Remove FDK-AAC

1 files changed, 0 insertions, 419 deletions

diff --git a/libSBRenc/include/sbr_encoder.h b/libSBRenc/include/sbr_encoder.h
deleted file mode 100644
index 93dc46d..0000000
--- a/libSBRenc/include/sbr_encoder.h
+++ /dev/null
@@ -1,419 +0,0 @@
-
-/* -----------------------------------------------------------------------------------------------------------
-Software License for The Fraunhofer FDK AAC Codec Library for Android
-
-© Copyright  1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.
-  All rights reserved.
-
- 1.    INTRODUCTION
-The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements
-the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio.
-This FDK AAC Codec software is intended to be used on a wide variety of Android devices.
-
-AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual
-audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by
-independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part
-of the MPEG specifications.
-
-Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer)
-may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners
-individually for the purpose of encoding or decoding bit streams in products that are compliant with
-the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license
-these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec
-software may already be covered under those patent licenses when it is used for those licensed purposes only.
-
-Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality,
-are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional
-applications information and documentation.
-
-2.    COPYRIGHT LICENSE
-
-Redistribution and use in source and binary forms, with or without modification, are permitted without
-payment of copyright license fees provided that you satisfy the following conditions:
-
-You must retain the complete text of this software license in redistributions of the FDK AAC Codec or
-your modifications thereto in source code form.
-
-You must retain the complete text of this software license in the documentation and/or other materials
-provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form.
-You must make available free of charge copies of the complete source code of the FDK AAC Codec and your
-modifications thereto to recipients of copies in binary form.
-
-The name of Fraunhofer may not be used to endorse or promote products derived from this library without
-prior written permission.
-
-You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec
-software or your modifications thereto.
-
-Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software
-and the date of any change. For modified versions of the FDK AAC Codec, the term
-"Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term
-"Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android."
-
-3.    NO PATENT LICENSE
-
-NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer,
-ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with
-respect to this software.
-
-You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized
-by appropriate patent licenses.
-
-4.    DISCLAIMER
-
-This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors
-"AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties
-of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages,
-including but not limited to procurement of substitute goods or services; loss of use, data, or profits,
-or business interruption, however caused and on any theory of liability, whether in contract, strict
-liability, or tort (including negligence), arising in any way out of the use of this software, even if
-advised of the possibility of such damage.
-
-5.    CONTACT INFORMATION
-
-Fraunhofer Institute for Integrated Circuits IIS
-Attention: Audio and Multimedia Departments - FDK AAC LL
-Am Wolfsmantel 33
-91058 Erlangen, Germany
-
-www.iis.fraunhofer.de/amm
-amm-info@iis.fraunhofer.de
------------------------------------------------------------------------------------------------------------ */
-
-/***************************  Fraunhofer IIS ***********************
-
-   Author(s):
-   Description: SBR encoder top level processing prototype
-
-******************************************************************************/
-
-#ifndef __SBR_ENCODER_H
-#define __SBR_ENCODER_H
-
-#include "common_fix.h"
-#include "FDK_audio.h"
-
-#include "FDK_bitstream.h"
-
-/* core coder helpers */
