/* ----------------------------------------------------------------------------------------------------------- Software License for The Fraunhofer FDK AAC Codec Library for Android © Copyright 1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. All rights reserved. 1. INTRODUCTION The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. This FDK AAC Codec software is intended to be used on a wide variety of Android devices. AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part of the MPEG specifications. Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners individually for the purpose of encoding or decoding bit streams in products that are compliant with the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec software may already be covered under those patent licenses when it is used for those licensed purposes only. Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional applications information and documentation. 2. COPYRIGHT LICENSE Redistribution and use in source and binary forms, with or without modification, are permitted without payment of copyright license fees provided that you satisfy the following conditions: You must retain the complete text of this software license in redistributions of the FDK AAC Codec or your modifications thereto in source code form. You must retain the complete text of this software license in the documentation and/or other materials provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. You must make available free of charge copies of the complete source code of the FDK AAC Codec and your modifications thereto to recipients of copies in binary form. The name of Fraunhofer may not be used to endorse or promote products derived from this library without prior written permission. You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec software or your modifications thereto. Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software and the date of any change. For modified versions of the FDK AAC Codec, the term "Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term "Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." 3. NO PATENT LICENSE NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with respect to this software. You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized by appropriate patent licenses. 4. DISCLAIMER This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, including but not limited to procurement of substitute goods or services; loss of use, data, or profits, or business interruption, however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence), arising in any way out of the use of this software, even if advised of the possibility of such damage. 5. CONTACT INFORMATION Fraunhofer Institute for Integrated Circuits IIS Attention: Audio and Multimedia Departments - FDK AAC LL Am Wolfsmantel 33 91058 Erlangen, Germany www.iis.fraunhofer.de/amm amm-info@iis.fraunhofer.de ----------------------------------------------------------------------------------------------------------- */ /************************** MPEG-4 Transport Decoder *********************** Author(s): Manuel Jander Description: MPEG Transport decoder ******************************************************************************/ #ifndef __TPDEC_LIB_H__ #define __TPDEC_LIB_H__ #include "tp_data.h" #include "FDK_bitstream.h" #define TRANSPORTDEC_INBUF_SIZE ( 8192 ) /*!< Size is in bytes. Set the transport input buffer size carefully and assure that it fulfills the requirements of the supported transport format(s). */ typedef enum { TRANSPORTDEC_OK = 0, /*!< All fine. */ /* Synchronization errors. Wait for new input data and try again. */ tpdec_sync_error_start = 0x100, TRANSPORTDEC_NOT_ENOUGH_BITS, /*!< Out of bits. Provide more bits and try again. */ TRANSPORTDEC_SYNC_ERROR, /*!< No sync was found or sync got lost. Keep trying. */ tpdec_sync_error_end, /* Decode errors. Mostly caused due to bit errors. */ tpdec_decode_error_start = 0x400, TRANSPORTDEC_PARSE_ERROR, /*!< Bitstream data showed inconsistencies (wrong syntax). */ TRANSPORTDEC_UNSUPPORTED_FORMAT, /*!< Unsupported format or feature found in the bitstream data. */ TRANSPORTDEC_CRC_ERROR, /*!< CRC error encountered in bitstream data. */ tpdec_decode_error_end, /* Fatal errors. Stop immediately on one of these errors! */ tpdec_fatal_error_start = 0x200, TRANSPORTDEC_UNKOWN_ERROR, /*!< An unknown error occured. */ TRANSPORTDEC_INVALID_PARAMETER, /*!< An invalid parameter was passed to a function. */ TRANSPORTDEC_NEED_TO_RESTART, /*!