Remove FDK-AAC

1 files changed, 0 insertions, 337 deletions

diff --git a/libSBRdec/include/sbrdecoder.h b/libSBRdec/include/sbrdecoder.h
deleted file mode 100644
index 13707e0..0000000
--- a/libSBRdec/include/sbrdecoder.h
+++ /dev/null
@@ -1,337 +0,0 @@
-
-/* -----------------------------------------------------------------------------------------------------------
-Software License for The Fraunhofer FDK AAC Codec Library for Android
-
-© Copyright  1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.
-  All rights reserved.
-
- 1.    INTRODUCTION
-The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements
-the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio.
-This FDK AAC Codec software is intended to be used on a wide variety of Android devices.
-
-AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual
-audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by
-independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part
-of the MPEG specifications.
-
-Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer)
-may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners
-individually for the purpose of encoding or decoding bit streams in products that are compliant with
-the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license
-these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec
-software may already be covered under those patent licenses when it is used for those licensed purposes only.
-
-Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality,
-are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional
-applications information and documentation.
-
-2.    COPYRIGHT LICENSE
-
-Redistribution and use in source and binary forms, with or without modification, are permitted without
-payment of copyright license fees provided that you satisfy the following conditions:
-
-You must retain the complete text of this software license in redistributions of the FDK AAC Codec or
-your modifications thereto in source code form.
-
-You must retain the complete text of this software license in the documentation and/or other materials
-provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form.
-You must make available free of charge copies of the complete source code of the FDK AAC Codec and your
-modifications thereto to recipients of copies in binary form.
-
-The name of Fraunhofer may not be used to endorse or promote products derived from this library without
-prior written permission.
-
-You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec
-software or your modifications thereto.
-
-Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software
-and the date of any change. For modified versions of the FDK AAC Codec, the term
-"Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term
-"Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android."
-
-3.    NO PATENT LICENSE
-
-NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer,
-ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with
-respect to this software.
-
-You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized
-by appropriate patent licenses.
-
-4.    DISCLAIMER
-
-This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors
-"AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties
-of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages,
-including but not limited to procurement of substitute goods or services; loss of use, data, or profits,
-or business interruption, however caused and on any theory of liability, whether in contract, strict
-liability, or tort (including negligence), arising in any way out of the use of this software, even if
-advised of the possibility of such damage.
-
-5.    CONTACT INFORMATION
-
-Fraunhofer Institute for Integrated Circuits IIS
-Attention: Audio and Multimedia Departments - FDK AAC LL
-Am Wolfsmantel 33
-91058 Erlangen, Germany
-
-www.iis.fraunhofer.de/amm
-amm-info@iis.fraunhofer.de
------------------------------------------------------------------------------------------------------------ */
-
-/************************  Fraunhofer IIS SBR decoder library ******************
-
-   Author(s):
-   Description: SBR decoder front-end prototypes and definitions.
-
-******************************************************************************/
-
-#ifndef __SBRDECODER_H
-#define __SBRDECODER_H
-
-#include "common_fix.h"
-
-#include "FDK_bitstream.h"
-#include "FDK_audio.h"
-
-
-#define SBR_DEBUG_EXTHLP "\
---- SBR ---\n\
-    0x00000010 Ancillary data and SBR-Header\n\
-    0x00000020 SBR-Side info\n\
-    0x00000040 Decoded SBR-bitstream data, e.g. envelope data\n\
-    0x00000080 SBR-Bitstream statistics\n\
-    0x00000100 Miscellaneous SBR-messages\n\
-    0x00000200 SBR-Energies and gains in the adjustor\n\
-    0x00000400 Fatal SBR errors\n\
-    0x00000800 Transposer coefficients for inverse filtering\n\
-"
-
-/* Capability flags */
-#define CAPF_SBR_LP          0x00000001   /*!< Flag indicating library's capability of Low Power mode.            */
-#define CAPF_SBR_HQ          0x00000002   /*!< Flag indicating library's capability of High Quality mode.         */
-#define CAPF_SBR_DRM_BS      0x00000004   /*!< Flag indicating library's capability to decode DRM SBR data.       */
-#define CAPF_SBR_CONCEALMENT 0x00000008   /*!< Flag indicating library's capability to conceal erroneous frames.  */
