From 14c7b800eaa23e9da7c92c7c4df397d0c191f097 Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Sat, 10 Sep 2016 20:15:44 +0200 Subject: Remove FDK-AAC --- libSBRenc/include/sbr_encoder.h | 419 ---------------------------------------- 1 file changed, 419 deletions(-) delete mode 100644 libSBRenc/include/sbr_encoder.h (limited to 'libSBRenc/include/sbr_encoder.h') diff --git a/libSBRenc/include/sbr_encoder.h b/libSBRenc/include/sbr_encoder.h deleted file mode 100644 index 93dc46d..0000000 --- a/libSBRenc/include/sbr_encoder.h +++ /dev/null @@ -1,419 +0,0 @@ - -/* ----------------------------------------------------------------------------------------------------------- -Software License for The Fraunhofer FDK AAC Codec Library for Android - -© Copyright 1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - All rights reserved. - - 1. INTRODUCTION -The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements -the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. -This FDK AAC Codec software is intended to be used on a wide variety of Android devices. - -AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual -audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by -independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part -of the MPEG specifications. - -Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) -may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners -individually for the purpose of encoding or decoding bit streams in products that are compliant with -the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license -these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec -software may already be covered under those patent licenses when it is used for those licensed purposes only. - -Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, -are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional -applications information and documentation. - -2. COPYRIGHT LICENSE - -Redistribution and use in source and binary forms, with or without modification, are permitted without -payment of copyright license fees provided that you satisfy the following conditions: - -You must retain the complete text of this software license in redistributions of the FDK AAC Codec or -your modifications thereto in source code form. - -You must retain the complete text of this software license in the documentation and/or other materials -provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. -You must make available free of charge copies of the complete source code of the FDK AAC Codec and your -modifications thereto to recipients of copies in binary form. - -The name of Fraunhofer may not be used to endorse or promote products derived from this library without -prior written permission. - -You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec -software or your modifications thereto. - -Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software -and the date of any change. For modified versions of the FDK AAC Codec, the term -"Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term -"Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." - -3. NO PATENT LICENSE - -NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, -ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with -respect to this software. - -You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized -by appropriate patent licenses. - -4. DISCLAIMER - -This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors -"AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties -of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR -CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, -including but not limited to procurement of substitute goods or services; loss of use, data, or profits, -or business interruption, however caused and on any theory of liability, whether in contract, strict -liability, or tort (including negligence), arising in