< The decoder needs to be restarted, since the requiered configuration change cannot be performed. */ tpdec_fatal_error_end } TRANSPORTDEC_ERROR; /** Macro to identify decode errors. */ #define TPDEC_IS_DECODE_ERROR(err) ( ((err>=tpdec_decode_error_start) && (err<=tpdec_decode_error_end)) ? 1 : 0) /** Macro to identify fatal errors. */ #define TPDEC_IS_FATAL_ERROR(err) ( ((err>=tpdec_fatal_error_start) && (err<=tpdec_fatal_error_end)) ? 1 : 0) /** * \brief Parameter identifiers for transportDec_SetParam() */ typedef enum { TPDEC_PARAM_MINIMIZE_DELAY = 1, /** Delay minimization strategy. 0: none, 1: discard as many frames as possible. */ TPDEC_PARAM_EARLY_CONFIG, /** Enable early config discovery. */ TPDEC_PARAM_IGNORE_BUFFERFULLNESS, /** Ignore buffer fullness. */ TPDEC_PARAM_SET_BITRATE, /** Set average bit rate for bit stream interruption frame misses estimation. */ TPDEC_PARAM_RESET, /** Reset transport decoder instance status. */ TPDEC_PARAM_BURST_PERIOD /** Set data reception burst period in mili seconds. */ } TPDEC_PARAM; /* ISO/IEC 14496-3 4.4.1.1 Table 4.2 Program config element */ #define PC_FSB_CHANNELS_MAX 16 /* Front/Side/Back channels */ #define PC_LFE_CHANNELS_MAX 4 #define PC_ASSOCDATA_MAX 8 #define PC_CCEL_MAX 16 /* CC elements */ #define PC_COMMENTLENGTH 256 /*! \brief Reset Program Config Element. \param pPce Program Config Element structure. \return void */ void CProgramConfig_Reset ( CProgramConfig *pPce ); /*! \brief Initialize Program Config Element. \param pPce Program Config Element structure. \return void */ void CProgramConfig_Init ( CProgramConfig *pPce ); /*! \brief Inquire state of present Program Config Element structure. \param pPce Program Config Element structure. \return 1 if the PCE structure is filled correct, 0 if no valid PCE present. */ int CProgramConfig_IsValid ( const CProgramConfig *pPce ); #ifdef TP_PCE_ENABLE /*! \brief Read Program Config Element. \param pPce Program Config Element structure. \param bs Bitstream buffer to read from. \param alignAnchor Align bitstream to alignAnchor bits after all read operations. \return void */ void CProgramConfig_Read ( CProgramConfig *pPce, HANDLE_FDK_BITSTREAM bs, UINT alignAnchor ); /*! \brief Compare two Program Config Elements. \param pPce1 Pointer to first Program Config Element structure. \param pPce2 Pointer to second Program Config Element structure. \return -1 if PCEs are completely different, 0 if PCEs are completely equal, 1 if PCEs are different but have the same channel config, 2 if PCEs have different channel config but same number of channels. */ int CProgramConfig_Compare ( const CProgramConfig * const pPce1, const CProgramConfig * const pPce2 ); /*! \brief Get a Program Config Element that matches the predefined MPEG-4 channel configurations 1-14. \param pPce Program Config Element structure. \param channelConfig MPEG-4 channel configuration. \return void */ void CProgramConfig_GetDefault ( CProgramConfig *pPce, const UINT channelConfig ); #endif /* TP_PCE_ENABLE */ /** * \brief Lookup and verify a given element. The decoder calls this * method with every new element ID found in the bitstream. * * \param pPce A valid Program config structure. * \param tag Tag of the current element to be looked up. * \param channelIdx The current channel count of the decoder parser. * \param chMapping Array to store the canonical channel mapping indexes. * \param chType Array to store the audio channel type. * \param chIndex Array to store the individual audio channel type index. * \param elMapping Pointer where the canonical element index is stored. * \param elType The element id of the current element to be looked up. * * \return Non-zero if the element belongs to the current program, zero * if it does not. */ int CProgramConfig_LookupElement( CProgramConfig *pPce, UINT channelConfig, const UINT tag, const UINT channelIdx, UCHAR chMapping[], AUDIO_CHANNEL_TYPE chType[], UCHAR chIndex[], UCHAR *elMapping, MP4_ELEMENT_ID elList[], MP4_ELEMENT_ID elType ); /** * \brief Get table of elements in canonical order. * \param pPce A valid program config structure. * \param table An array where the element IDs are stored. * \return Total element count including all SCE, CPE and LFE. */ int CProgramConfig_GetElementTable( const CProgramConfig *pPce, MP4_ELEMENT_ID table[], const INT elListSize ); /** * \brief Initialize a given AudioSpecificConfig structure. * \param pAsc A pointer to an allocated CSAudioSpecificConfig struct. * \return void */ void AudioSpecificConfig_Init(CSAudioSpecificConfig *pAsc); /** * \brief Parse a AudioSpecificConfig from a given bitstream handle. * * \param pAsc A pointer to an allocated CSAudioSpecificConfig