path: root/README.md

fdk-aac-dabplus Package
=======================

This package contains an DAB+ encoder that uses the standalone library
of the Fraunhofer FDK AAC code from Android, patched for
960-transform to do DAB+ broadcast encoding.

The main tool is the *dabplus-enc* encoder, which can read audio from
a file (raw or wav), from an ALSA source, from JACK or using libVLC,
and encode to a file, a pipe, or to a ZeroMQ output compatible with ODR-DabMux.

The ALSA input supports experimental sound card clock drift compensation, that
can compensate for imprecise sound card clocks.

The JACK input does not automatically connect to anything. The encoder runs
at the rate defined by the system clock, and therefore sound
card clock drift compensation is also used.

The libVLC input allows the encoder to use all inputs supported by VLC, and
therefore also webstreams, and other network sources.

*dabplus-enc* includes support for DAB MOT Slideshow and DLS, contributed by
[CSP](http://rd.csp.it).

To encode DLS and Slideshow data, the *mot-encoder* tool reads images
from a folder and DLS text from a file, and generates the PAD data
for the encoder.

For detailed usage, see the usage screen of the different tools.

More information is available on the
[Opendigitalradio wiki](http://opendigitalradio.org)

How to build
=============

Requirements:

* boost-thread and boost-system
* ImageMagick magickwand (optional, for MOT slideshow)
* The alsa libraries (libasound2)
* Download and install libfec from https://github.com/Opendigitalradio/ka9q-fec
* Download and install ZeroMQ from http://download.zeromq.org/zeromq-4.0.4.tar.gz
* JACK audio connection kit (optional)
* libvlc and vlc for the plugins (optional)

This package:

    git clone https://github.com/mpbraendli/fdk-aac-dabplus.git
    cd fdk-aac-dabplus
    ./bootstrap
    ./configure
    make
    sudo make install

If you want to use the JACK and libVLC input, please use

    ./configure --enable-jack --enable-vlc

* See the possible scenarios below on how to use the tools
* use mot-encoder to encode images into MOT Slideshow


How to use
==========

We assume that you have a ODR-DabMux configured for an ZeroMQ
input on port 9000.

    ALSASRC="default"
    DST="tcp://yourserver:9000"
    BITRATE=64

AAC encoder configuration
-------------------------
By default, when not overridden by the --aaclc, --sbr or --ps options,
the encoder is configured according to bitrate and number of channels.

If only one channel is used, SBR (Spectral-Band Replication, also called
HE-AAC) is enabled up to 64kbps. AAC-LC is used for higher bitrates.

If two channels are used, PS (Parametric Stereo, also called HE-AAC v2)
is enabled up to 48kbps. Between 56kbps and 80kbps, SBR is enabled. 88kbps
and higher are using AAC-LC.

Scenario *ALSA*
---------------
Live Stream from ALSA sound card at 32kHz, with ZMQ output for ODR-DabMux:

    dabplus-enc -d $ALSASRC -c 2 -r 32000 -b $BITRATE -o $DST -l

To enable sound card drift compensation, add the option **-D**:

    dabplus-enc -d $ALSASRC -c 2 -r 32000 -b $BITRATE -o $DST -D -l

You might see **U** and **O** appearing on the terminal. They correspond
to audio underruns and overruns that happen due to the different speeds at which
the audio is captured from the soundcard, and encoded into HE-AACv2.

High occurrence of these will lead to audible artifacts.

Scenario *libVLC input for a webstream*
---------------------------------------
Read a webstream and send it to ODR-DabMux over ZMQ:

    dabplus-enc -v $URL -r 32000 -c 2 -o $DST -l -b $BITRATE

This scenario does not yet support ICY-text extraction for DLS.

Scenario *JACK input*
---------------------
JACK input: Instead of -i (file input) or -d (ALSA input), use -j *name*, where *name* specifies the JACK
name for the encoder:

    dabplus-enc -j myenc -l -b $BITRATE -f raw -o $DST

The samplerate of the JACK server should be 32kHz or 48kHz.

Scenario *local file through snd-aloop*
---------------------------------------
Play some local audio source from a file, with ZMQ output for ODR-DabMux. The problem with
playing a file is that *dabplus-enc* cannot directly be used, because ODR-DabMux
does not back-pressure the encoder, which will therefore encode much faster than realtime.

While this issue is sorted out, the following trick is a very flexible solution: use the
alsa virtual loop soundcard *snd-aloop* in the following way:

    modprobe snd-aloop

This creates a new audio card (usually 'hw:1' but have a look at /proc/asound/card to be sure) that
can then be used for the alsa encoder.