any way out of the use of this software, even if -advised of the possibility of such damage. - -5. CONTACT INFORMATION - -Fraunhofer Institute for Integrated Circuits IIS -Attention: Audio and Multimedia Departments - FDK AAC LL -Am Wolfsmantel 33 -91058 Erlangen, Germany - -www.iis.fraunhofer.de/amm -amm-info@iis.fraunhofer.de ------------------------------------------------------------------------------------------------------------ */ - -/*************************** Fraunhofer IIS *********************** - - Author(s): - Description: SBR encoder top level processing prototype - -******************************************************************************/ - -#ifndef __SBR_ENCODER_H -#define __SBR_ENCODER_H - -#include "common_fix.h" -#include "FDK_audio.h" - -#include "FDK_bitstream.h" - -/* core coder helpers */ -#define MAX_TRANS_FAC 8 -#define MAX_CODEC_FRAME_RATIO 2 -#define MAX_PAYLOAD_SIZE 256 - -typedef enum codecType -{ - CODEC_AAC=0, - CODEC_AACLD=1, - CODEC_UNSPECIFIED=99 -} CODEC_TYPE; - - -typedef struct -{ - INT bitRate; - INT nChannels; - INT sampleFreq; - INT transFac; - INT standardBitrate; -} CODEC_PARAM; - -typedef enum -{ - SBR_MONO, - SBR_LEFT_RIGHT, - SBR_COUPLING, - SBR_SWITCH_LRC -} SBR_STEREO_MODE; - -/* bitstream syntax flags */ -enum -{ - SBR_SYNTAX_LOW_DELAY = 0x0001, - SBR_SYNTAX_SCALABLE = 0x0002, - SBR_SYNTAX_CRC = 0x0004, - SBR_SYNTAX_DRM_CRC = 0x0008 -}; - -typedef struct -{ - CODEC_TYPE coreCoder; /*!< LC or ELD */ - UINT bitrateFrom; /*!< inclusive */ - UINT bitrateTo; /*!< exclusive */ - - UINT sampleRate; /*!< */ - UCHAR numChannels; /*!< */ - - UCHAR startFreq; /*!< bs_start_freq */ - UCHAR startFreqSpeech; /*!< bs_start_freq for speech config flag */ - UCHAR stopFreq; /*!< bs_stop_freq */ - UCHAR stopFreqSpeech; /*!< bs_stop_freq for speech config flag */ - - UCHAR numNoiseBands; /*!< */ - UCHAR noiseFloorOffset; /*!< */ - SCHAR noiseMaxLevel; /*!< */ - SBR_STEREO_MODE stereoMode; /*!< */ - UCHAR freqScale; /*!< */ -} sbrTuningTable_t; - -typedef struct sbrConfiguration -{ - /* - core coder dependent configurations - */ - CODEC_PARAM codecSettings; /*!< Core coder settings. To be set from core coder. */ - INT SendHeaderDataTime; /*!< SBR header send update frequency in ms. */ - INT useWaveCoding; /*!< Flag: usage of wavecoding tool. */ - INT crcSbr; /*!< Flag: usage of SBR-CRC. */ - INT dynBwSupported; /*!< Flag: support for dynamic bandwidth in this combination. */ - INT parametricCoding; /*!< Flag: usage of parametric coding tool. */ - INT downSampleFactor; /*!< Sampling rate relation between the SBR and the core encoder. */ - int freq_res_fixfix[3]; /*!< Frequency resolution of envelopes in frame class FIXFIX - 0=1 Env; 1=2 Env; 2=4 Env; */ - /* - core coder dependent tuning parameters - */ - INT tran_thr; /*!< SBR transient detector threshold (* 100). */ - INT noiseFloorOffset; /*!< Noise floor offset. */ - UINT useSpeechConfig; /*!< Flag: adapt tuning parameters according to speech. */ - - - - /* - core coder independent configurations - */ - INT sbrFrameSize; /*!< SBR frame size in samples. Will be calculated from core coder settings. */ - INT sbr_data_extra; /*!< Flag usage of data extra. */ - INT amp_res; /*!< Amplitude resolution. */ - INT ana_max_level; /*!< Noise insertion maximum level. */ - INT tran_fc; /*!< Transient detector start frequency. */ - INT tran_det_mode; /*!< Transient detector mode. */ - INT spread; /*!< Flag: usage of SBR spread. */ - INT stat; /*!< Flag: usage of static framing. */ - INT e; /*!< Number of envelopes when static framing is chosen. */ - SBR_STEREO_MODE stereoMode; /*!< SBR stereo mode. */ - INT deltaTAcrossFrames; /*!< Flag: allow time-delta coding. */ - FIXP_DBL dF_edge_1stEnv; /*!< Extra fraction delta-F coding is allowed to be more expensive. */ - FIXP_DBL dF_edge_incr; /*!< Increment dF_edge_1stEnv this much if dT-coding was used this frame. */ - INT sbr_invf_mode; /*!