the same packet, as it contains the destination address.
        // This function only gets called from _interpretMessage(), which
        // only gets called after a successful packet reception.
        _pad_packet.buffer = move(buf);
        copy(frame.begin(), frame.end(), back_inserter(_pad_packet.buffer));
        _input_pad_socket.send(_pad_packet);
    }
}

/* ------------------------------------------------------------------
 * Message format:
 * Flag         : 1 Byte : 0xFD
 * Command code : 1 Byte
 *                  * 0x17 = Request for 1 PAD Frame
 */
void AVTInput::_interpretMessage(const uint8_t *data, size_t size)
{
    if (size >= 2) {
        if (data[0] == 0xFD) {
            switch (data[1]) {
                case 0x17:
                    _sendPADFrame();
                    break;
            }
        }
    }
}

bool AVTInput::_checkMessage()
{
    _pad_packet = _input_pad_socket.receive(2048);
    if (_pad_packet.buffer.empty()) {
        return false;
    }

    _interpretMessage(_pad_packet.buffer.data(), _pad_packet.buffer.size());

    return true;
}

void AVTInput::_purgeMessages()
{
    int nb = 0;
    do {
        _pad_packet = _input_pad_socket.receive(2048);
        nb++;
    } while (not _pad_packet.buffer.empty());

    if (nb>0) DEBUG("%d messages purged\n", nb);
}


bool AVTInput::_readFrame()
{
    int32_t frameNumber;
    const uint8_t* dataPtr = NULL;
    size_t dataSize = 0;

    auto packet = _input_socket.receive(MAX_AVT_FRAME_SIZE);
    const timestamp_t ts = std::chrono::system_clock::now();
    const size_t readBytes = packet.buffer.size();

    if (readBytes > 0) {
        const uint8_t *readBuf = packet.buffer.data();

        if (readBytes > _dab24msFrameSize) {
            // Extract frame data and frame number from buf
            dataPtr = _findDABFrameFromUDP(readBuf, readBytes, frameNumber, dataSize);
        }

        if (dataPtr) {
            if (dataSize == _dab24msFrameSize) {
                _ordered.push(frameNumber, dataPtr, dataSize, ts);
            }
            else ERROR("Wrong frame size from encoder %zu != %zu\n", dataSize, _dab24msFrameSize);
        }
        else {
            _info(_typeCantExtract, 0);
        }
    }

    return readBytes > 0;
}

size_t AVTInput::getNextFrame(std::vector<uint8_t> &buf, std::chrono::system_clock::time_point& ts)
{
    //printf("A: _padFrameQueue size=%zu\n", _padFrameQueue.size());

    // Read all messages from encoder (in priority)
    // Read all available frames from input socket
    while (_checkMessage() || _readFrame() );

    //printf("B: _padFrameQueue size=%zu\n", _padFrameQueue.size());

    // Assemble next frame, ensuring it is composed of five parts with
    // indexes that are contiguous, and where index%5==0 for the first part.
    int32_t returnedIndex = -1;

    while (_nbFrames < 5) {
        const auto queue_data = _ordered.pop(&returnedIndex);
        const auto& part = queue_data.buf;
        if (part.empty()) {
            break;
        }

        while (_checkMessage()) {};


        if (not _frameAligned) {
            if (returnedIndex % 5 == 0) {
                _frameAligned = true;
                _frameZeroTimestamp = queue_data.capture_timestamp;

                memcpy(_currentFrame.data() + _currentFrameSize, part.data(), part.size());
                _currentFrameSize += part.size();
                _nbFrames++;
            }
        }
        else {
            if (returnedIndex % 5 == _nbFrames) {
                memcpy(_currentFrame.data() + _currentFrameSize, part.data(), part.size());
                _currentFrameSize += part.size();
                _nbFrames++;

                // UDP packets arrive with jitter, we intentionally only consider
                // their timestamp after a discontinuity.
                _frameZeroTimestamp += std::chrono::milliseconds(24);
            }
            else {
                _nbFrames = 0;
                _currentFrameSize = 0;
                _frameAligned = false;

                fprintf(stderr, "Frame alignment reset\n");
            }
        }
    }

    size_t nbBytes = 0;
    if (_nbFrames == 5 && _currentFrameSize <= buf.size()) {
        memcpy(&buf[0], _currentFrame.data(), _currentFrameSize);
        nbBytes = _currentFrameSize;
        _currentFrameSize = 0;
        _nbFrames = 0;
        ts = _frameZeroTimestamp;
    }

    //printf("C: _padFrameQueue size=%zu\n", _padFrameQueue.size());

    return nbBytes;
}

void AVTInput::pushPADFrame(const uint8_t* buf, size_t size)
{
    if (_pad_port == 0) {
        return;
    }

    if (size > 0) {
        std::vector<uint8_t> frame(size);
        std::reverse_copy(buf, buf + size, frame.begin());
        _padFrameQueue.push(frame);
    }
}

bool AVTInput::padQueueFull()
{
    return _padFrameQueue.size() >= MAX_PAD_FRAME_QUEUE_SIZE;
}

void AVTInput::_info(_frameType type, size_t size)
{
    if (_lastInfoFrameType != type || _lastInfoSize != size) {
        switch (type) {
            case _typeSTI:
                INFO("Extracting from UDP/STI frames of size %zu\n", size);
                break;
            case _typeSTIRTP:
                INFO("Extracting from UDP/RTP/STI frames of size %zu\n", size);
                break;
            case _typeCantExtract:
                ERROR("Can't extract data from encoder frame\n");
                break;
        }
        _lastInfoFrameType = type;
        _lastInfoSize = size;
    }
    if (_lastInfoFrameType != _typeCantExtract) {
        _infoNbFrame++;
        if ( (_infoNbFrame == 100) ||
             (_infoNbFrame < 10000 && _infoNbFrame % 1000 == 0) ||
             (_infoNbFrame < 100000 && _infoNbFrame % 10000 == 0) ||
             (_infoNbFrame % 100000 == 0)
           )
        {
            INFO("%zu 24ms-frames received\n", _infoNbFrame);
        }
    }
}