-#define CAPF_SBR_DRC         0x00000010   /*!< Flag indicating library's capability for Dynamic Range Control.    */
-#define CAPF_SBR_PS_MPEG     0x00000020   /*!< Flag indicating library's capability to do MPEG Parametric Stereo. */
-#define CAPF_SBR_PS_DRM      0x00000040   /*!< Flag indicating library's capability to do DRM Parametric Stereo.  */
-
-typedef enum
-{
-  SBRDEC_OK = 0,                       /*!< All fine.                                                       */
-  /* SBRDEC_CONCEAL,                                                                                        */
-  /* SBRDEC_NOSYNCH,                                                                                        */
-  /* SBRDEC_ILLEGAL_PROGRAM,                                                                                */
-  /* SBRDEC_ILLEGAL_TAG,                                                                                    */
-  /* SBRDEC_ILLEGAL_CHN_CONFIG,                                                                             */
-  /* SBRDEC_ILLEGAL_SECTION,                                                                                */
-  /* SBRDEC_ILLEGAL_SCFACTORS,                                                                              */
-  /* SBRDEC_ILLEGAL_PULSE_DATA,                                                                             */
-  /* SBRDEC_MAIN_PROFILE_NOT_IMPLEMENTED,                                                                   */
-  /* SBRDEC_GC_NOT_IMPLEMENTED,                                                                             */
-  /* SBRDEC_ILLEGAL_PLUS_ELE_ID,                                                                            */
-  SBRDEC_CREATE_ERROR,                 /*!<                                                                 */
-  SBRDEC_NOT_INITIALIZED,              /*!<                                                                 */
-  SBRDEC_MEM_ALLOC_FAILED,             /*!< Memory allocation failed. Probably not enough memory available. */
-  SBRDEC_PARSE_ERROR,                  /*!<                                                                 */
-  SBRDEC_UNSUPPORTED_CONFIG,           /*!<                                                                 */
-  SBRDEC_SET_PARAM_FAIL                /*!<                                                                 */
-} SBR_ERROR;
-
-typedef enum
-{
-  SBR_SYSTEM_BITSTREAM_DELAY,          /*!< System: Switch to enable an additional SBR bitstream delay of one frame. */
-  SBR_QMF_MODE,                        /*!< Set QMF mode, either complex or low power. */
-  SBR_LD_QMF_TIME_ALIGN,               /*!< Set QMF type, either LD-MPS or CLDFB. Relevant for ELD streams only. */
-  SBR_BS_INTERRUPTION                  /*!< Signal bit stream interruption. Value is ignored. */
-} SBRDEC_PARAM;
-
-typedef struct SBR_DECODER_INSTANCE *HANDLE_SBRDECODER;
-
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-
-/**
- * \brief        Allocates and initializes one SBR decoder instance.
- * \param pSelf  Pointer to where a SBR decoder handle is copied into.
- * \return       Error code.
- */
-SBR_ERROR sbrDecoder_Open ( HANDLE_SBRDECODER *pSelf );
-
-/**
- * \brief  Initialize a SBR decoder runtime instance. Must be called before decoding starts.
- *
- * \param self             Handle to a SBR decoder instance.
- * \param sampleRateIn     Input samplerate of the SBR decoder instance.
- * \param sampleRateOut    Output samplerate of the SBR decoder instance.
- * \param samplesPerFrame  Number of samples per frames.
- * \param coreCodec        Audio Object Type (AOT) of the core codec.
- * \param elementID        Table with MPEG-4 element Ids in canonical order.
- * \param forceReset       Flag that enforces a complete decoder reset.
- *
- * \return  Error code.
- */
-SBR_ERROR sbrDecoder_InitElement (
-        HANDLE_SBRDECODER       self,
-        const int               sampleRateIn,
-        const int               sampleRateOut,
-        const int               samplesPerFrame,
-        const AUDIO_OBJECT_TYPE coreCodec,
-        const MP4_ELEMENT_ID    elementID,
-        const int               elementIndex
-        );
-
-/**
- * \brief pass out of band SBR header to SBR decoder
- *
- * \param self         Handle to a SBR decoder instance.
- * \param hBs          bit stream handle data source.
- * \param elementID    SBR element ID.
- * \param elementIndex SBR element index.
- *
- * \return  Error code.
- */
-INT sbrDecoder_Header (
-        HANDLE_SBRDECODER       self,
-        HANDLE_FDK_BITSTREAM    hBs,
-        const INT sampleRateIn,
-        const INT sampleRateOut,
-        const INT samplesPerFrame,
-        const AUDIO_OBJECT_TYPE coreCodec,
-        const MP4_ELEMENT_ID    elementID,
-        const INT               elementIndex
-        );
-
-/**
- * \brief        Set a parameter of the SBR decoder runtime instance.
- * \param self   SBR decoder handle.
- * \param param  Parameter which will be set if successfull.
- * \param value  New parameter value.
- * \return       Error code.
- */
-SBR_ERROR sbrDecoder_SetParam ( HANDLE_SBRDECODER   self,
-                                const SBRDEC_PARAM  param,
-                                const INT           value );
-
-/**
- * \brief  Feed DRC channel data into a SBR decoder runtime instance.