< Inverse filtering mode. */ - INT sbr_xpos_mode; /*!< Transposer mode. */ - INT sbr_xpos_ctrl; /*!< Transposer control. */ - INT sbr_xpos_level; /*!< Transposer 3rd order level. */ - INT startFreq; /*!< The start frequency table index. */ - INT stopFreq; /*!< The stop frequency table index. */ - INT useSaPan; /*!< Flag: usage of SAPAN stereo. */ - INT dynBwEnabled; /*!< Flag: usage of dynamic bandwidth. */ - INT bParametricStereo; /*!< Flag: usage of parametric stereo coding tool. */ - - /* - header_extra1 configuration - */ - UCHAR freqScale; /*!< Frequency grouping. */ - INT alterScale; /*!< Scale resolution. */ - INT sbr_noise_bands; /*!< Number of noise bands. */ - - - /* - header_extra2 configuration - */ - INT sbr_limiter_bands; /*!< Number of limiter bands. */ - INT sbr_limiter_gains; /*!< Gain of limiter. */ - INT sbr_interpol_freq; /*!< Flag: use interpolation in freq. direction. */ - INT sbr_smoothing_length; /*!< Flag: choose length 4 or 0 (=on, off). */ - UCHAR init_amp_res_FF; -} sbrConfiguration, *sbrConfigurationPtr ; - -typedef struct SBR_CONFIG_DATA -{ - UINT sbrSyntaxFlags; /**< SBR syntax flags derived from AOT. */ - INT nChannels; /**< Number of channels. */ - - INT nSfb[2]; /**< Number of SBR scalefactor bands for LO_RES and HI_RES (?) */ - INT num_Master; /**< Number of elements in v_k_master. */ - INT sampleFreq; /**< SBR sampling frequency. */ - INT frameSize; - INT xOverFreq; /**< The SBR start frequency. */ - INT dynXOverFreq; /**< Used crossover frequency when dynamic bandwidth is enabled. */ - INT noQmfBands; /**< Number of QMF frequency bands. */ - INT noQmfSlots; /**< Number of QMF slots. */ - - UCHAR *freqBandTable[2]; /**< Frequency table for low and hires, only MAX_FREQ_COEFFS/2 +1 coeefs actually needed for lowres. */ - UCHAR *v_k_master; /**< Master BandTable where freqBandTable is derived from. */ - - - SBR_STEREO_MODE stereoMode; - INT noEnvChannels; /**< Number of envelope channels. */ - - INT useWaveCoding; /**< Flag indicates whether to use wave coding at all. */ - INT useParametricCoding; /**< Flag indicates whether to use para coding at all. */ - INT xposCtrlSwitch; /**< Flag indicates whether to switch xpos ctrl on the fly. */ - INT switchTransposers; /**< Flag indicates whether to switch xpos on the fly . */ - UCHAR initAmpResFF; -} SBR_CONFIG_DATA, *HANDLE_SBR_CONFIG_DATA; - -typedef struct { - MP4_ELEMENT_ID elType; - INT bitRate; - int instanceTag; - UCHAR fParametricStereo; - UCHAR nChannelsInEl; - UCHAR ChannelIndex[2]; -} SBR_ELEMENT_INFO; - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct SBR_ENCODER *HANDLE_SBR_ENCODER; - -/** - * \brief Get the max required input buffer size including delay balancing space - * for N audio channels. - * \param noChannels Number of audio channels. - * \return Max required input buffer size in bytes. - */ -INT sbrEncoder_GetInBufferSize(int noChannels); - -INT sbrEncoder_Open( - HANDLE_SBR_ENCODER *phSbrEncoder, - INT nElements, - INT nChannels, - INT supportPS - ); - -/** - * \brief Get closest working bitrate to specified desired - * bitrate for a single SBR element. - * \param bitRate The desired target bit rate - * \param numChannels The amount of audio channels - * \param coreSampleRate The sample rate of the core coder - * \param aot The current Audio Object Type - * \return Closest working bit rate to bitRate value - */ -UINT sbrEncoder_LimitBitRate(UINT bitRate, UINT numChannels, UINT coreSampleRate, AUDIO_OBJECT_TYPE aot); - - -/** - * \brief Check whether downsampled SBR single rate is possible - * with given audio object type. - * \param aot The Audio object type. - * \return 0 when downsampled SBR is not possible, - * 1 when downsampled SBR is possible. - */ -UINT sbrEncoder_IsSingleRatePossible(AUDIO_OBJECT_TYPE aot); - -/** - * \brief Initialize SBR Encoder instance. - * \param phSbrEncoder Pointer to a SBR Encoder