diff options
Diffstat (limited to 'libSBRdec/include')
| -rw-r--r-- | libSBRdec/include/sbrdecoder.h | 275 |
1 files changed, 275 insertions, 0 deletions
diff --git a/libSBRdec/include/sbrdecoder.h b/libSBRdec/include/sbrdecoder.h new file mode 100644 index 0000000..00aa997 --- /dev/null +++ b/libSBRdec/include/sbrdecoder.h @@ -0,0 +1,275 @@ +/************************ Fraunhofer IIS SBR decoder library ****************** + + (C) Copyright Fraunhofer IIS (2005) + All Rights Reserved + + Please be advised that this software and/or program delivery is + Confidential Information of Fraunhofer and subject to and covered by the + + Fraunhofer IIS Software Evaluation Agreement + between Google Inc. and Fraunhofer + effective and in full force since March 1, 2012. + + You may use this software and/or program only under the terms and + conditions described in the above mentioned Fraunhofer IIS Software + Evaluation Agreement. Any other and/or further use requires a separate agreement. + + + $Id$ + Author(s): + Description: SBR decoder front-end prototypes and definitions. + + This software and/or program is protected by copyright law and international + treaties. Any reproduction or distribution of this software and/or program, + or any portion of it, may result in severe civil and criminal penalties, and + will be prosecuted to the maximum extent possible under law. + +******************************************************************************/ + +#ifndef __SBRDECODER_H +#define __SBRDECODER_H + +#include "common_fix.h" + +#include "FDK_bitstream.h" +#include "FDK_audio.h" + + +#define SBR_DEBUG_EXTHLP "\ +--- SBR ---\n\ + 0x00000010 Ancillary data and SBR-Header\n\ + 0x00000020 SBR-Side info\n\ + 0x00000040 Decoded SBR-bitstream data, e.g. envelope data\n\ + 0x00000080 SBR-Bitstream statistics\n\ + 0x00000100 Miscellaneous SBR-messages\n\ + 0x00000200 SBR-Energies and gains in the adjustor\n\ + 0x00000400 Fatal SBR errors\n\ + 0x00000800 Transposer coefficients for inverse filtering\n\ +" + +/* Capability flags */ +#define CAPF_SBR_LP 0x00000001 /*!< Flag indicating library's capability of Low Power mode. */ +#define CAPF_SBR_HQ 0x00000002 /*!< Flag indicating library's capability of High Quality mode. */ +#define CAPF_SBR_DRM_BS 0x00000004 /*!< Flag indicating library's capability to decode DRM SBR data. */ +#define CAPF_SBR_CONCEALMENT 0x00000008 /*!< Flag indicating library's capability to conceal erroneous frames. */ +#define CAPF_SBR_DRC 0x00000010 /*!< Flag indicating library's capability for Dynamic Range Control. */ +#define CAPF_SBR_PS_MPEG 0x00000020 /*!< Flag indicating library's capability to do MPEG Parametric Stereo. */ +#define CAPF_SBR_PS_DRM 0x00000040 /*!< Flag indicating library's capability to do DRM Parametric Stereo. */ + +typedef enum +{ + SBRDEC_OK = 0, /*!< All fine. */ + /* SBRDEC_CONCEAL, */ + /* SBRDEC_NOSYNCH, */ + /* SBRDEC_ILLEGAL_PROGRAM, */ + /* SBRDEC_ILLEGAL_TAG, */ + /* SBRDEC_ILLEGAL_CHN_CONFIG, */ + /* SBRDEC_ILLEGAL_SECTION, */ + /* SBRDEC_ILLEGAL_SCFACTORS, */ + /* SBRDEC_ILLEGAL_PULSE_DATA, */ + /* SBRDEC_MAIN_PROFILE_NOT_IMPLEMENTED, */ + /* SBRDEC_GC_NOT_IMPLEMENTED, */ + /* SBRDEC_ILLEGAL_PLUS_ELE_ID, */ + SBRDEC_CREATE_ERROR, /*!< */ + SBRDEC_NOT_INITIALIZED, /*!< */ + SBRDEC_MEM_ALLOC_FAILED, /*!< Memory allocation failed. Probably not enough memory available. */ + SBRDEC_PARSE_ERROR, /*!< */ + SBRDEC_UNSUPPORTED_CONFIG, /*!< */ + SBRDEC_SET_PARAM_FAIL /*!< */ +} SBR_ERROR; + +typedef enum +{ + SBR_SYSTEM_BITSTREAM_DELAY, /*!< System: Switch to enable an additional SBR bitstream delay of one frame. */ + SBR_QMF_MODE, /*!< Set QMF mode, either complex or low power. */ + SBR_LD_QMF_TIME_ALIGN, /*!< Set QMF type, either LD-MPS or CLDFB. Relevant for ELD streams only. */ + SBR_BS_INTERRUPTION /*!< Signal bit stream interruption. Value is ignored. */ +} SBRDEC_PARAM; + +typedef struct SBR_DECODER_INSTANCE *HANDLE_SBRDECODER; + + +#ifdef __cplusplus +extern "C" +{ +#endif + + +/** + * \brief Allocates and initializes one SBR decoder instance. + * \param pSelf Pointer to where a SBR decoder handle is copied into. + * \return Error code. + */ +SBR_ERROR sbrDecoder_Open ( HANDLE_SBRDECODER *pSelf ); + +/** + * \brief Initialize a SBR decoder runtime instance. Must be called before decoding starts. + * + * \param self Handle to a SBR decoder instance. + * \param sampleRateIn Input samplerate of the SBR decoder instance. + * \param sampleRateOut Output samplerate of the SBR decoder instance. + * \param samplesPerFrame Number of samples per frames. + * \param coreCodec Audio Object Type (AOT) of the core codec. + * \param elementID Table with MPEG-4 element Ids in canonical order. + * \param forceReset Flag that enforces a complete decoder reset. + * + * \return Error code. + */ +SBR_ERROR sbrDecoder_InitElement ( + HANDLE_SBRDECODER self, + const int sampleRateIn, + const int sampleRateOut, + const int samplesPerFrame, + const AUDIO_OBJECT_TYPE coreCodec, + const MP4_ELEMENT_ID elementID, + const int elementIndex + ); + +/** + * \brief pass out of band SBR header to SBR decoder + * + * \param self Handle to a SBR decoder instance. + * \param hBs bit stream handle data source. + * \param elementID SBR element ID. + * \param elementIndex SBR element index. + * + * \return Error code. + */ +INT sbrDecoder_Header ( + HANDLE_SBRDECODER self, + HANDLE_FDK_BITSTREAM hBs, + const INT sampleRateIn, + const INT sampleRateOut, + const INT samplesPerFrame, + const AUDIO_OBJECT_TYPE coreCodec, + const MP4_ELEMENT_ID elementID, + const INT elementIndex + ); + +/** + * \brief Set a parameter of the SBR decoder runtime instance. + * \param self SBR decoder handle. + * \param param Parameter which will be set if successfull. + * \param value New parameter value. + * \return Error code. + */ +SBR_ERROR sbrDecoder_SetParam ( HANDLE_SBRDECODER self, + const SBRDEC_PARAM param, + const INT value ); + +/** + * \brief Feed DRC channel data into a SBR decoder runtime instance. + * + * \param self SBR decoder handle. + * \param ch Channel number to which the DRC data is associated to. + * \param numBands Number of DRC bands. + * \param pNextFact_mag Pointer to a table with the DRC factor magnitudes. + * \param nextFact_exp Exponent for all DRC factors. + * \param drcInterpolationScheme DRC interpolation scheme. + * \param winSequence Window sequence from core coder (eight short or one long window). + * \param pBandTop Pointer to a table with the top borders for all DRC bands. + * + * \return Error code. + */ +SBR_ERROR sbrDecoder_drcFeedChannel ( HANDLE_SBRDECODER self, + INT ch, + UINT numBands, + FIXP_DBL *pNextFact_mag, + INT nextFact_exp, + SHORT drcInterpolationScheme, + UCHAR winSequence, + USHORT *pBandTop ); + +/** + * \brief Disable SBR DRC for a certain channel. + * + * \param hSbrDecoder SBR decoder handle. + * \param ch Number of the channel that has to be disabled. + * + * \return None. + */ +void sbrDecoder_drcDisable ( HANDLE_SBRDECODER self, + INT ch ); + + +/** + * \brief Parse one SBR element data extension data block. The bit stream position will + * be placed at the end of the SBR payload block. The remaining bits will be returned + * into *count if a payload length is given (byPayLen > 0). If no SBR payload length is + * given (bsPayLen < 0) then the bit stream position on return will be random after this + * function call in case of errors, and any further decoding will be completely pointless. + * + * \param self SBR decoder handle. + * \param hBs Bit stream handle as data source. + * \param count Pointer to an integer where the amount of parsed SBR payload bits is stored into. + * \param bsPayLen If > 0 this value is the SBR payload length. If < 0, the SBR payload length is unknown. + * \param flags CRC flag (0: EXT_SBR_DATA; 1: EXT_SBR_DATA_CRC) + * \param prev_element Previous MPEG-4 element ID. + * \param element_index Index of the current element. + * + * \return Error code. + */ +SBR_ERROR sbrDecoder_Parse ( + HANDLE_SBRDECODER self, + HANDLE_FDK_BITSTREAM hBs, + int *count, + int bsPayLen, + int crcFlag, + MP4_ELEMENT_ID prev_element, + int element_index, + int fGlobalIndependencyFlag + ); + +/** + * \brief This function decodes the given SBR bitstreams and applies SBR to the given time data. + * + * SBR-processing works InPlace. I.e. the calling function has to provide + * a time domain buffer timeData which can hold the completely decoded + * result. + * + * Left and right channel are read and stored according to the + * interleaving flag, frame length and number of channels. + * + * \param self Handle of an open SBR decoder instance. + * \param hSbrBs SBR Bitstream handle. + * \param timeData Pointer to input and finally upsampled output data. + * \param numChannels Pointer to a buffer holding the number of channels in time data buffer. + * \param sampleRate Output samplerate. + * \param channelMapping Channel mapping indices. + * \param interleaved Flag indicating if time data is stored interleaved (1: Interleaved time data, 0: non-interleaved timedata). + * \param coreDecodedOk Flag indicating if the core decoder did not find any error (0: core decoder found errors, 1: no errors). + * \param psDecoded Pointer to a buffer holding a flag. Input: PS is possible, Output: PS has been rendered. + * + * \return Error code. + */ +SBR_ERROR sbrDecoder_Apply ( HANDLE_SBRDECODER self, + INT_PCM *timeData, + int *numChannels, + int *sampleRate, + const UCHAR channelMapping[(6)], + const int interleaved, + const int coreDecodedOk, + UCHAR *psDecoded ); + + +/** + * \brief Close SBR decoder instance and free memory. + * \param self SBR decoder handle. + * \return Error Code. + */ +SBR_ERROR sbrDecoder_Close ( HANDLE_SBRDECODER *self ); + + +/** + * \brief Get SBR decoder library information. + * \param info Pointer to a LIB_INFO struct, where library information is written to. + * \return 0 on success, -1 if invalid handle or if no free element is available to write information to. + */ +INT sbrDecoder_GetLibInfo( LIB_INFO *info ); + + +#ifdef __cplusplus +} +#endif + +#endif |