-#define MAX_TRANS_FAC         8
-#define MAX_CODEC_FRAME_RATIO 2
-#define MAX_PAYLOAD_SIZE    256
-
-typedef enum codecType
-{
-  CODEC_AAC=0,
-  CODEC_AACLD=1,
-  CODEC_UNSPECIFIED=99
-} CODEC_TYPE;
-
-
-typedef struct
-{
-  INT bitRate;
-  INT nChannels;
-  INT sampleFreq;
-  INT transFac;
-  INT standardBitrate;
-} CODEC_PARAM;
-
-typedef enum
-{
-  SBR_MONO,
-  SBR_LEFT_RIGHT,
-  SBR_COUPLING,
-  SBR_SWITCH_LRC
-} SBR_STEREO_MODE;
-
-/* bitstream syntax flags */
-enum
-{
-  SBR_SYNTAX_LOW_DELAY = 0x0001,
-  SBR_SYNTAX_SCALABLE  = 0x0002,
-  SBR_SYNTAX_CRC       = 0x0004,
-  SBR_SYNTAX_DRM_CRC   = 0x0008
-};
-
-typedef struct
-{
-  CODEC_TYPE       coreCoder;        /*!< LC or ELD */
-  UINT             bitrateFrom;      /*!< inclusive */
-  UINT             bitrateTo;        /*!< exclusive */
-
-  UINT             sampleRate;       /*!<   */
-  UCHAR            numChannels;      /*!<   */
-
-  UCHAR            startFreq;        /*!< bs_start_freq */
-  UCHAR            startFreqSpeech;  /*!< bs_start_freq for speech config flag */
-  UCHAR            stopFreq;         /*!< bs_stop_freq */
-  UCHAR            stopFreqSpeech;   /*!< bs_stop_freq for speech config flag */
-
-  UCHAR            numNoiseBands;    /*!<   */
-  UCHAR            noiseFloorOffset; /*!<   */
-  SCHAR            noiseMaxLevel;    /*!<   */
-  SBR_STEREO_MODE  stereoMode;       /*!<   */
-  UCHAR            freqScale;        /*!<   */
-} sbrTuningTable_t;
-
-typedef struct sbrConfiguration
-{
-  /*
-     core coder dependent configurations
-  */
-  CODEC_PARAM codecSettings;  /*!< Core coder settings. To be set from core coder. */
-  INT SendHeaderDataTime;     /*!< SBR header send update frequency in ms. */
-  INT useWaveCoding;          /*!< Flag: usage of wavecoding tool. */
-  INT crcSbr;                 /*!< Flag: usage of SBR-CRC. */
-  INT dynBwSupported;         /*!< Flag: support for dynamic bandwidth in this combination. */
-  INT parametricCoding;       /*!< Flag: usage of parametric coding tool. */
-  INT downSampleFactor;       /*!< Sampling rate relation between the SBR and the core encoder. */
-  int freq_res_fixfix[3];     /*!< Frequency resolution of envelopes in frame class FIXFIX
-                                 0=1 Env; 1=2 Env; 2=4 Env; */
-  /*
-     core coder dependent tuning parameters
-  */
-  INT tran_thr;             /*!< SBR transient detector threshold (* 100). */
-  INT noiseFloorOffset;     /*!< Noise floor offset.      */
-  UINT useSpeechConfig;     /*!< Flag: adapt tuning parameters according to speech. */
-
-
-
-  /*
-     core coder independent configurations
-  */
-  INT sbrFrameSize;           /*!< SBR frame size in samples. Will be calculated from core coder settings. */
-  INT sbr_data_extra;         /*!< Flag usage of data extra. */
-  INT amp_res;                /*!< Amplitude resolution. */
-  INT ana_max_level;          /*!< Noise insertion maximum level. */
-  INT tran_fc;                /*!< Transient detector start frequency. */
-  INT tran_det_mode;          /*!< Transient detector mode. */
-  INT spread;                 /*!< Flag: usage of SBR spread. */
-  INT stat;                   /*!< Flag: usage of static framing. */
-  INT e;                      /*!< Number of envelopes when static framing is chosen. */
-  SBR_STEREO_MODE stereoMode; /*!< SBR stereo mode. */
-  INT deltaTAcrossFrames;     /*!< Flag: allow time-delta coding. */
-  FIXP_DBL dF_edge_1stEnv;    /*!< Extra fraction delta-F coding is allowed to be more expensive. */
-  FIXP_DBL dF_edge_incr;      /*!< Increment dF_edge_1stEnv this much if dT-coding was used this frame. */
-  INT sbr_invf_mode;          /*!< Inverse filtering mode. */
-  INT sbr_xpos_mode;          /*!< Transposer mode. */
-  INT sbr_xpos_ctrl;          /*!< Transposer control. */
-  INT sbr_xpos_level;         /*!< Transposer 3rd order level. */
-  INT startFreq;              /*!< The start frequency table index. */
-  INT stopFreq;               /*!< The stop frequency table index. */
-  INT useSaPan;               /*!< Flag: usage of SAPAN stereo. */
-  INT dynBwEnabled;           /*!< Flag: usage of dynamic bandwidth. */
-  INT bParametricStereo;      /*!< Flag: usage of parametric stereo coding tool. */
-
-  /*
-     header_extra1 configuration
-  */
-  UCHAR freqScale;            /*!< Frequency grouping. */
-  INT alterScale;             /*!< Scale resolution. */
-  INT sbr_noise_bands;        /*!< Number of noise bands. */
-
-
-  /*
-     header_extra2 configuration
-  */
-  INT sbr_limiter_bands;      /*!< Number of limiter bands. */
-  INT sbr_limiter_gains;      /*!< Gain of limiter. */
-  INT sbr_interpol_freq;      /*!< Flag: use interpolation in freq. direction. */
-  INT sbr_smoothing_length;   /*!< Flag: choose length 4 or 0 (=on, off). */
-  UCHAR init_amp_res_FF;
-} sbrConfiguration, *sbrConfigurationPtr ;
-
-typedef struct SBR_CONFIG_DATA
-{
-  UINT sbrSyntaxFlags;                  /**< SBR syntax flags derived from AOT. */
-  INT nChannels;                        /**< Number of channels.  */
-
-  INT nSfb[2];                          /**< Number of SBR scalefactor bands for LO_RES and HI_RES (?) */
-  INT num_Master;                       /**< Number of elements in v_k_master. */
-  INT sampleFreq;                       /**< SBR sampling frequency. */
-  INT frameSize;
-  INT xOverFreq;                        /**< The SBR start frequency. */
-  INT dynXOverFreq;                     /**< Used crossover frequency when dynamic bandwidth is enabled. */
-  INT noQmfBands;                       /**< Number of QMF frequency bands. */
-  INT noQmfSlots;                       /**< Number of QMF slots. */
-
-  UCHAR *freqBandTable[2];              /**< Frequency table for low and hires, only MAX_FREQ_COEFFS/2 +1 coeefs actually needed for lowres. */
-  UCHAR *v_k_master;                    /**< Master BandTable where freqBandTable is derived from. */
-
-
-  SBR_STEREO_MODE stereoMode;
-  INT noEnvChannels;                    /**< Number of envelope channels. */
-
-  INT useWaveCoding;                    /**< Flag indicates whether to use wave coding at all.      */
-  INT useParametricCoding;              /**< Flag indicates whether to use para coding at all.      */
-  INT xposCtrlSwitch;                   /**< Flag indicates whether to switch xpos ctrl on the fly. */
-  INT switchTransposers;                /**< Flag indicates whether to switch xpos on the fly .     */
-  UCHAR initAmpResFF;
-} SBR_CONFIG_DATA, *HANDLE_SBR_CONFIG_DATA;
-
-typedef struct {
-  MP4_ELEMENT_ID elType;
-  INT bitRate;
-  int instanceTag;
-  UCHAR fParametricStereo;
-  UCHAR nChannelsInEl;
-  UCHAR ChannelIndex[2];
-} SBR_ELEMENT_INFO;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct SBR_ENCODER *HANDLE_SBR_ENCODER;
-
-/**
- * \brief  Get the max required input buffer size including delay balancing space
- *         for N audio channels.
- * \param noChannels  Number of audio channels.
- * \return            Max required input buffer size in bytes.
- */
-INT sbrEncoder_GetInBufferSize(int noChannels);
-
-INT sbrEncoder_Open(
-        HANDLE_SBR_ENCODER  *phSbrEncoder,
-        INT                  nElements,
-        INT                  nChannels,
-        INT                  supportPS
-        );
-
-/**
- * \brief                 Get closest working bitrate to specified desired
- *                        bitrate for a single SBR element.
- * \param bitRate         The desired target bit rate
- * \param numChannels     The amount of audio channels
- * \param coreSampleRate  The sample rate of the core coder
- * \param aot             The current Audio Object Type
- * \return                Closest working bit rate to bitRate value
- */
-UINT sbrEncoder_LimitBitRate(UINT bitRate, UINT numChannels, UINT coreSampleRate, AUDIO_OBJECT_TYPE aot);
-
-
-/**
- * \brief                Check whether downsampled SBR single rate is possible
- *                       with given audio object type.
- * \param aot            The Audio object type.
- * \return               0 when downsampled SBR is not possible,
- *                       1 when downsampled SBR is possible.
- */
-UINT sbrEncoder_IsSingleRatePossible(AUDIO_OBJECT_TYPE aot);
-
-/**
- * \brief                  Initialize SBR Encoder instance.
- * \param phSbrEncoder     Pointer to a SBR Encoder instance.
- * \param elInfo           Structure that describes the element/channel arrangement.
- * \param noElements       Amount of elements described in elInfo.
- * \param inputBuffer      Pointer to the encoder audio buffer
- * \param bandwidth        Returns the core audio encoder bandwidth (output)
- * \param bufferOffset     Returns the offset for the audio input data in order to do delay balancing.
- * \param numChannels      Input: Encoder input channels. output: core encoder channels.