instance. - * \param elInfo Structure that describes the element/channel arrangement. - * \param noElements Amount of elements described in elInfo. - * \param inputBuffer Pointer to the encoder audio buffer - * \param bandwidth Returns the core audio encoder bandwidth (output) - * \param bufferOffset Returns the offset for the audio input data in order to do delay balancing. - * \param numChannels Input: Encoder input channels. output: core encoder channels. - * \param sampleRate Input: Encoder samplerate. output core encoder samplerate. - * \param downSampleFactor Input: Relation between SBR and core coder sampling rate; - * \param frameLength Input: Encoder frameLength. output core encoder frameLength. - * \param aot Input: Desired AOT. output AOT to be used after parameter checking. - * \param delay Input: core encoder delay. Output: total delay because of SBR. - * \param transformFactor The core encoder transform factor (blockswitching). - * \param headerPeriod Repetition rate of the SBR header: - * - (-1) means intern configuration. - * - (1-10) corresponds to header repetition rate in frames. - * \return 0 on success, and non-zero if failed. - */ -INT sbrEncoder_Init( - HANDLE_SBR_ENCODER hSbrEncoder, - SBR_ELEMENT_INFO elInfo[(8)], - int noElements, - INT_PCM *inputBuffer, - INT *coreBandwidth, - INT *inputBufferOffset, - INT *numChannels, - INT *sampleRate, - UINT *downSampleFactor, - INT *frameLength, - AUDIO_OBJECT_TYPE aot, - int *delay, - int transformFactor, - const int headerPeriod, - ULONG statesInitFlag - ); - -/** - * \brief Do delay line buffers housekeeping. To be called after each encoded audio frame. - * \param hEnvEnc SBR Encoder handle. - * \param timeBuffer Pointer to the encoder audio buffer. - * \return 0 on success, and non-zero if failed. - */ -INT sbrEncoder_UpdateBuffers(HANDLE_SBR_ENCODER hEnvEnc, - INT_PCM *timeBuffer - ); - -/** - * \brief Close SBR encoder instance. - * \param phEbrEncoder Handle of SBR encoder instance to be closed. - * \return void - */ -void sbrEncoder_Close(HANDLE_SBR_ENCODER *phEbrEncoder); - -/** - * \brief Encode SBR data of one complete audio frame. - * \param hEnvEncoder Handle of SBR encoder instance. - * \param samples Time samples, always interleaved. - * \param timeInStride Channel stride factor of samples buffer. - * \param sbrDataBits Size of SBR payload in bits. - * \param sbrData SBR payload. - * \return 0 on success, and non-zero if failed. - */ -INT sbrEncoder_EncodeFrame(HANDLE_SBR_ENCODER hEnvEncoder, - INT_PCM *samples, - UINT timeInStride, - UINT sbrDataBits[(8)], - UCHAR sbrData[(8)][MAX_PAYLOAD_SIZE] - ); - -/** - * \brief Write SBR headers of one SBR element. - * \param sbrEncoder Handle of the SBR encoder instance. - * \param hBs Handle of bit stream handle to write SBR header to. - * \param element_index Index of the SBR element which header should be written. - * \param fSendHeaders Flag indicating that the SBR encoder should send more headers in the SBR payload or not. - * \return void - */ -void sbrEncoder_GetHeader(HANDLE_SBR_ENCODER sbrEncoder, - HANDLE_FDK_BITSTREAM hBs, - INT element_index, - int fSendHeaders); - -/** - * \brief SBR encoder bitrate estimation. - * \param hSbrEncoder SBR encoder handle. - * \return Estimated bitrate. - */ -INT sbrEncoder_GetEstimateBitrate(HANDLE_SBR_ENCODER hSbrEncoder); - - -/** - * \brief Delay between input data and downsampled output data. - * \param hSbrEncoder SBR encoder handle. - * \return Delay. - */ -INT sbrEncoder_GetInputDataDelay(HANDLE_SBR_ENCODER hSbrEncoder); - -/** - * \brief Get decoder library version info. - * \param info Pointer to an allocated LIB_INFO struct, where library info is written to. - * \return 0 on sucess. - */ -INT sbrEncoder_GetLibInfo(LIB_INFO *info); - -void sbrPrintRAM(void); - -void sbrPrintROM(void); - -#ifdef __cplusplus - } -#endif - -#endif /* ifndef __SBR_MAIN_H */ -- cgit v1.2.3