From 14c7b800eaa23e9da7c92c7c4df397d0c191f097 Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Sat, 10 Sep 2016 20:15:44 +0200 Subject: Remove FDK-AAC --- libSBRdec/src/lpp_tran.h | 242 ----------------------------------------------- 1 file changed, 242 deletions(-) delete mode 100644 libSBRdec/src/lpp_tran.h (limited to 'libSBRdec/src/lpp_tran.h') diff --git a/libSBRdec/src/lpp_tran.h b/libSBRdec/src/lpp_tran.h deleted file mode 100644 index 003a547..0000000 --- a/libSBRdec/src/lpp_tran.h +++ /dev/null @@ -1,242 +0,0 @@ - -/* ----------------------------------------------------------------------------------------------------------- -Software License for The Fraunhofer FDK AAC Codec Library for Android - -© Copyright 1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - All rights reserved. - - 1. INTRODUCTION -The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements -the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. -This FDK AAC Codec software is intended to be used on a wide variety of Android devices. - -AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual -audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by -independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part -of the MPEG specifications. - -Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) -may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners -individually for the purpose of encoding or decoding bit streams in products that are compliant with -the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license -these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec -software may already be covered under those patent licenses when it is used for those licensed purposes only. - -Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, -are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional -applications information and documentation. - -2. COPYRIGHT LICENSE - -Redistribution and use in source and binary forms, with or without modification, are permitted without -payment of copyright license fees provided that you satisfy the following conditions: - -You must retain the complete text of this software license in redistributions of the FDK AAC Codec or -your modifications thereto in source code form. - -You must retain the complete text of this software license in the documentation and/or other materials -provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. -You must make available free of charge copies of the complete source code of the FDK AAC Codec and your -modifications thereto to recipients of copies in binary form. - -The name of Fraunhofer may not be used to endorse or promote products derived from this library without -prior written permission. - -You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec -software or your modifications thereto. - -Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software -and the date of any change. For modified versions of the FDK AAC Codec, the term -"Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term -"Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." - -3. NO PATENT LICENSE - -NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, -ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with -respect to this software. - -You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized -by appropriate patent licenses. - -4. DISCLAIMER - -This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors -"AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties -of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR -CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, -including but not limited to procurement of substitute goods or services; loss of use, data, or profits, -or business interruption, however caused and on any theory of liability, whether in contract, strict -liability, or tort (including negligence), arising in any way out of the use of this software, even if -advised of the possibility of such damage. - -5. CONTACT INFORMATION - -Fraunhofer Institute for Integrated Circuits IIS -Attention: Audio and Multimedia Departments - FDK AAC LL -Am Wolfsmantel 33 -91058 Erlangen, Germany - -www.iis.fraunhofer.de/amm -amm-info@iis.fraunhofer.de ------------------------------------------------------------------------------------------------------------ */ - -/*! - \file - \brief Low Power Profile Transposer, -*/ - -#ifndef _LPP_TRANS_H -#define _LPP_TRANS_H - -#include "sbrdecoder.h" -#include "qmf.h" - -/* - Common -*/ -#define QMF_OUT_SCALE 8 - -/* - Env-Adjust -*/ -#define MAX_NOISE_ENVELOPES 2 -#define MAX_NOISE_COEFFS 5 -#define MAX_NUM_NOISE_VALUES (MAX_NOISE_ENVELOPES * MAX_NOISE_COEFFS) -#define MAX_NUM_LIMITERS 12 - -/* Set MAX_ENVELOPES to the largest value of all supported BSFORMATs - by overriding MAX_ENVELOPES in the correct order: */ -#define MAX_ENVELOPES_HEAAC 5 -#define MAX_ENVELOPES MAX_ENVELOPES_HEAAC - -#define MAX_FREQ_COEFFS 48 -#define MAX_FREQ_COEFFS_FS44100 35 -#define MAX_FREQ_COEFFS_FS48000 32 - - -#define MAX_NUM_ENVELOPE_VALUES (MAX_ENVELOPES * MAX_FREQ_COEFFS) - -#define MAX_GAIN_EXP 34 -/* Maximum gain will be sqrt(0.5 * 2^MAX_GAIN_EXP) - example: 34=99dB */ -#define MAX_GAIN_CONCEAL_EXP 1 -/* Maximum gain will be sqrt(0.5 * 2^MAX_GAIN_CONCEAL_EXP) in concealment case (0dB) */ - -/* - LPP Transposer -*/ -#define LPC_ORDER 2 - -#define MAX_INVF_BANDS MAX_NOISE_COEFFS - -#define MAX_NUM_PATCHES 6 -#define SHIFT_START_SB 1 /*!< lowest subband of source range */ - -typedef enum -{ - INVF_OFF = 0, - INVF_LOW_LEVEL, - INVF_MID_LEVEL, - INVF_HIGH_LEVEL, - INVF_SWITCHED /* not a real choice but used here to control behaviour */ -} -INVF_MODE; - - -/** parameter set for one single patch */ -typedef struct { - UCHAR sourceStartBand; /*!< first band in lowbands where to take the samples from */ - UCHAR sourceStopBand; /*!< first band in lowbands which is not included in the patch anymore */ - UCHAR guardStartBand; /*!< first band in highbands to be filled with zeros in order to - reduce interferences between patches */ - UCHAR targetStartBand; /*!< first band in highbands to be filled with whitened lowband signal */ - UCHAR targetBandOffs; /*!< difference between 'startTargetBand' and 'startSourceBand' */ - UCHAR numBandsInPatch; /*!< number of consecutive bands in this one patch */ -} PATCH_PARAM; - - -/** whitening factors for different levels of whitening - need to be initialized corresponding to crossover frequency */ -typedef struct { - FIXP_DBL off; /*!< bw factor for signal OFF */ - FIXP_DBL transitionLevel; - FIXP_DBL lowLevel; /*!< bw factor for signal LOW_LEVEL */ - FIXP_DBL midLevel; /*!< bw factor for signal MID_LEVEL */ - FIXP_DBL highLevel; /*!< bw factor for signal HIGH_LEVEL */ -} WHITENING_FACTORS; - - -/*! The transposer settings are calculated on a header reset and are shared by both channels. */ -typedef struct { - UCHAR nCols; /*!< number subsamples of a codec frame */ - UCHAR noOfPatches; /*!< number of patches */ - UCHAR lbStartPatching; /*!< first band of lowbands that will be patched */ - UCHAR lbStopPatching; /*!< first band that won't be patched anymore*/ - UCHAR bwBorders[MAX_NUM_NOISE_VALUES]; /*!< spectral bands with different inverse filtering levels */ - - PATCH_PARAM patchParam[MAX_NUM_PATCHES]; /*!< new parameter set for patching */ - WHITENING_FACTORS whFactors; /*!< the pole moving factors for certain whitening levels as indicated - in the bitstream depending on the crossover frequency */ - UCHAR overlap; /*!< Overlap size */ -} TRANSPOSER_SETTINGS; - - -typedef struct -{ - TRANSPOSER_SETTINGS *pSettings; /*!< Common settings for both channels */ - FIXP_DBL bwVectorOld[MAX_NUM_PATCHES]; /*!< pole moving factors of past frame */ - FIXP_DBL lpcFilterStatesReal[LPC_ORDER][(32)]; /*!< pointer array to save filter states */ - FIXP_DBL lpcFilterStatesImag[LPC_ORDER][(32)]; /*!< pointer array to save filter states */ -} -SBR_LPP_TRANS; - -typedef SBR_LPP_TRANS *HANDLE_SBR_LPP_TRANS; - - -void lppTransposer (HANDLE_SBR_LPP_TRANS hLppTrans, - QMF_SCALE_FACTOR *sbrScaleFactor, - FIXP_DBL **qmfBufferReal, - - FIXP_DBL *degreeAlias, - FIXP_DBL **qmfBufferImag, - const int useLP, - const int timeStep, - const int firstSlotOffset, - const int lastSlotOffset, - const int nInvfBands, - INVF_MODE *sbr_invf_mode, - INVF_MODE *sbr_invf_mode_prev - ); - - -SBR_ERROR -createLppTransposer (HANDLE_SBR_LPP_TRANS hLppTrans, - TRANSPOSER_SETTINGS *pSettings, - const int highBandStartSb, - UCHAR *v_k_master, - const int numMaster, - const int usb, - const int timeSlots, - const int nCols, - UCHAR *noiseBandTable, - const int noNoiseBands, - UINT fs, - const int chan, - const int overlap); - - -SBR_ERROR -resetLppTransposer (HANDLE_SBR_LPP_TRANS hLppTrans, - UCHAR highBandStartSb, - UCHAR *v_k_master, - UCHAR numMaster, - UCHAR *noiseBandTable, - UCHAR noNoiseBands, - UCHAR usb, - UINT fs); - - - -#endif /* _LPP_TRANS_H */ - -- cgit v1.2.3