- * \param sampleRate       Input: Encoder samplerate. output core encoder samplerate.
- * \param downSampleFactor Input: Relation between SBR and core coder sampling rate;
- * \param frameLength      Input: Encoder frameLength. output core encoder frameLength.
- * \param aot              Input: Desired AOT. output AOT to be used after parameter checking.
- * \param delay            Input: core encoder delay. Output: total delay because of SBR.
- * \param transformFactor  The core encoder transform factor (blockswitching).
- * \param headerPeriod     Repetition rate of the SBR header:
- *                           - (-1) means intern configuration.
- *                           - (1-10) corresponds to header repetition rate in frames.
- * \return                 0 on success, and non-zero if failed.
- */
-INT sbrEncoder_Init(
-        HANDLE_SBR_ENCODER   hSbrEncoder,
-        SBR_ELEMENT_INFO     elInfo[(8)],
-        int                  noElements,
-        INT_PCM             *inputBuffer,
-        INT                 *coreBandwidth,
-        INT                 *inputBufferOffset,
-        INT                 *numChannels,
-        INT                 *sampleRate,
-        UINT                *downSampleFactor,
-        INT                 *frameLength,
-        AUDIO_OBJECT_TYPE    aot,
-        int                 *delay,
-        int                  transformFactor,
-        const int            headerPeriod,
-        ULONG                statesInitFlag
-        );
-
-/**
- * \brief             Do delay line buffers housekeeping. To be called after each encoded audio frame.
- * \param hEnvEnc     SBR Encoder handle.
- * \param timeBuffer  Pointer to the encoder audio buffer.
- * \return            0 on success, and non-zero if failed.
- */
-INT sbrEncoder_UpdateBuffers(HANDLE_SBR_ENCODER hEnvEnc,
-                             INT_PCM *timeBuffer
-                            );
-
-/**
- * \brief               Close SBR encoder instance.
- * \param phEbrEncoder  Handle of SBR encoder instance to be closed.
- * \return              void
- */
-void sbrEncoder_Close(HANDLE_SBR_ENCODER *phEbrEncoder);
-
-/**
- * \brief               Encode SBR data of one complete audio frame.
- * \param hEnvEncoder   Handle of SBR encoder instance.
- * \param samples       Time samples, always interleaved.
- * \param timeInStride  Channel stride factor of samples buffer.
- * \param sbrDataBits   Size of SBR payload in bits.
- * \param sbrData       SBR payload.
- * \return              0 on success, and non-zero if failed.
- */
-INT sbrEncoder_EncodeFrame(HANDLE_SBR_ENCODER  hEnvEncoder,
-                           INT_PCM            *samples,
-                           UINT                timeInStride,
-                           UINT                sbrDataBits[(8)],
-                           UCHAR               sbrData[(8)][MAX_PAYLOAD_SIZE]
-                          );
-
-/**
- * \brief               Write SBR headers of one SBR element.
- * \param sbrEncoder    Handle of the SBR encoder instance.
- * \param hBs           Handle of bit stream handle to write SBR header to.
- * \param element_index Index of the SBR element which header should be written.
- * \param fSendHeaders  Flag indicating that the SBR encoder should send more headers in the SBR payload or not.
- * \return              void
- */
-void sbrEncoder_GetHeader(HANDLE_SBR_ENCODER   sbrEncoder,
-                          HANDLE_FDK_BITSTREAM hBs,
-                          INT            element_index,
-                          int            fSendHeaders);
-
-/**
- * \brief              SBR encoder bitrate estimation.
- * \param hSbrEncoder  SBR encoder handle.
- * \return             Estimated bitrate.
- */
-INT sbrEncoder_GetEstimateBitrate(HANDLE_SBR_ENCODER hSbrEncoder);
-
-
-/**
- * \brief              Delay between input data and downsampled output data.
- * \param hSbrEncoder  SBR encoder handle.
- * \return             Delay.
- */
-INT sbrEncoder_GetInputDataDelay(HANDLE_SBR_ENCODER hSbrEncoder);
-
-/**
- * \brief       Get decoder library version info.
- * \param info  Pointer to an allocated LIB_INFO struct, where library info is written to.
- * \return      0 on sucess.
- */
-INT sbrEncoder_GetLibInfo(LIB_INFO *info);
-
-void sbrPrintRAM(void);
-
-void sbrPrintROM(void);
-
-#ifdef __cplusplus
-        }
-#endif
-
-#endif /* ifndef __SBR_MAIN_H */