struct. * \param hBs Bitstream handle. * \param fExplicitBackwardCompatible Do explicit backward compatibility parsing if set (flag). * \param cb pointer to structure holding callback information * * \return Total element count including all SCE, CPE and LFE. */ TRANSPORTDEC_ERROR AudioSpecificConfig_Parse( CSAudioSpecificConfig *pAsc, HANDLE_FDK_BITSTREAM hBs, int fExplicitBackwardCompatible, CSTpCallBacks *cb ); /* CELP stuff */ enum { MPE = 0, RPE = 1, fs8KHz = 0, fs16KHz = 1 }; /* Defintion of flags that can be passed to transportDecOpen() */ #define TP_FLAG_MPEG4 1 /* Capability flags */ #define CAPF_TPDEC_ADIF 0x00001000 /**< Flag indicating support for ADIF transport format. */ #define CAPF_TPDEC_ADTS 0x00002000 /**< Flag indicating support for ADTS transport format. */ #define CAPF_TPDEC_LOAS 0x00004000 /**< Flag indicating support for LOAS transport format. */ #define CAPF_TPDEC_LATM 0x00008000 /**< Flag indicating support for LATM transport format. */ #define CAPF_TPDEC_RAWPACKETS 0x00010000 /**< Flag indicating support for raw packets transport format. */ typedef struct TRANSPORTDEC *HANDLE_TRANSPORTDEC; /** * \brief Configure Transport Decoder via a binary coded AudioSpecificConfig or StreamMuxConfig. * The previously requested configuration callback will be called as well. The buffer conf * must containt a SMC in case of LOAS/LATM transport format, and an ASC elseways. * * \param hTp Handle of a transport decoder. * \param conf UCHAR buffer of the binary coded config (ASC or SMC). * \param length The length in bytes of the conf buffer. * * \return Error code. */ TRANSPORTDEC_ERROR transportDec_OutOfBandConfig( const HANDLE_TRANSPORTDEC hTp, UCHAR *conf, const UINT length, const UINT layer ); /** * \brief Open Transport medium for reading. * * \param transportDecFmt Format of the transport decoder medium to be accessed. * \param flags Transport decoder flags. Currently only TP_FLAG_MPEG4, which signals a * MPEG4 capable decoder (relevant for ADTS only). * * \return A pointer to a valid and allocated HANDLE_TRANSPORTDEC or a null pointer on failure. */ HANDLE_TRANSPORTDEC transportDec_Open( TRANSPORT_TYPE transportDecFmt, const UINT flags ); /** * \brief Register configuration change callback. * \param hTp Handle of transport decoder. * \param cbUpdateConfig Pointer to a callback function to handle audio config changes. * \param user_data void pointer for user data passed to the callback as first parameter. * \return 0 on success. */ int transportDec_RegisterAscCallback ( HANDLE_TRANSPORTDEC hTp, const cbUpdateConfig_t cbUpdateConfig, void* user_data ); /** * \brief Register SSC parser callback. * \param hTp Handle of transport decoder. * \param cbUpdateConfig Pointer to a callback function to handle SSC parsing. * \param user_data void pointer for user data passed to the callback as first parameter. * \return 0 on success. */ int transportDec_RegisterSscCallback ( HANDLE_TRANSPORTDEC hTp, const cbSsc_t cbSscParse, void* user_data ); /** * \brief Register SBR header parser callback. * \param hTp Handle of transport decoder. * \param cbUpdateConfig Pointer to a callback function to handle SBR header parsing. * \param user_data void pointer for user data passed to the callback as first parameter. * \return 0 on success. */ int transportDec_RegisterSbrCallback( HANDLE_TRANSPORTDEC hTpDec, const cbSbr_t cbSbr, void* user_data); /** * \brief Fill internal input buffer with bitstream data from the external input buffer. * The function only copies such data as long as the decoder-internal input buffer is not full. * So it grabs whatever it can from pBuffer and returns information (bytesValid) so that at a * subsequent call of %transportDec_FillData(), the right position in pBuffer can be determined to * grab the next data. * * \param hTp Handle of transportDec. * \param pBuffer Pointer to external input buffer. * \param bufferSize Size of external input buffer. This argument is required because decoder-internally * we need the information to calculate the offset to pBuffer, where the next * available data is, which is then fed into the decoder-internal buffer (as much * as possible). Our example framework implementation fills the buffer at pBuffer * again, once it contains no available valid bytes anymore (meaning bytesValid equal 0). * \param bytesValid Number of bitstream bytes in the external bitstream buffer that have not yet been * copied into the decoder's internal bitstream buffer by calling this function. * The value is updated according to the amount of newly copied bytes. * \param layer The layer the bitstream belongs