- *
- * \param self                    SBR decoder handle.
- * \param ch                      Channel number to which the DRC data is associated to.
- * \param numBands                Number of DRC bands.
- * \param pNextFact_mag           Pointer to a table with the DRC factor magnitudes.
- * \param nextFact_exp            Exponent for all DRC factors.
- * \param drcInterpolationScheme  DRC interpolation scheme.
- * \param winSequence             Window sequence from core coder (eight short or one long window).
- * \param pBandTop                Pointer to a table with the top borders for all DRC bands.
- *
- * \return  Error code.
- */
-SBR_ERROR sbrDecoder_drcFeedChannel ( HANDLE_SBRDECODER  self,
-                                      INT                ch,
-                                      UINT               numBands,
-                                      FIXP_DBL          *pNextFact_mag,
-                                      INT                nextFact_exp,
-                                      SHORT              drcInterpolationScheme,
-                                      UCHAR              winSequence,
-                                      USHORT            *pBandTop );
-
-/**
- * \brief  Disable SBR DRC for a certain channel.
- *
- * \param hSbrDecoder  SBR decoder handle.
- * \param ch           Number of the channel that has to be disabled.
- *
- * \return  None.
- */
-void sbrDecoder_drcDisable ( HANDLE_SBRDECODER  self,
-                             INT                ch );
-
-
-/**
- * \brief  Parse one SBR element data extension data block. The bit stream position will
- *         be placed at the end of the SBR payload block. The remaining bits will be returned
- *         into *count if a payload length is given (byPayLen > 0). If no SBR payload length is
- *         given (bsPayLen < 0) then the bit stream position on return will be random after this
- *         function call in case of errors, and any further decoding will be completely pointless.
- *
- * \param self           SBR decoder handle.
- * \param hBs            Bit stream handle as data source.
- * \param count          Pointer to an integer where the amount of parsed SBR payload bits is stored into.
- * \param bsPayLen       If > 0 this value is the SBR payload length. If < 0, the SBR payload length is unknown.
- * \param flags          CRC flag (0: EXT_SBR_DATA; 1: EXT_SBR_DATA_CRC)
- * \param prev_element   Previous MPEG-4 element ID.
- * \param element_index  Index of the current element.
- *
- * \return  Error code.
- */
-SBR_ERROR sbrDecoder_Parse (
-        HANDLE_SBRDECODER  self,
-        HANDLE_FDK_BITSTREAM hBs,
-        int *count,
-        int  bsPayLen,
-        int  crcFlag,
-        MP4_ELEMENT_ID prev_element,
-        int element_index,
-        int fGlobalIndependencyFlag
-        );
-
-/**
- * \brief  This function decodes the given SBR bitstreams and applies SBR to the given time data.
- * 
- * SBR-processing works InPlace. I.e. the calling function has to provide
- * a time domain buffer timeData which can hold the completely decoded
- * result.
- *
- * Left and right channel are read and stored according to the
- * interleaving flag, frame length and number of channels.
- *
- * \param self            Handle of an open SBR decoder instance.
- * \param hSbrBs          SBR Bitstream handle.
- * \param timeData        Pointer to input and finally upsampled output data.
- * \param numChannels     Pointer to a buffer holding the number of channels in time data buffer.
- * \param sampleRate      Output samplerate.
- * \param channelMapping  Channel mapping indices.
- * \param interleaved     Flag indicating if time data is stored interleaved (1: Interleaved time data, 0: non-interleaved timedata).
- * \param coreDecodedOk   Flag indicating if the core decoder did not find any error (0: core decoder found errors, 1: no errors).
- * \param psDecoded       Pointer to a buffer holding a flag. Input: PS is possible, Output: PS has been rendered.
- *
- * \return  Error code.
- */
-SBR_ERROR sbrDecoder_Apply ( HANDLE_SBRDECODER    self,
-                             INT_PCM             *timeData,
-                             int                 *numChannels,
-                             int                 *sampleRate,
-                             const UCHAR          channelMapping[(6)],
-                             const int            interleaved,
-                             const int            coreDecodedOk,
-                             UCHAR               *psDecoded );
-
-
-/**
- * \brief       Close SBR decoder instance and free memory.
- * \param self  SBR decoder handle.
- * \return      Error Code.
- */
-SBR_ERROR sbrDecoder_Close ( HANDLE_SBRDECODER *self );
-
-
-/**
- * \brief       Get SBR decoder library information.
- * \param info  Pointer to a LIB_INFO struct, where library information is written to.
- * \return      0 on success, -1 if invalid handle or if no free element is available to write information to.
- */
-INT sbrDecoder_GetLibInfo( LIB_INFO *info );    
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif