diff options
Diffstat (limited to 'fdk-aac/libSBRdec/src/lpp_tran.h')
| -rw-r--r-- | fdk-aac/libSBRdec/src/lpp_tran.h | 275 |
1 files changed, 275 insertions, 0 deletions
diff --git a/fdk-aac/libSBRdec/src/lpp_tran.h b/fdk-aac/libSBRdec/src/lpp_tran.h new file mode 100644 index 0000000..51b4395 --- /dev/null +++ b/fdk-aac/libSBRdec/src/lpp_tran.h @@ -0,0 +1,275 @@ +/* ----------------------------------------------------------------------------- +Software License for The Fraunhofer FDK AAC Codec Library for Android + +© Copyright 1995 - 2018 Fraunhofer-Gesellschaft zur Förderung der angewandten +Forschung e.V. All rights reserved. + + 1. INTRODUCTION +The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software +that implements the MPEG Advanced Audio Coding ("AAC") encoding and decoding +scheme for digital audio. This FDK AAC Codec software is intended to be used on +a wide variety of Android devices. + +AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient +general perceptual audio codecs. AAC-ELD is considered the best-performing +full-bandwidth communications codec by independent studies and is widely +deployed. AAC has been standardized by ISO and IEC as part of the MPEG +specifications. + +Patent licenses for necessary patent claims for the FDK AAC Codec (including +those of Fraunhofer) may be obtained through Via Licensing +(www.vialicensing.com) or through the respective patent owners individually for +the purpose of encoding or decoding bit streams in products that are compliant +with the ISO/IEC MPEG audio standards. Please note that most manufacturers of +Android devices already license these patent claims through Via Licensing or +directly from the patent owners, and therefore FDK AAC Codec software may +already be covered under those patent licenses when it is used for those +licensed purposes only. + +Commercially-licensed AAC software libraries, including floating-point versions +with enhanced sound quality, are also available from Fraunhofer. Users are +encouraged to check the Fraunhofer website for additional applications +information and documentation. + +2. COPYRIGHT LICENSE + +Redistribution and use in source and binary forms, with or without modification, +are permitted without payment of copyright license fees provided that you +satisfy the following conditions: + +You must retain the complete text of this software license in redistributions of +the FDK AAC Codec or your modifications thereto in source code form. + +You must retain the complete text of this software license in the documentation +and/or other materials provided with redistributions of the FDK AAC Codec or +your modifications thereto in binary form. You must make available free of +charge copies of the complete source code of the FDK AAC Codec and your +modifications thereto to recipients of copies in binary form. + +The name of Fraunhofer may not be used to endorse or promote products derived +from this library without prior written permission. + +You may not charge copyright license fees for anyone to use, copy or distribute +the FDK AAC Codec software or your modifications thereto. + +Your modified versions of the FDK AAC Codec must carry prominent notices stating +that you changed the software and the date of any change. For modified versions +of the FDK AAC Codec, the term "Fraunhofer FDK AAC Codec Library for Android" +must be replaced by the term "Third-Party Modified Version of the Fraunhofer FDK +AAC Codec Library for Android." + +3. NO PATENT LICENSE + +NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without +limitation the patents of Fraunhofer, ARE GRANTED BY THIS SOFTWARE