to. * \return Error code. */ TRANSPORTDEC_ERROR transportDec_FillData( const HANDLE_TRANSPORTDEC hTp, UCHAR *pBuffer, const UINT bufferSize, UINT *pBytesValid, const INT layer ); /** * \brief Get transportDec bitstream handle. * \param hTp Pointer to a transport decoder handle. * \return HANDLE_FDK_BITSTREAM bitstream handle. */ HANDLE_FDK_BITSTREAM transportDec_GetBitstream ( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); /** * \brief Get transport format. * \param hTp Pointer to a transport decoder handle. * \return The transport format. */ TRANSPORT_TYPE transportDec_GetFormat ( const HANDLE_TRANSPORTDEC hTp ); /** * \brief Get the current buffer fullness value. * * \param hTp Handle of a transport decoder. * * \return Buffer fullness */ INT transportDec_GetBufferFullness( const HANDLE_TRANSPORTDEC hTp ); /** * \brief Close and deallocate transportDec. * \param phTp Pointer to a previously allocated transport decoder handle. * \return void */ void transportDec_Close ( HANDLE_TRANSPORTDEC *phTp ); /** * \brief Read one access unit from the transportDec medium. * \param hTp Handle of transportDec. * \param length On return, this value is overwritten with the actual access unit length in bits. * Set to -1 if length is unknown. * \return Error code. */ TRANSPORTDEC_ERROR transportDec_ReadAccessUnit ( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); /** * \brief Get the remaining amount of bits of the current access unit. The result * can be below zero, meaning that too many bits have been read. * \param hTp Handle of transportDec. * \return amount of remaining bits. */ INT transportDec_GetAuBitsRemaining( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); /** * \brief Get the total amount of bits of the current access unit. * \param hTp Handle of transportDec. * \return amount of total bits. */ INT transportDec_GetAuBitsTotal( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); /** * \brief This function is required to be called when the decoder has finished parsing * one Access Unit for bitstream housekeeping. * \param hTp Transport Handle. * \return Error code. */ TRANSPORTDEC_ERROR transportDec_EndAccessUnit ( const HANDLE_TRANSPORTDEC hTp ); /** * \brief Obtain the amount of missing access units if applicable in case of * a bit stream synchronization error. Each time transportDec_ReadAccessUnit() * returns TRANSPORTDEC_SYNC_ERROR this function can be called to retrieve an estimate * of the amount of missing access units. This works only in case of constant average * bit rate (has to be known) and if the parameter TPDEC_PARAM_SET_BITRATE has been set * accordingly. * \param hTp Transport Handle. * \param pNAccessUnits pointer to a memory location where the estimated lost frame count will be stored into. * \return Error code. */ TRANSPORTDEC_ERROR transportDec_GetMissingAccessUnitCount ( INT *pNAccessUnits, HANDLE_TRANSPORTDEC hTp ); /** * \brief Set a given setting. * \param hTp Transport Handle. * \param param Identifier of the parameter to be changed. * \param value Value for the parameter to be changed. * \return Error code. */ TRANSPORTDEC_ERROR transportDec_SetParam ( const HANDLE_TRANSPORTDEC hTp, const TPDEC_PARAM param, const INT value ); /** * \brief Get number of subframes (for LATM or ADTS) * \param hTp Transport Handle. * \return Number of ADTS/LATM subframes (return 1 for all other transport types). */ UINT transportDec_GetNrOfSubFrames(HANDLE_TRANSPORTDEC hTp); /** * \brief Get info structure of transport decoder library. * \param info A pointer to an allocated LIB_INFO struct. * \return Error code. */ TRANSPORTDEC_ERROR transportDec_GetLibInfo( LIB_INFO *info ); /* ADTS CRC support */ /** * \brief Set current bitstream position as start of a new data region. * \param hTp Transport handle. * \param mBits Size in bits of the data region. Set to 0 if it should not be of a fixed size. * \return Data region ID, which should be used when calling transportDec_CrcEndReg(). */ int transportDec_CrcStartReg ( const HANDLE_TRANSPORTDEC hTp, const INT mBits ); /** * \brief Set end of data region. * \param hTp Transport handle. * \param reg Data region ID, opbtained from transportDec_CrcStartReg(). * \return void */ void transportDec_CrcEndReg ( const HANDLE_TRANSPORTDEC hTp, const INT reg ); /** * \brief Calculate ADTS crc and check if it is correct. The ADTS checksum is held internally. * \param hTp Transport handle. * \return Return TRANSPORTDEC_OK if the CRC is ok, or error if CRC is not correct. */ TRANSPORTDEC_ERROR transportDec_CrcCheck ( const HANDLE_TRANSPORTDEC hTp ); #endif /* #ifndef __TPDEC_LIB_H__ */