    ./dabplus-enc -d hw:1 -c 2 -r 32000 -b 64 -o $DST -l

Then, you can use any media player that has an alsa output to play whatever source it supports:

    cd your/preferred/music
    mplayer -ao alsa:device=hw=1.1 -srate 32000 -shuffle *

Important: you must specify the correct sample rate on both "sides" of the virtual sound card.


Scenario *sox and pipes*
------------------------
Live Stream encoding and preparing for DAB muxer, with ZMQ output, at 32kHz, using sox.
This illustrates the fifo input over standard input of *dabplus-enc*.

    sox -t alsa $ALSASRC -b 16 -t raw - rate 32k channels 2 | \
    dabplus-enc -r 32000 -l \
    -i - -b $BITRATE -f raw -o $DST -p 53

The -p 53 sets the padlen, compatible with the default mot-encoder setting. mot-encoder needs
to be given the same value for this option.


Scenario *mplayer and fifo*
---------------------------
Live Stream resampling (to 32KHz) and encoding from FIFO and preparing for DAB muxer, with FIFO to odr-dabmux
using mplayer. If there are no data in FIFO, encoder generates silence.

    mplayer -quiet -loop 0 -af resample=32000:nowaveheader,format=s16le,channels=2 -ao pcm:file=/tmp/aac.fifo:fast <FILE/URL> &
    dabplus-enc -l -f raw --fifo-silence -i /tmp/aac.fifo -r 32000 -c 2 -b 72 -o /dev/stdout \
    mbuffer -q -m 10k -P 100 -s 1080 > station1.fifo

*Note*: Do not use /dev/stdout for pcm oputput in mplayer. Mplayer log messages on stdout.

Scenario *wav file for offline processing*
------------------------------------------
Wave file encoding, for non-realtime processing

    dabplus-enc -b $BITRATE -i wave_file.wav -o station1.dabp


Return values
-------------
dabplus-enc returns:

 * 0 if it encoded the whole input file
 * 1 if some options were not understood, or encoder initialisation failed
 * 2 if the silence timeout was reached
 * 3 if the AAC encoder failed
 * 4 it the ZeroMQ send failed
 * 5 if the ALSA input had a fault

Usage of MOT Slideshow and DLS
==============================

*mot-encoder* reads images from the specified folder, and generates the PAD
data for the encoder. This is communicated through a fifo to the encoder. It
also reads DLS from a file, and includes this information in the PAD.

If ImageMagick is available
---------------------------
It can read all file formats supported by ImageMagick, and by default resizes
them to 320x240 pixels, and compresses them as JPEG. If the input file is already
a JPEG file of the correct size, and smaller than 50kB, it is sent without further
compression. If the input file is a PNG that satisfies the same criteria, it is
transmitted as PNG without any recompression.

RAW Format
----------
If ImageMagick is not available, or when enable with the -R option, the images
are not modified, and are transmitted as-is. Use this if you can guarantee that
the generated files are smaller than 50kB and exactly 320x240 pixels.

Supported Encoders
------------------
*dabplus-enc* can insert the PAD data from mot-encoder into the bitstream.
The mp2 encoder [Toolame-DAB](https://github.com/Opendigitalradio/toolame-dab)
can also read *mot-encoder* data.

This is an ongoing development. Make sure you use the same pad length option
for *mot-encoder* and the audio encoder. Only some pad lengths are supported,
please see *mot-encoder*'s help.

Character Sets
--------------
When *mot-encoder* is launched with the default character set options, it assumes
that the DLS text in the file is encoded in UTF-8, and will convert it according to
the DAB standard to the *Complete EBU Latin based repertoire* character set encoding.

If you set the character set encoding to any other setting (except
*Complete EBU Latin based repertoire* which needs no conversion),
*mot-encoder* will abort, as it does not support any other conversion than from
UTF-8 to *Complete EBU Latin based repertoire*.

You can however use the -C option to transmit the untouched DLS text. In this
case, it is your responsibility to ensure the encoding is valid.  For instance,
if your data is already encoded in *Complete EBU Latin based repertoire*, you
must specify both --charset=0 and --raw-dls.

Known Limitations
-----------------
*mot-encoder* encodes slides in a 10 second interval, which is not linked
to the rate at which the encoder reads the PAD data. It also doesn't prioritise
DLS transmission over Slides.

Some receivers did not decode audio anymore between v0.3.0 and v0.5.0, because of
a change implemented to get PAD to work. The change was subsequently reverted in
v0.5.1 because it was deemed essential that audio decoding works on all receivers.
Work to get both functional audio and PAD on all receivers is ongoing.

Version 0.4.0 of the encoder changed the ZeroMQ framing. It will only work with
ODR-DabMux v0.7.0 and later.