LICENSE. +Fraunhofer provides no warranty of patent non-infringement with respect to this +software. + +You may use this FDK AAC Codec software or modifications thereto only for +purposes that are authorized by appropriate patent licenses. + +4. DISCLAIMER + +This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright +holders and contributors "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, +including but not limited to the implied warranties of merchantability and +fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR +CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, +or consequential damages, including but not limited to procurement of substitute +goods or services; loss of use, data, or profits, or business interruption, +however caused and on any theory of liability, whether in contract, strict +liability, or tort (including negligence), arising in any way out of the use of +this software, even if advised of the possibility of such damage. + +5. CONTACT INFORMATION + +Fraunhofer Institute for Integrated Circuits IIS +Attention: Audio and Multimedia Departments - FDK AAC LL +Am Wolfsmantel 33 +91058 Erlangen, Germany + +www.iis.fraunhofer.de/amm +amm-info@iis.fraunhofer.de +----------------------------------------------------------------------------- */ + +/**************************** SBR decoder library ****************************** + + Author(s): + + Description: + +*******************************************************************************/ + +/*! + \file + \brief Low Power Profile Transposer +*/ + +#ifndef LPP_TRAN_H +#define LPP_TRAN_H + +#include "sbrdecoder.h" +#include "hbe.h" +#include "qmf.h" + +/* + Common +*/ +#define QMF_OUT_SCALE 8 + +/* + Frequency scales +*/ + +/* + Env-Adjust +*/ +#define MAX_NOISE_ENVELOPES 2 +#define MAX_NOISE_COEFFS 5 +#define MAX_NUM_NOISE_VALUES (MAX_NOISE_ENVELOPES * MAX_NOISE_COEFFS) +#define MAX_NUM_LIMITERS 12 + +/* Set MAX_ENVELOPES to the largest value of all supported BSFORMATs + by overriding MAX_ENVELOPES in the correct order: */ +#define MAX_ENVELOPES_LEGACY 5 +#define MAX_ENVELOPES_USAC 8 +#define MAX_ENVELOPES MAX_ENVELOPES_USAC + +#define MAX_FREQ_COEFFS_DUAL_RATE 48 +#define MAX_FREQ_COEFFS_QUAD_RATE 56 +#define MAX_FREQ_COEFFS MAX_FREQ_COEFFS_QUAD_RATE + +#define MAX_FREQ_COEFFS_FS44100 35 +#define MAX_FREQ_COEFFS_FS48000 32 + +#define MAX_NUM_ENVELOPE_VALUES (MAX_ENVELOPES * MAX_FREQ_COEFFS) + +#define MAX_GAIN_EXP 34 +/* Maximum gain will be sqrt(0.5 * 2^MAX_GAIN_EXP) + example: 34=99dB */ +#define MAX_GAIN_CONCEAL_EXP 1 +/* Maximum gain will be sqrt(0.5 * 2^MAX_GAIN_CONCEAL_EXP) in concealment case + * (0dB) */ + +/* + LPP Transposer +*/ +#define LPC_ORDER 2 + +#define MAX_INVF_BANDS MAX_NOISE_COEFFS + +#define MAX_NUM_PATCHES 6 +#define SHIFT_START_SB 1 /*!< lowest subband of source range */ + +typedef enum { + INVF_OFF = 0, + INVF_LOW_LEVEL, + INVF_MID_LEVEL, + INVF_HIGH_LEVEL, + INVF_SWITCHED /* not a real choice but used here to control behaviour */ +} INVF_MODE; + +/** parameter set for one single patch */ +typedef struct { + UCHAR sourceStartBand; /*!< first band in lowbands where to take the samples + from */ + UCHAR + sourceStopBand; /*!< first band in lowbands which is not included in the + patch anymore */ + UCHAR guardStartBand; /*!< first band in highbands to be filled with zeros in + order to reduce interferences between patches */ + UCHAR + targetStartBand; /*!< first band in highbands to be filled with whitened + lowband signal */ + UCHAR targetBandOffs; /*!< difference between 'startTargetBand' and + 'startSourceBand' */ + UCHAR numBandsInPatch; /*!< number of consecutive bands in this one patch */ +} PATCH_PARAM; + +/** whitening factors for different levels of whitening + need to be initialized corresponding to crossover frequency */ +typedef struct { + FIXP_DBL off; /*!< bw factor for signal OFF */ + FIXP_DBL transitionLevel; + FIXP_DBL lowLevel; /*!< bw factor for signal LOW_LEVEL */ + FIXP_DBL midLevel; /*!< bw factor for signal MID_LEVEL */ + FIXP_DBL highLevel; /*!< bw factor for signal HIGH_LEVEL */ +} WHITENING_FACTORS; + +/*! The transposer settings are calculated on a header reset and are shared by + * both channels. */ +typedef struct { + UCHAR nCols; /*!< number subsamples of a codec frame */ + UCHAR noOfPatches; /*!< number of patches */ + UCHAR lbStartPatching; /*!< first band of lowbands that will be patched */ + UCHAR lbStopPatching; /*!< first band that won't be patched anymore*/ + UCHAR bwBorders[MAX_NUM_NOISE_VALUES]; /*!< spectral bands with different + inverse filtering levels */ + + PATCH_PARAM + patchParam[MAX_NUM_PATCHES]; /*!< new parameter set for patching */ + WHITENING_FACTORS + whFactors; /*!< the pole moving factors for certain + whitening levels as indicated in the bitstream + depending on the crossover frequency */ + UCHAR overlap; /*!< Overlap size */ +} TRANSPOSER_SETTINGS; + +typedef struct { + TRANSPOSER_SETTINGS *pSettings; /*!< Common settings for both channels */ + FIXP_DBL + bwVectorOld[MAX_NUM_PATCHES]; /*!< pole moving factors of past frame */ + FIXP_DBL lpcFilterStatesRealLegSBR[LPC_ORDER + (3 * (4))][( + 32)]; /*!< pointer array to save filter states */ + + FIXP_DBL lpcFilterStatesImagLegSBR[LPC_ORDER + (3 * (4))][( + 32)]; /*!< pointer array to save filter states */ + + FIXP_DBL lpcFilterStatesRealHBE[LPC_ORDER + (3 * (4))][( + 64)]; /*!< pointer array to save filter states */ + FIXP_DBL lpcFilterStatesImagHBE[LPC_ORDER + (3 * (4))][( + 64)]; /*!< pointer array to save filter states */ +} SBR_LPP_TRANS; + +typedef SBR_LPP_TRANS *HANDLE_SBR_LPP_TRANS; + +void lppTransposer(HANDLE_SBR_LPP_TRANS hLppTrans, + QMF_SCALE_FACTOR *sbrScaleFactor, FIXP_DBL **qmfBufferReal, + + FIXP_DBL *degreeAlias, FIXP_DBL **qmfBufferImag, + const int useLP, const int fPreWhitening, + const int v_k_master0, const int timeStep, + const int firstSlotOffset, const int lastSlotOffset, + const int nInvfBands, INVF_MODE *sbr_invf_mode, + INVF_MODE *sbr_invf_mode_prev); + +void lppTransposerHBE( + HANDLE_SBR_LPP_TRANS hLppTrans, /*!< Handle of lpp transposer */ + HANDLE_HBE_TRANSPOSER hQmfTransposer, + QMF_SCALE_FACTOR *sbrScaleFactor, /*!< Scaling factors */ + FIXP_DBL **qmfBufferReal, /*!< Pointer to pointer to real part of subband + samples (source) */ + FIXP_DBL **qmfBufferImag, /*!< Pointer to pointer to imaginary part of + subband samples (source) */ + const int timeStep, /*!< Time step of envelope */ + const int firstSlotOffs, /*!< Start position in time */ + const int lastSlotOffs, /*!< Number of overlap-slots into next frame */ + const int nInvfBands, /*!< Number of bands for inverse filtering */ + INVF_MODE *sbr_invf_mode, /*!< Current inverse filtering modes */ + INVF_MODE *sbr_invf_mode_prev /*!< Previous inverse filtering modes */ +); + +SBR_ERROR +createLppTransposer(HANDLE_SBR_LPP_TRANS hLppTrans, + TRANSPOSER_SETTINGS *pSettings, const int highBandStartSb, + UCHAR *v_k_master, const int numMaster, const int usb, + const int timeSlots, const int nCols, UCHAR *noiseBandTable, + const int noNoiseBands, UINT fs, const int chan, + const int overlap); + +SBR_ERROR +resetLppTransposer(HANDLE_SBR_LPP_TRANS hLppTrans, UCHAR highBandStartSb, + UCHAR *v_k_master, UCHAR numMaster, UCHAR *noiseBandTable, + UCHAR noNoiseBands, UCHAR usb, UINT fs); + +#endif /* LPP_TRAN_H */ |